Assembly Icons
?+↩️Carefully score and fold this part.
❓This part, or its placement, is completely optional.
?Look closely at this step. The process order or part used may be specific.
? x2Repeat making this part the specified number of times.
?The next instruction step will be the same assembly so far, but from a different angle.
✅Sub-assembly complete. This smaller construction is ready to add to the main kit.
?Assembly Complete! There could be more optional parts - check to the very end of instructions.
⚠️FRAGILE: DO NOT BEND. "Bendy wood" is designed to curve around a designed frame only.
Assembly Steps
Step 3
A purple rectangular piece with two horizontal slots is shown above a grey, multi-sectioned base piece. A dashed line indicates the intended alignment for attachment.
Step 4
The grey piece from the previous step is shown attached to the grey base. A separate purple base piece is depicted below, with dashed lines indicating its connection point to the main structure.
Step 5
A sub-assembly composed of several grey interlocking pieces is shown. A prominent "x2" icon indicates that this specific sub-assembly needs to be constructed twice.
Step 6
An exploded view shows a purple piece with multiple slots and tabs, a grey base structure, and another grey component. Dashed lines illustrate how these parts connect.
Step 7
A sub-assembly of grey pieces is depicted, showing a partially constructed section of the model.
Step 8
An exploded view displays a grey structure and two identical purple pieces. These purple pieces have interlocking tabs designed to fit into the grey structure, as indicated by dashed lines.
Step 9
An exploded view shows a grey base piece and three distinct purple components. Dashed lines illustrate the intended connection points for these purple pieces to the base.
Step 10
An exploded view reveals multiple grey components and a large, flat purple base. Dashed lines indicate the assembly sequence. Text reads: "Connect all white pieces together, followed by purple."
Step 11
An exploded view shows two small purple hinge pieces and a larger purple hatch door, positioned above a grey structure. Dashed lines indicate attachment. Text reads: "Glue hinges to hatch door but not to the floor. It can be positioned opened or closed."
Step 12
An exploded view shows a purple ladder component above a grey structure. Dashed lines indicate its placement. Text reads: "Ladder is optional and ideal for when using the Roof Topper on the core kit." An optional icon (❓) is also present.
Step 13
An exploded view depicts a tall, slender purple structure, a smaller purple connecting piece, and a grey base. Dashed lines show how these parts are intended to fit together.
Step 14
The grey base and the lower section of the main structure are shown assembled.
Step 15
An exploded view shows the tall purple structure from Step 13, positioned above the assembled grey base structure from Step 14. Dashed lines indicate the connection.
Step 16
The tall purple structure is shown being attached to the assembled grey base structure. Dashed lines indicate the alignment and connection points.
Step 17
The tall purple structure is shown partially attached to the assembled grey base structure, illustrating the ongoing assembly process.
Step 18
The main grey base structure of the Roof Topper is shown fully assembled.
Step 19
An exploded view shows the tall purple structure being attached to the assembled grey base structure. Dashed lines indicate the connection points.
Step 20
The tall purple structure is shown attached to the assembled grey base structure, continuing the assembly.
Step 21
An exploded view shows the assembled grey structure and a small, U-shaped purple component. Dashed lines indicate its placement on the structure.
Step 22
An exploded view shows the assembled grey structure and a small, U-shaped purple component. Dashed lines indicate its placement on the structure, from a different angle than Step 21.
Step 23
An exploded view shows the assembled grey structure and a small, U-shaped purple component. Dashed lines indicate its placement on the structure, from another angle.
Step 24
An exploded view shows the assembled grey structure and a large, flat green panel. Dashed lines indicate the panel's attachment point to the top of the structure.
Step 25
The large green panel is shown attached to the top of the assembled grey structure, forming the main visual element of the Roof Topper.
Step 26
An exploded view shows a tall purple structure featuring the text "SPLENDOUR HEIGHTS" and the number "4" on its face. This is positioned above a grey structure. Text reads: "Roof Topper can replace Mule: Core - roof." A "do not glue" icon (?) is present.
Step 27
The fully assembled "Mule: Roof Topper" is shown, featuring the green panel with text elements (including "SPLENDOUR HEIGHTS").
Step 28
Two views of the completed "Mule: Roof Topper" are presented, showcasing the assembled model with the green panel. The green panel displays decorative text elements, including what appears to be stylized characters and symbols.
Models: TTSCW-SFU-143 Mule Roof Topper, TTSCW-SFU-143, Mule Roof Topper, Roof Topper, Topper
