Tabletop Scenics
TTSCW-SFU-111 Mod.Co.N 2x2 Straights
Assembly Guide
These instructions guide the assembly of the Tabletop Scenics TTSCW-SFU-111 Mod.Co.N 2x2 Straights model kit. Familiarize yourself with the following icons:
- ? [Do not glue this part]
- ? [Carefully score and fold this part]
- ❓ [This part - or its placement is completely optional]
- ? [Look closely at this step - The process order or part used, may be specific]
- ? [Repeat making this part the specified number of times]
- ? [The next instruction step will be the same assembly so far, but from a different angle]
- ✔️ [Sub-assembly complete. This smaller construction is ready to add to the main kit]
- ✅ [Assembly Complete! There could be more optional parts - check to the very end of instructions]
- ⚠️ [FRAGILE: DO NOT BEND. "Bendy wood" is designed to curve around a designed frame only.]
Step 3
Attach two purple, T-shaped pieces to a flat white base with two slots. Dashed lines indicate attachment points.
Step 4
Attach a large purple piece with a grid pattern and a circular detail on top to a white base structure with two upright supports. Dashed lines indicate attachment.
Step 5
Attach a purple piece with numerous small circles and rectangular cutouts to two white upright support pieces. Dashed lines indicate attachment.
Step 6
Attach a large purple panel with multiple rectangular cutouts and circular details to the white base structure from Step 5. Dashed lines indicate attachment.
Step 7
Attach a purple, Y-shaped piece to the structure built in previous steps. Dashed lines and cross-hatching indicate alignment and connection points.
Step 8
Attach a purple piece with a grid pattern and circular detail to a white base structure with two upright supports. This forms a second section.
Step 9
Attach two purple, T-shaped pieces to the structure built in Step 8. Dashed lines indicate attachment.
Step 10
Attach a purple piece with numerous small circles and rectangular cutouts to two white upright support pieces. Dashed lines indicate attachment.
Step 11
Attach a large purple panel with multiple rectangular cutouts and circular details to the white base structure from Step 10. Dashed lines indicate attachment.
Step 12
Attach a purple, Y-shaped piece to the structure built in previous steps. Dashed lines and cross-hatching indicate alignment and connection points.
Step 13
The image shows a partially assembled wall section with a central panel and supporting structures, representing the combined result of earlier steps.
Step 14
Attach the assembled wall section from Step 13 to the base structure from Step 4. Dashed lines indicate attachment.
Step 15
Attach two purple, T-shaped pieces to the structure built in Step 14. Dashed lines indicate attachment.
Step 16
The image shows two identical structures assembled side-by-side, indicated by the 'x2' icon. This represents the completion of two 2x2 Straights units.
Step 17
The assembly is complete. The final image shows two fully assembled 2x2 Straights units joined together, indicated by the green checkmark icon.
