Assembly Instructions
Caution: You must read this before you proceed
Please look the leg for hardware packs
BENCH
Caution: This Bench is NOT a TOY.
Keep your child / children at bay during the assembly process.
Whenever lifting or moving the Bench and to prevent damage to the Bench, two adults may be needed to execute these actions.
An isometric illustration of a wooden bench.
Parts List
| Label | Picture | Description | QTY |
|---|---|---|---|
| A | [Bench Seat with Foldable Legs] | Bench Seat with Foldable Legs | 1 |
Hardware
| Label | Picture | Description | QTY |
|---|---|---|---|
| 1 | [Bolt M8x60mm] | Bolt (M8x60mm) | 5 |
| 2 | [Bolt M8x45mm] | Bolt (M8x45mm) | 7 |
| 3 | [Allen Wrench] | Allen Wrench | 1 |
Assembly Preparation
Before Beginning Assembly:
- ??? Read instructions, cover to cover-
- ??_2_ adults on hand for assembly-
- ❌ Do not assemble on flooring or carpet-
- ? Assemble on a clean non-marring surface (packing foam)-
- ? Save all packaging until finished-
Diagram showing the bench seat, legs, bolts, and Allen wrench laid out for assembly preparation.
Assembly Steps
Overview
Overview diagram of the bench components, labeling the 'Bench Seat with Foldable Legs (A)' and 'Leg', with a 'FRONT FACING' indicator.
Step 1
Illustration of all parts unpacked and arranged on a clean surface.
Unpack and place all parts on a clean, non-marring surface.
Step 2
Illustration showing the bench seat placed face down and the legs being folded out to align with the base.
Place the Bench Seat with Foldable Legs(A) facedown, onto a clean, non-marring surface. Fold out the Legs until the braces are flush with the base of the Bench Seat with Foldable Legs(A), as shown in the above picture.
Step 3
Close-up views illustrating the attachment of the legs using Bolts (2) and Allen Wrench (3). A note indicates not to fully tighten bolts.
3.1) Secure Legs using Bolts (2) with Allen Wrench (3) as pictured above.
3.2) Secure Legs using Bolts (2) with Allen Wrench (3) as shown above.
Do not fully tighten the Bolts.
Step 4
Close-up view illustrating the attachment of the legs using Bolts (1) and Allen Wrench (3). A note indicates not to fully tighten bolts.
Secure Legs using Bolts (1) with Allen Wrench (3) as pictured above. Do not fully tighten the Bolts.
Step 5
Illustration of the bench standing upright, ready for use.
Stand the Bench up, with assistance from your adult partner. Exert pressure floorwards, onto the Bench with both your hands. This pressure will help the Legs and Bench Seat reach full alignment status. Check for wobbles on a LEVEL surface. If no wobbles are found proceed to tighten the Bolts in a sequential manner, until evenly secured. When tightening the Bolts tighten sequentially. Do not tighten any Bolt fully and then move on towards the next one. If there are still wobbles, loosen the Bolts and excute the same above process. Your Bench is ready for use. This Bench can only be used on the flat, level surface.
Care & Maintenance
- ⚠️? Do not put hot items directly on furniture surface
- ❌? Do not clean furniture with harsh cleansers or polish.
- ☀️ To obtain the longest lifespan of your outdoor products, minimizing exposure to direct sunlight is recommended.
- ?❌ Children should not climb or jump on the furniture.
- ✍️❌ Do not write on furniture without a padded barrier to protect the surface.
- ?️❄️❌ Avoid extended exposure to rain, snow, and direct sunshine. Cover product or place under patio or awnings when possible.
- ? For residential use only. Not for commercial use.
- ?? Stains may be removed with mild soap solution and damp cloth.
- ?? Dust and pick-up spills using a clean, non-colored, lint-free cloth.
