Installation Guide for HOOKE ROAD models including: BXG.8542, BXG.8542 Front Bumper, Front Bumper, Bumper

BXG.8542

Hooke Road Bumper Installation Instructions | Installation Manual – Hooke Road 4x4

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 4 Pages, 1.67MB

Document Document

MAKE A DIFFERENCE

Front Bumper

BXG.8542
(INSTALLATION INSTRUCTION)

Please verify all parts are present and read instructions carefully before starting installation. Please feel free to contact your distributor if you have any kind of question about your purchase.

1 CONTENTS

Left

Right

B1

A

C1

C2

B2 D

A: Main Body
Qty Part Name 2 Hex Bolt

B1&B2: Wings C1&C2: License Plate Bracket D: Mounting Brackets

Size(mm) M12*110

Picture

Qty Part Name 22 Flat Washer

Size(mm) M12*30*1.5

Picture

4 Hex Bolt

M12*35

4 Flat Washer

M6*12*1

10 Hex Bolt

M12*30

2 Hex Bolt Plate

M12*35

4 Button Bolt

M6*16

16 Split Lock Washer

D12

2 TOOLS REQUIRED

2 Nylon Round Spacer M6*12*1.3

12 Hex Nut

M12

4 Nylon Lock Nut

M6

2 EVA

To view online instruction, please scan the QR code.

Drive Ratchet Handle

10mm, 19mm Wrench

4mm Hex Bit Socket

3 INSTALLATION INSTRUCTION
Step 1
Stick the EVA to the bumper and install the left wing to the main body using (3) M12x30mm hex bolts, (3) D12 lock washers, (3) M12x30x1.5mm flat washers, (3) M12 hex nuts. Repeat this step for the opposite of the bumper. Tighten the hardware.
EVA 


Step 2
Assemble the license plate brackets using the (2)M6x16mm button bolts, (2) M6x12x1mm flat washers, (2) M6x12x1.3mm nylon round spacer, (2) M6 nylon lock nuts. Install the assembled license plate bracket to the bumper using the (2)M6x16mm button bolts, (2) M6x12x1mm flat washers, (2) M6 nylon lock nuts. Tighten the hardware.

Step 3
Install the mounting bracket to the bumper using the (2) M12x30mm hex bolts, (2) D12 lock washers, (2) M12*30*1.5 flat washers. Repeat this step for the opposite of the bumper. Tighten all bolts.



 

F-150 INSTALLATION INSTRUCTION
Place the vehicle in park, remove the factory bumper from the frame.
21
Place the hex bolt plate to the vehicle. Repeat this step for the opposite of the vehicle.
2

Step 4 Step 5

Step 6
Install the bumper to the vehicle using the (2) M12x35mm hex bolts, (2) D12 lock washers, (4) M12*30*1.5 flat washers, (2) M12 hex nuts. Repeat this step for the opposite of the vehicle. Do not fully hardware to allow adjustability.
1





Step 7
Install the hex bolt plate to the bumper using the (1)M12*30*1.5 flat washers, (1) M12 hex nuts. Repeat this step for the opposite of the vehicle. Adjust the bumper to the desired location. At last, tighten up all bolts and nuts.
2



F-250 INSTALLATION INSTRUCTION

Place the vehicle in park, remove the factory bumper from the frame.

Step 8

1

2

2

Step 9
Install the bumper to the vehicle using the (1) M12x110mm hex blots, (2) M12x35mm hex bolts, (3) D12 lock washers, (6) M12*30*1.5 flat washers, (3) M12 hex nuts. Repeat this step for the opposite of the vehicle. Do not fully hardware to allow adjustability.
1

2







Step 10
The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!

to find your parts.

Feel Free To Share Your Vehicle @HookeRoad4x4 With The Hashtag #hookeroad If You'd Like