Magene Heart Rate Monitor - Model H003

Product Introduction

The Magene Heart Rate Monitor is a device that monitors your heart rate during sports. It supports ANT+ and Bluetooth wireless protocols, enabling data transmission to compatible devices such as mobile apps, bike computers, and sports watches. This allows for scientific and enjoyable training by recording each heartbeat.

Key Features:

• Supports ANT+ and Bluetooth protocols.
• Compatible with various smart devices and apps.
• Uses a CR2032 battery.
• Waterproof rating: IP67.

Model: H003

Product Use Instructions

1. Strap Preparation: Wet the electrode areas on the reverse side of the strap.
2. Sensor Attachment: Press the snap studs on the sensor into the corresponding sockets on the strap, ensuring the Magene font is facing upright for accurate readings.
3. Wearing the Strap: Wrap the strap around your chest and attach the hook to the other end. Position the sensor below your chest so the electrodes contact your skin.
4. Automatic Activation: Once worn correctly, the sensor will automatically turn on.
5. Connection: Select the correct ANT ID or Bluetooth ID on your bike computer, watch, or app to receive heart rate data.

Placement Illustrations: Visual guides are provided for correct placement on men and women.

Device Connection Instructions

• Ensure the device is worn correctly before attempting to connect.
• Smartphone App Connection: Search for the heart rate monitor within the app. Direct connection via the phone's system Bluetooth settings is not supported.
• Bluetooth Protocol: Can only connect to one device or app at a time. Disconnect from previous connections before pairing with a new one.
• ANT+ Protocol: Can be connected to by multiple devices simultaneously.
• Power Saving: The sensor automatically enters sleep mode after 30 seconds of removal to conserve power.

Product Specifications

• Accessories: Sensor*1, CR2032 Battery*1, Strap*1
• Weight: 13g
• Heart Rate Range: 30~240 BPM
• Protocols: Bluetooth & ANT+
• Connecting Distance: Bluetooth: 10m, ANT+: 6m
• Battery Life: 1000 Hours (actual life may vary)
• Waterproof Rating: IP67
• Sensor Dimensions: 57.6*33*11mm
• Strap Length: 64~86cm (±2cm)

Battery Replacement

1. Unlock: Open the battery compartment by turning the battery cover counterclockwise from the lock position to the unlocked position.
2. Replace Battery: Insert a new CR2032 battery, aligning the marker on the cover with the unlocked indicator.
3. Lock: Press the battery cover fully into place and turn it clockwise to align the indicator with the locked position.

Frequently Asked Questions (FAQ)

1. Device Discovery Issues:
   • Ensure the chest strap sensing area is wet.
   • Check for foreign contaminants on the battery connector or ensure the spring is properly positioned.
   • Verify the battery is charged; try replacing it.
   • Confirm the app/device supports the Magene heart rate monitor.
   • For Bluetooth, ensure the monitor is not connected to other devices/apps.
2. Sports Compatibility: The monitor can be used for most sports including cycling, fitness, football, tennis, running, and basketball, but not swimming.
3. Smartphone Bluetooth Connection Issues: Connection must be made through the specific app, not the phone's native Bluetooth settings.
4. Cleaning Instructions: Rinse with water after each use. Periodically clean the strap with diluted soapy water and rinse thoroughly. Do not use washing machines, dryers, or chemical cleaners.
5. Battery Life: Approximately 1000 hours, subject to environmental factors.

Firmware Updates

Install the Magene Utility app on a Bluetooth-enabled smartphone and connect to the heart rate monitor to receive the latest firmware updates.

App Download

Information on downloading the Magene Utility app is available.

Support and More Information

• Email: support@magenefitness.com
• Website: www.magenefitness.com
• Manuals: www.magenefitness.com/manuals.html

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Warning: The device meets general RF exposure requirements and can be used in portable conditions without restriction.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If interference occurs, users are encouraged to try correcting it by reorienting or relocating the receiving antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer/technician.

Operating Frequencies: ANT+: 2457 MHz, BLE: 2402~2480 MHz