Saramonic Blink500 Pro HM
Handheld Microphone Adapter
Product Structure
The handheld adapter features the following components:
- ① Charging Contacts: Connects to the charging case.
- ② Power Indicator: Displays charging status. Solid Red Light indicates the adapter is charging. Solid Blue Light indicates the adapter is charging the transmitter (TX).
- ③ Power Button: Used to turn the device on/off.
- ④ Handheld Holder: Secures the transmitter.
- ⑤ Belt-clip Slot: Allows attachment to a belt clip.
- ⑥ Pair Button: Used for pairing the system.
- ⑦ USB-C Charging Port: For charging the adapter.
Quick Setup Guide
Step 1: Hold open the belt clip of the transmitter and slide it onto the belt clip slot of the handheld adapter.
[Diagram: Transmitter belt clip inserted into the adapter's slot]
Step 2: Press and hold the power button (③) of the Blink500 Pro HM for 3 seconds to turn on the handheld adapter.
[Diagram: Finger pressing the POWER button on the adapter]
Step 3: The transmitter will be charged automatically when it is attached in place. (Note: The Blink500 Pro TX transmitter is sold separately).
[Diagram: Transmitter attached to the adapter, showing a charging connection]
How to Pair?
If the TX and RX are already paired in the charging case, pairing with the HM adapter is unnecessary. Follow these steps if re-pairing is needed:
- Hold open the belt clip of the transmitter and slide it onto the belt clip slot of the handheld adapter.
- Hold down the power button of the Blink500 Pro HM for 3 seconds to turn on the handheld adapter.
- Hold down the power buttons of the Blink500 Pro TX and RX to turn them on. Then, place the receiver (RX) back in the charging case.
- While the TX & RX are both on, and with the receiver in the charging case and the transmitter inserted into the handheld adapter, simultaneously press both the pairing button on the charging case and the pairing button (⑥) on the handheld adapter.
- The system is successfully paired when the pairing indicators on the RX's and TX's OLED displays both show "»".
- You are ready to record.
Packing Lists
- Saramonic Blink500 Pro HM Handheld Microphone Holder x1
- Foam Windscreen x1
- USB-C Charging Cable x1
Specifications
| Feature | Details |
|---|---|
| Power Capacity | Built-in Li-ion Battery 3.7V/1100mAh |
| Charging Port | USB-C |
| Dimensions | 206.7x38.1x25.2mm (8.1x1.5x1") |
| Weight | Approx. 68.5g (2.4 oz.) |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to +55°C |
