Bubendorff Mono ID3 Solar Roller Shutter
An overview of the Mono ID3 roller shutter, featuring solar and hybrid motors, designed for easy installation and discreet integration, ideal for renovation projects.
Key Features and Benefits
The Mono ID3 roller shutter, equipped with solar and hybrid motors and a visible trunk, is designed for easy and discreet integration, making it an excellent choice for renovation projects. The ID3 range is exclusively for professionals, offered at a single price regardless of dimensions.
4 Good Reasons to Choose the Mono ID3:
- More Brightness: With a height of 13cm or 16.5cm, this roller shutter maximizes light entry into your room. The box design features no visible screws for enhanced discretion.
- Optimal Integration of the Solar Panel: The solar panel is seamlessly integrated into the shutter's box, ensuring a discreet appearance.
- Easy to Install: The Mono ID3 is installed quickly and easily, as it requires no electrical connection work, thanks to its integrated battery.
- Improved Comfort with Adjustable Slats Option: This option allows for natural ventilation and fine control over sunlight. It offers the benefits of concealment, security, and an adjustable sunshade.
Differences Compared to the ID+ Range:
- Unlike the ID+ range, where the panel offset for the solar motor costs €44 for a Mono roller shutter, the PV offset for the ID3 range does not impact the final price.
- The box features a rear cutaway, facilitating cable passage and simplifying motor connection.
Installation and Design
Unlike the Tradi ID3, the Mono ID3 roller shutter is installed externally, under the lintel and on the facade. The product is delivered with a protective aluminum box.
Characteristics of the Solar ID3 Roller Shutter:
- Max width: 3000 mm
- Max height: 2672 mm (Slide height: 300 mm to 2500 mm)
- Bubendorff radio transmitter included.
- Available in 8 standard apron shades and 10 frame shades.
- Bubendorff offers a 3-year warranty covering parts, labor, and travel, including the battery and solar collector. Warranty extensions between 5 and 10 years are possible.
- Two box sizes are available in two different shapes (1x20° and 2x20°), each with an embedded solar panel.
- Apron slats are made of aluminum (dp368) and are adjustable.
Rules for Installing the Solar Collector:
- Position the solar collector (PV panel) outdoors.
- Clear any obstacles in front of the sensor, such as:
- Glazing
- Swing shutters
- Other obstructions
- In areas with heavy snow, positioning the vertical panel on the facade is mandatory.
- For optimal control function, the sensor must be located near the shutter, on the same facade.
Illustrates installation clearances for a roller shutter on a house. A side view shows measurements for b maxi = Ax2, A (height of PV panel top from ground/floor), and H (height to consider from ground/floor). A top view depicts clearances relative to walls or dense hedges. It notes that for direct sunlight, conditions A and H must be met.
Shows a multi-story building with roller shutters, indicating approximate heights of different levels (e.g., ≈3m, 1m).
Diagram: Solar Collector Installation RulesDepicts icons representing potential obstacles to the solar collector sensor, including glazing, a swing shutter, and a dense hedge. It indicates "1 single 3-meter connector" and a minimum installation angle of 30°.
Box Dimensions
Presents dimensions for two apron types: "Tablier 368" and "Tablier OR". Both offer box configurations with 20° and 2x20° angles. For "Tablier 368", dimensions include 130x147 (width x depth) with a height of 1500mm (total height 2672mm) and 165x182 (width x depth) with a height of 1330mm (total height 2500mm). For "Tablier OR", dimensions include 130x147 (width x depth) with a height of 1330mm (total height 2500mm) and 165x182 (width x depth) with a height of 1500mm (total height 2672mm). The maximum width for both is 3000mm.
Product Specifications
- Manufacturer: Bubendorff
- Origin: Europe
- Guarantee: 2 years (parts, labor, and travel for France)
- Type of Installation: N°4 - In the front / Under lintel
- Type of Control (Shutter): BUBENDORFF radio
Attachments
Downloadable documentation is available:
- Documentation MONO ID3 Solar (2,264 Kb) [Download]
- Guide to the choice of sustainable 2022 bubendorff (30,241 Kb) [Download]
- Solar 2022 Selection Guide (33,080 Kb) [Download]
- Flyer shutter id+ and id3 2022 (3,199 Kb) [Download]
- Manual additional transmitter (1,513 Kb) [Download]
- Manual 4 channel clock (6,178 Kb) [Download]
- Manual Mono ID3 (tablier 368 et OR) (2,100 Kb) [Download]
- Motorisation manual (motorisation and PV panel connection) (4,723 Kb) [Download]
Product Reviews
FREDERICK CHATELET - July 7, 2022
Rating: 5/5 Stars ⭐⭐⭐⭐⭐
Advantages: "I have been working with Bubendorff for 25 years. A very durable product, easy to install with a 7-year warranty covering parts, labor, and travel. What more could you ask for."
Comment: "I recommend Bubendorff. And I recommend the eco central. Very good follow-up, very correct pricing, and fast, tracked shipping."
Document created on: March 11, 2025
