Bubendorff iDiamant with Netatmo User Guide

In the Box

• 1. Connection Module (Gateway)
• 2. Power Plug

Installation Guide

Follow these steps to install your iDiamant device:

1. Connect the power plug to the connection module.
2. Plug the assembled unit into a power outlet. Ensure the Wi-Fi connection is stable (Wi-Fi OK).
3. The device will indicate it is ready.
4. Download the 'Legrand Home + Control' app from the App Store or Google Play.
5. Open the app and follow the on-screen instructions to set up your device.

Safety Warnings

This device must be installed according to applicable norms. Use only with the supplied power plug adapter. This device is for indoor use only. Do not attempt to repair the device yourself; customer service is available. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

Technical Specifications

• App: Free app, lifetime support. Available on the App Store and Google Play. Free access to your online personal dashboard. Accessible from multiple devices.
• Wireless Specifications: 802.11 b/g/n compatible (2.400-2.496 GHz @ 100mW). Supported security: Open/WEP/WPA/WPA2-personal (TKIP and AES). Wireless connection between the gateway and the shutters: long-range radio (868.95 MHz @16mW). Requirements: Wi-Fi router and Internet access. Public hotspots not supported.
• HomeKit: To control this HomeKit-enabled accessory, iOS 9.0 or later is recommended. Controlling this HomeKit-enabled accessory automatically and away from home requires an Apple TV with tvOS 10.0 or later or an iPad with iOS 10.0 or later set up as a home hub.

Declaration of Conformity

Bubendorff declares that this IDD01 device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and RoHS 2011/65/EC. It was manufactured in compliance with the following harmonised standards: EN 301 489-1 V2.2.0, EN 301 489-3 V2.1.1, EN 301 489-17 V3.2.0, EN 300 328 V2.1.1, EN 300 220-1 V3.1.1, EN 300 220-2 V3.1.1.

The original EU declaration of conformity may be found at: http://www.bubendorff.com

Legal Notice

Use of the Works with Apple HomeKit logo means that an electronic accessory has been designed to connect specifically to iPod, iPhone or iPad, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. iPhone, iPod and iPad are trademarks of Apple Inc., registered in the U.S. and other countries. HomeKit is a trademark of Apple Inc. App Store is a service trademark of Apple Inc. Android, Google Play and the Google Play logo are trademarks of Google LLC.

HomeKit Setup Code

EN: HomeKit setup code

DE: HomeKit-Konfigurationscode

ES: Código de configuración HomeKit

IT: Codice impostazione HomeKit

NL: HomeKit instelcode

PL: Kod konfiguracji HomeKit

For support, visit: http://support.bubendorff.com