eMeetLink User Manual
EMEET SmartCam Jupiter/C990
Device settings
Firstly, connect the device to the computer via USB cable. Open the eMeetLink software and enter the setting interface.
1. Firmware update
In the upper right corner, you can see your device's firmware version. Also, you can click the “Update” button to get the latest version.
Version: 0.6.1
2. Camera settings
(1) Image Flip
The image of this device supports flip horizontal or vertical. Check the "Flip Horizontal” button to validate the horizontal flip of the image. Check the "Flip Vertical” button to validate the vertical flip of the image.
Image flip
Horizontal flip
Vertical flip
(1) Zoom
You can zoom the screen from 60°-96° via eMeetLink.
96°78°60°
(2) Adjust the view
After zooming, you can click the up, down, left, and right icons on the eMeetLink to adjust the display position.
Video settings
(1) Filters
There are four filters mode for your choices: Default, Customize, Black and White, or Cartoons. You can select according to your needs.
- Default: In this mode, the other parameters such as brightness, contrast, sharpness, saturation, and white balance can not be adjusted.
- Black and White: In this mode, the image will be black and white.
- Cartoons: In this mode, you will get the image with a cartoon filter.
- Customize: In this mode, you can drag the slider to adjust the image parameters like brightness, contrast, sharpness, saturation, and white balance according to your needs.
Video
Filters
Default BlackWhite Cartoon
Customize
Anti-flicker
50Hz 60Hz
Brightness
Contrast
Sharpness
Saturation
White Balance
Auto
Restore defaults
(2) Anti-flicker
Most countries use 50HZ as the power grid operating frequency, and some countries such as the United States use 60HZ. Choose a suitable power frequency to avoid the screen flashing.
Anti-flicker
50Hz 60Hz
(3) White Balance
In the customize mode, you can click the “Auto” button to open or close the white balance auto adjustment function. When the auto button shows blue, the white balance of the image will be adjusted automatically. When the auto button shows grey, you can adjust the white balance according to your needs.
White Balance
Auto
(4) Restore Default Settings
After restoring default settings, all operating settings will be restored to the factory mode.
Settings
In this setting interface, you can change the language according to your need. Check your eMeetLink software version and update it.
- Set up
- Language selection
- Software update
- Software Version: 4.0.1
- Detect new version
- Software update notification
- Auto update
- Notification
- Allow popup
Support
1. Feedback
Write your feedback here to get EMEET customer service support.
Feedback FAQS User Manual Compatible device Contact
Question type:
Problem Description:
Device Name:
Submit Cancel
2. FAQs
There are some common questions for your reference.
Feedback FAQS User Manual Compatible device Contact
- The device is plugged into the USB port of the computer, but the device is not detected. Please unplug the device USB and re-plug the computer USB port.
- Computer (PC) software cannot be updated. Please check if the software has already been the latest version. You can also uninstall the software and download the latest eMeetLink software on the official EMEET website.
- After renaming the device, the updated device name is not displayed. Click [Save] and [Confirm] the device name.
- eMeetLink is unavailable. Please check if your device is connected to the computer via USB.
Still have questions?
3. User manual
Click the device to enter EMEET official website and get the user manual.
Feedback FAQS User Manual Compatible device Contact
Microphone Camera Headphone Accessory
4. Compatible device
Feedback FAQS User Manual Compatible device Contact
camera: Capsule, C950, C955, C960, C965, C970, C970L, C980 Pro, C990, Jupiter, Nova
Microphone: M2, M220, M2 Max, Luna, Luna Lite
Earphone: HS100
Accessory: eMute, A300, A200
5. Contact info
Feedback FAQS User Manual Compatible device Contact
Telephone:
+1 888 959 5320 Mon-Fri 9:00am - 5:00pm (EST)
+81 8008051955月-金10:00am - 6:00pm (JST)
400 8338 051 周———-周五9:00am - 5:00pm (BJT)
Official website: https://www.emeet.com
E-mail:
Support: support@emeet.com
Marketing: marketing@emeet.com
Sales: sales@emeet.com
