MClimate 16A Switch & Power Meter LoRaWAN®
User Manual
This document provides instructions for the MClimate 16A Switch & Power Meter LoRaWAN®. It covers technical specifications, safety, installation, commissioning, device operation, and placement guidelines.
What is in the box?
The package contains the MClimate 16A Switch & Power Meter LoRaWAN® device.
MClimate 16A Switch & Power Meter LoRaWAN®
Technical Specifications
Description: The MClimate 16A Switch & Power Meter LoRaWAN is a miniature device featuring a 16A relay and an electricity meter. It is designed to fit behind most wall switches and outlets. The device has 4 terminals (L, N, N, Lout) for connecting and disconnecting the load. It operates in LoRaWAN Class C, supports FUOTA (Firmware Upgrades Over The Air), and includes overheating protection.
Model: MC-LW-16ASPM-01
Dimensions: 32 x 36 x 18mm
Weight: 24.5gr
Enclosure: PC UL-94 VO
Frequency Range: 863÷870MHz (others available on demand)
LoRaWAN® Device Type: Class C End-device
Power Supply: 100-240VAC / 24-30VDC
Operating Temperature: 0°C to +40°C
Operating Humidity: 0-80% RH (non-condensing)
Environmental Conditions:
- Indoor use.
- Altitude up to 2000m.
- Ambient temperature: 0°C to +40°C.
- Maximum relative humidity of 80% for temperatures up to 31°C, decreasing linearly to 25% at 50°C.
- Environment with a degree of contamination 2 (PD2).
Storage and Transportation Conditions:
- Ambient temperature: -40°C to +85°C.
- Relative humidity: 5% to 90% without condensation.
Manufacturer
MClimate Jsc, 1784 Sofia, Sofia Tech Park, Labs Building, 111J Tsarigradsko Shose.
Compliance and Safety
WEEE Directive
The appliance marked with the recycling symbol [recycle] should not be disposed of with household waste. It must be handed over to a relevant collection point for electrical and electronic equipment recycling.
Safety Instructions ⚠️
Please read the safety instructions before installing the device. Failure to follow the recommended instructions may be dangerous or violate the law. MClimate Jsc. is not responsible for any loss or damage caused by failure to follow these instructions.
Legal Notices
All information, features, functionality, and specifications are subject to change without notice. MClimate reserves the right to review or update products, software, or documentation without prior notification. MClimate and the MClimate logo are trademarks of MClimate Jsc. Other brands and product names are trademarks of their respective owners.
EU Declaration of Conformity
This device complies with the essential requirements and other applicable provisions of the following EU directives:
- 2014/35/EU (LVD)
- EN62368-1:2020
- EN61010-1:2010
- 2014/53/EU (RED)
- EN300220-1
- EN300220-2
- 2014/30/EU (EMC)
- 2014/30/EU (EMC)
- EN301489-1
- EN301489-17
- EN55032:2015
- EN55035:2017
Compatibility
To operate the MClimate 16A Switch & Power Meter LoRaWAN®, a LoRaWAN® network is required.
CE mark present.
Device Parts, LED Status, and Button
Device Overview
The device features terminals for power input and output, a button for control, and an LED indicator.
LED Status
| State | Meaning |
|---|---|
| 2s ON, 1s OFF | Device is powering up. |
| 1s ON, 1s OFF | Device is trying to join the LoRaWAN Network. |
| Solid ON | Device has successfully joined the LoRaWAN network. |
| 1/4s ON, 1/4s OFF | Joining the LoRaWAN network has failed. |
| 2s OFF, 2s ON, 2s OFF | Alarm activated - overcurrent, overpower, overheating or overvoltage protection activated. The device shows joined/not joined status for 5s and continues indicating the alarm. |
Button Functions
| State | Meaning |
|---|---|
| 2 quick presses | Switch relay state. LED: 1s OFF, 1s ON, 1s OFF - relay closed. LED: 1/2s OFF, 1/2s ON, 1/2s OFF, 1/2s ON - relay opened. After relay status indication, LED continues to show the joined/not joined status. |
| 10s press | Restart the device, trigger new join-request, preserve the status of the relay. |
Commissioning
Step 1: Network Registration
Open your LoRaWAN® Network provider access panel and add the device using the supplied Serial Number, DevEUI, AppEUI (JoinEUI), and AppKey.
Note: The data shown in the interface is an example and should not be used directly.
Step 2: Continue Installation
Continue the installation following the instructions provided by your LoRaWAN® Network provider.
You can obtain DevEUI, AppEUI (JoinEUI), and AppKey information from the LoRaWAN® credentials .csv file provided with the fulfillment confirmation.
Wiring Diagram
Wire the device according to the diagram below. This is a view of the device from the side where the terminals are exposed.
The diagram shows connections for:
- Input Power: 100-240VAC / 24-30VDC, connected to L and N terminals.
- Output to Appliance: Connected to Lout and N terminals.
- Terminals labeled: L, N, N, Lout.
- The appliance is described as "(heater, light, etc.)".
Start-up Behavior
Once the device is wired and powered, it will start up and attempt to join the LoRaWAN network.
Placement Guidelines and Installation
⚠️ The device is intended for installation in console boxes, panels, or other enclosures providing an insulating shell of at least 5mm to cover current-carrying or conductive parts.
⚠️ The device must be mounted to non-conductive surfaces.
⚠️ Install the device in a location that ensures good cooling.
⚠️ Install vertically for improved cooling.
⚠️ Use the device only as a control device, not as a protection device.
LoRaWAN Resources | MClimate
MClimate | MClimate - We make any building smart
