Hibird DIY Smart Bird Camera & Solar Panel Combo Package - User Manual

1. Quick Start

Inside the Package (Camera)

The camera unit includes:

• Mic
• Motion Detection sensor
• Lens
• USB-C Port
• Power button
• Indicator Light
• Reset button
• 1/4" Nut for Mounting

Camera X1

Inside the Package (Solar Panel)

The solar panel unit includes:

• Solar Panel
• 1/4" Nut for Mounting
• Cable Trough
• DC Port (4.4x1.6mm)

Solar Panel X1

Inside the Package (Accessories)

• Metal Flexible Bracket X 2
• Hose Clamp X 4
• Thumb Screw X 2
• Washer X 2
• Screw X 6
• Anchor X 6
• Bracket Base X 2
• Locator Sticker X 2
• USB-C Cable X 1
• Solar Panel Cable X1

The above accessories are used for the camera and the solar panel installation and charging.

Get the Camera and Solar Panel Ready

1. Take Out the Camera: Take the camera out of the box and long press the Power button to turn it on. The status indicator light (green) will illuminate, indicating that the camera has started up normally. If it's the first time use, the indicator light will flash green, indicating that you need to configure the Wi-Fi network first.

Indicator Light Status

• Green light on: The camera is powered on and operating (The light turns off after 30 seconds for power saving but the camera remains operational).
• Green light flashing: The camera is in App configuration mode.
• Yellow light on: The camera is charging.
• Yellow light flashing: The camera is connected to a transfer device and has entered USB drive mode for data reading.
• Red light on: Camera error.
• Red-yellow-green flashing alternately: Firmware is updating. The camera will restart once the update is complete.

2. Using with App

Download Hibird App

Scan the QR codes to download the Hibird App from the App Store or Google Play.

• [App Store Download Link]
• [Google Play Download Link]

Add the Camera to Your Account

Click "Add Hibird DIY" on the App and follow the on-screen instructions to add your camera.

Configure Wi-Fi Network

You can configure the Wi-Fi network during the initial setup or later via "Camera -> Set -> Configure the Wi-Fi network".

The camera needs to be configured with a Wi-Fi network to function. You can configure the network now or add the camera first and configure it later.

Note: This camera supports 2.4G and 5G Wi-Fi. 5G Wi-Fi is recommended if the signal is good.

Set up the Camera

Through the App, you can view the camera's operating status, including battery power, signal strength, and storage space. You can also modify settings like camera name, video quality, and video length.

If you need to reconfigure or switch the Wi-Fi network, you can do it here.

3. Installation

Camera Mounting

Mount the camera anywhere using the Metal Flexible Bracket. Adjust its angle and tighten the thumbscrew to secure it. Use the Bracket Base and Hose Clamp to attach the bracket to a pole and point the camera at the bird feeding tray. This is one suggested mounting method; you can set it up as you prefer.

To install the bracket on a pole:

1. Insert the washer and thumbscrew into the bracket threads. Ensure the washer is placed in the middle for proper installation.
2. Adjust the camera to the desired direction, then tighten the thumbscrews to lock it in place and prevent movement.

Solar Panel Mounting

The installation steps for the solar panel are similar to the camera. Aim the solar panel towards sunlight and connect it to the camera using the charging cable for long-term battery life.

The bracket is adjustable. Fix the solar panel securely and point it in the direction of the sun.

Connect the camera to the solar panel using the included cable. Position the camera 4-12 inches from the bird feeder. Adjust the solar panel to face the sun for optimal charging. Ensure the camera is placed in an area with a stable Wi-Fi signal.

Wall or Tree Mounting

You can also mount the camera and solar panel by drilling holes into a wall or tree and securing the bracket base with screws. The location sticker included in the accessory package helps with accurate positioning.

1. Use the stickers to locate the drilling position and drill holes.
2. Insert anchors into the drilled holes.
3. Tighten with screws.
4. Install the bracket.

4. Discover Features

Quick Trigger to Capture Bird Moments

The sensitive and fast camera trigger (less than 0.5s) ensures you won't miss any visiting birds. You can clearly identify which birds are around your house.

Ultra-Clear 4K Video

The camera supports up to 4K video recording, clearly showing the details and colors of each bird for an excellent, high-quality viewing experience.

High-Definition 1080P Live-Streaming

Support 1080P live-streaming for high-definition, real-time video.

Accurate AI Bird Identification

Supports AI bird identification for over 10,000 species of birds with high accuracy, allowing you to identify birds by name.

Intelligent Chat-Style Bird Encyclopedia

Dr.Bird, an intelligent chat-style bird encyclopedia, allows you to ask questions about birds through conversations, helping you better understand them.

All-in-One Easy-to-Use App

The feature-rich and easy-to-use App allows you to check camera status, set up the camera, watch live-streaming, view images, and utilize AI functions, providing a new and exciting experience.

5. Product Scenarios

A Fun-Filled Birdwatching Journey with Unexpected Visitors to Your Yard or Balcony

Observe birds up close, identify visitors, and capture high-quality photos and videos. You might even witness unexpected guests like large birds or small mammals.

A Great Way to Get Kids to Love Nature

This camera is a wonderful tool for sparking children's interest in nature. They can observe various species of birds and other small animals, cultivating a deeper appreciation for wildlife and encouraging curiosity.

An Ideal Gift for the Holidays

This camera is a great choice for family and friends. It features a camera-sharing function that allows you to connect with others, share captured bird moments, and enjoy the experience together, strengthening relationships and creating shared memories.

6. Specification Form

Camera Specifications

Solar Panel Specifications

WARNING:

• Risk of fire or explosion if the battery is replaced with an incorrect type.
• Do not dispose of the battery in fire, hot ovens, or attempt to crush or cut the battery, as this can cause an explosion.
• Avoid exposing the battery to extremely high temperatures, which may result in an explosion or leakage of flammable liquid or gas.
• Do not subject the battery to extremely low air pressure, as this may cause an explosion or leakage of flammable liquid or gas.

7. Troubleshooting & FAQs

Pairing and adding camera problems

Before using the camera, please use the App to add it to your account. Follow the instructions in the App. If the device is already bound, contact customer support.

Wi-Fi network connecting problems

The camera must be connected to a Wi-Fi network within its coverage area to receive photos or videos. Configure the Wi-Fi during setup or later via Camera -> Set -> Configure the Wi-Fi network. If setup fails, double-click the Power button to enter "Network Configuration Mode" and try again.

How to change the Wi-Fi network for the camera

Double-click the Power button on the back of the camera to enter "Network Configuration Mode", then select the new Wi-Fi in the App under Settings -> Network.

The indicator light goes out after powering on

The camera indicator light (green) turns on and goes out after 5 minutes as a power-saving feature. The camera is functioning normally.

How to upgrade the camera firmware

1. Go to App -> Settings -> Device Information -> Firmware.
2. Click "Check Upgrade" to see if a new firmware version is available.
3. If available, update the firmware through the App. Ensure the camera has sufficient battery and storage space before upgrading.

How to set up the camera

Once the camera is turned on, go to App -> Settings to configure operating settings, image quality, and view device details.

The camera is triggered too frequently

1. Avoid pointing the camera directly at the sun, as heat can activate the PIR sensor.
2. Do not place the camera near swaying flowers, plants, or trees, as movement can trigger the camera.
3. Ensure the camera is placed on a stable surface.
4. Lower the "Detect Sensitivity" in the App settings to reduce sensor sensitivity and minimize false triggers.

The camera does not trigger shooting

1. Check if the camera is working by reviewing the last synchronization time in the App or testing live streaming.
2. Verify Wi-Fi network status. Poor Wi-Fi signals may prevent images from being sent.
3. Adjust "Detect Sensitivity" in the App settings (setting to 0 disables the trigger function).
4. Connect the camera to a computer via USB-C to check for local images. If images are present locally but not sent, connectivity needs to be resolved.

Can I replace the camera's SD card?

The camera's SD card cannot be replaced. It has built-in 32GB memory. Access stored data by connecting the camera to a computer using a USB-C cable.

AI recognition is inaccurate

AI recognition may fail if the bird's posture is poor, such as facing away from the camera or being partially obscured, leading to recognition errors.

How long can the battery last? Can I use solar panels?

Battery life depends on the number of triggers. To extend battery life, connect the camera to an external solar panel.

8. Warranty

Hibird DIY offers a one-year limited warranty against defects in materials and workmanship from the date of original purchase. Optional chargeable renewal policies for one, two, three, or four years are available. If a defect exists, Hibird DIY will, at its option, repair the product using new or refurbished parts or exchange it with a functionally equivalent new or refurbished product. The product must be returned with freight charges paid. This warranty excludes damage resulting from abuse, accidents, modifications, or other causes not related to material or workmanship defects, or repairs by unauthorized technicians. It covers failures due to defects in materials or workmanship under normal usage.

To obtain warranty service, contact Hibird DIY to determine the nature of the problem before returning the product. Provide a written description of the problem and print samples for repair or exchange.