User Manual for COOAU models including: D30 1080P FHD Built-in GPS Wi-Fi Dash Cam, D30, 1080P FHD Built-in GPS Wi-Fi Dash Cam, GPS Wi-Fi Dash Cam, Dash Cam, Cam
製品仕様書 – cooaujp
Scan "Cooau.com" QR code to contact us
Follow @Cooau.Official on Facebook
CONTENTS
FCC Statement.......................................................................01 1. Packing List........................................................................02 2. Important Notice .............................................................03 3. Camera Overview..............................................................05 4. Screen Overview ...............................................................07 5. Getting Started..................................................................10 6. Basic Operations ..............................................................14 7. Specifications ....................................................................30 8. Warranty & Support .........................................................31
'$$4UBUFNFOU This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
1.Packing List
COOAU D30 Dual Dash Cam
Car Charger
Suction Cup Mount
USB Cable
User Manual
Adhesive bracket
2. Important Notice
1. COOAU dash cam D30 adopts built-in super capacitor, which is only for emergency file back up and setting saving and has a longer service life than common battery. However, once the power supply is disconnected, the super capacitor won't provide constant power to support the normal operation of the camera. So, if you cut off the power, the camera will power off immediately, which is a normal situation. When you connect the cam to the power supply, the camera will automatically turn on and start recording.
2. The blue light is the power indicator and will remain on when the cam is turned on. The light will turn off when the camera is power off. The red light is the video indicator which will flash while the cam is recording and will turn off when video recording is paused.
3. If you turn on the camera for the first time or every time you restore the cam to default settings, it will jump directly into the settings, namely language setting, time setting and speed unit setting. If the micro SD card is not inserted, you will be reminded to insert a card. If the card is inserted, the cam will jump to an interface which prompt you to format the micro SD card.
4. Please format the Micro SD card to FAT32 in computer and then format it on dash cam before use; the Micro SD card should be formatted every 1-2 weeks to maintain good read/write performance.
5. The camera will automatically overwrite the locked files once the "emergency file" folder reaches 40% of the card capacity. Please regularly transfer important videos to your PC or other devices.
3.Camera Overview
1
3
4
52
9 11
7
8 10
6
NO.
Name
1
Front Camera Lens
2
Inside Camera Lens
3
Indicator
Description
Front camera for capturing the road ahead.
Inside camera for recording in-car situation.
Flashing red: recording; Steady blue:charging.
4
LCD Screen
1.5 inch LCD screen.
5
IR LED Lights
4 IR lights enhances the night vision in car.
6
Micro USB Charging Port USB port for charging or transferring files.
7
Mount Slot
Connects to the suction cup mount.
1. Long press it to power ON/OFF;
2. Under video mode:
(1)Recording: short press it to manually
lock files to reserve important videos
8
Power/Emergency/Menu/ during recording;
Back Button
(2)No recording: Short press it to go to
menu;
3. Under menu mode:short press it to
return to the previous menu.
Under video mode: short press it to
enter photo mode;
Under photo mode: short press it to
9
Photograph Mode/Up/ start photographing;
Delete Button
Under navigation menu: short press it to
select upward;
While viewing files: short press it to
delete files.
Under video/photo mode: short press it
to select different display options: Front
10
D i s p l a y O p t i o n / D ow n Camera, Inside Camera, PIP Front Full
Button
Screen, PIP Inside Full Screen;
Under navigation menu: short press it to
select downward.
Confirm option;
Under video mode:stop/start the video
11
OK/Pause/Play/Video Mode Button
recording; While viewing files: play/pause the video. Under photo mode: press it to go back
to video mode.
4. Screen Overview
4.1 Recording Mode
3FDPSEJOH 3FDPSEJOH5JNF 7JEFP3FTPMVUJPO -PPQ3FDPSEJOH*OUFSWBM .PUJPO%FUFDUJPO 8J'J Wifi is on
WiFi is off (14 Weak GPS Signal
Strong GPS Signal
No GPS Signal
(TFOTPS 1BSLJOH.PEF $VSSFOU%BUF5JNF &NFSHFODZ3FDPSEJOH 4OBQTIPU %JTQMBZ0QUJPO4XJUDIJOH 1BVTF3FDPSEJOH
4.2 No Recording Mode
00:09:33
3FNBJOJOHSFDPSEJOHUJNFPGUIFDBSE .FOV 3FDPSEJOH7JEFP
4.3 Menu Mode
Playlist Resolution /RRSc5HFRUGLQJ
#BDL 61
%08/ 0,
5. Getting Started
5.1. Insert a memory card
5.1.1 The precautions of SD card(Not included): 1. Class10, SDHC, TF card. 256GB max supported; 2. We suggest that you should chose TF card from famous brands, such as Samsung or Toshiba. We do not suggest Sandisk. 3. There are many fake cards in the current market. Every card has its limited times of writing and deleting. So if there is something wrong with the card after a long time use, it is quite normal. You just need to change to another new qualified card.
5.1.2 How to insert a Memory Card. 1. Please insert the micro SD card as the following picture shows. (Pay attention not to insert in a wrong way or the card will get stuck and break the cam.) 2. To remove the card, gently press inward its top edge with fingertip and it will jump out.
0LFURc6'
1
2
2. Clean the windshield using water or alcohol. 3. Wipe the suction cup until there is no dust on it. 4. Securely attach the suction mount to the windshield and rotate the locking clamp on the mount 90°upward until it clicks.
5.Carefully route the power cable around the windscreen and tuck it under the trim.
6. Connect the supplied car charger to the dashcam charging port.
7. Insert the car charger into your vehicle's cigarette lighter port.
8. Start the car. 9. The dash cam will auto power on and start recording.
6. Basic Operations
6.1 Instruction for Menu Setting Play List: Normal Video/Emergency File/Photo You can view the normal video, locked video and photo here. Please go to chapter 6.2 for detailed steps on how to view, play and delete files.
Resolution: Front camera/Inside camera (Default:1920x1080P) You are able to set the resolution of the front and inside cameras and the inside camera can be turned off separately.
*OTJEF
Loop Recording: 1 Minute/3 Minutes/5 Minutes (Default: 3 Minutes) While recording, the red LED indicator and a red dot on the top left of the screen will flash. The camera will overwrite the oldest file to save the current file automatically when the card reaches its capacity. You can set the time intervals as you like.
WiFi :On/Off (Default: Off) Wi-Fi name: COOAU-product series number; Wi-Fi Password: 12345678; This function is mainly used with the APP (Ficam). The steps to connect WiFi: 1. Turn on WiFi on the cam; 2. Enter the WLAN of your phone and find the Wi-Fi named
"COOAU-XXXX" ; 3. Connect it with the Wi-Fi password:12345678. The steps to download the App: Ficam and connect it to your cam: 1. Search "Ficam" on APP Store or Google Play and download it; 2. Turn on the app and click "Connect DVR" enter the app. 3. With the app connected with your cam, you can change settings, record videos, view, download and share videos and pictures to social medias. In addition, video files with GPS information can be played on the App. Note: 1. After connecting your cam to the App, you can only operate the cam on your phone. 2. For more information on how to use the App, please go to chapter 6.2.
GPS: On/Off (Default: On) 1. When the GPS signal is strong, the GPS icon appears in green. When the signal is weak, it is red while white indicates there is no signal. 2. GPS can record driving speed, latitude, longitude (coordinate) and driving route among which the speed, latitude and longitude (coordinate) are directly printed on the video as watermarking. The driving route can only be seen on our App: Ficam.
Display Option: Front Camera/Inside Camera/PIP Front Full Screen/PIP Inside Full Screen (Default: PIP Front Full Screen) 1. Front Camera - The image captured by the front cam will be displayed in full screen.
2. Inside Camera - The image captured by the inside cam will be displayed in the full screen.
3. PIP Front Full screen - The image captured by the inside cam will be displayed in the upper left of the corner, while the image captured by the front cam will be displayed in the full screen at the same time.
4. PIP Inside Full Screen - The image captured by the front cam will be displayed in the upper left of the corner, while the image captured by the inside cam will be displayed in the full screen at the same time.
G-Sensor: Off/Low/Medium/High (Default: off) 1. Once the G-sensor detects collision and vibration, it will lock the current video clips to the emergency files folder automatically. The locked files won't be overwritten by loop recording. So the important events will be saved and can be used as evidence. 2. The camera will overwrite the oldest event videos once the "emergency file" folder accumulates 40% of the card capacity. Please regularly transfer important videos to your PC or another storage location (e.g. external hard drive). To maintain good read/write performance, the micro SD card should be formatted every 1-2 weeks. 3. There are 3 levels of sensitivity: High, Medium, Low. We suggest you should choose medium because high sensitivity will lead to many unnecessary video clips saved as emergency file, thus affecting the normal recording.
Motion Detection: Front camera /Inside camera (Default: off) Once the motion detection detects any movements in front of the lens within 2.5 meters, the camera will record 1-minute video clip automatically and save it in the "Normal Video" folder. The dash cam will power off automatically if there is no movement within 5 minutes. Note: 1. In order to make this function work, you need to keep the cam in the state of power on. You'd better connect your cam to external power supply. 2. Please remember not to turn on motion detection when you drive or the loop recording will be affected.
Parking Mode: On/Off (Default: Off) 1. The parking mode will not be triggered when the camera is not connected to power supply. If you need to use the function, we suggest you hardwire your cam to car battery. 2. When the cam detects any collision or vibration, it will automatically turn on and record 30s locked video. If continuous movement (G-sensor, GPS speed, image change) is detected within 5 minutes, the camera will perform loop recording, otherwise it will power off automatically. Note: To use Parking Mode, you have to connect your cam to car battery by using a hardwire kit with a micro USB interface. The output current of the hardwire kit should be 5V/ 2.5A or 5V/ 2A.
Auto Power Off: On/Off. (Default: Off) 1. Only when you connect your cam to external power supply, this function works. Because if you use the cigarette lighter as the power supply(The cigarette lighter provides power when you start your car and loses power when the engine stalls.), the cam will immediately turn off when the engine stalls. 2. If you hardwire your cam to car battery, the dash cam will record normally about 5 minutes after parking; 3. If the G-sensor, GPS speed, image have no changes, and the car is stationary for 5 minutes, the camera will power off automatically.
Screen Saver: Off/30 Seconds/1 Minute (Default: Off). If you have no operation on the camera during the setting time, the screen will automatically go off. The LCD displays the time and the upper left corner displays the red dot . Screen saver will not affect the normal recording. You can press any button to return to recording interface.
Speed Unit: KM/H MPH (Default: KM/H) This is to set the speed unit of your car.
Sound Recording: On/Off. (Default: On) Note: The camera doesn't record audio if you turn it off for the purpose of protecting your privacy.
Volume Setting: 1. Button Beep: On/Off. (Default: On) Turn on/off the "beep" when you operate the camera. 2. System Volume: 100%/75%/50%/off (Default: 100%) System Volume includes the sound of video playback and camera boot. Just choose different levels of volume as you like. Note: When you turn it off, this does not affect the sound recorded by the camera itself.
Infrared Light: 0O0"VUP %FGBVMU0
The IR light is invisible in order not to affect driving safety. The IR light helps a lot during night recording. The images turns into white and black when Infrared LEDs is on. WDR: On/Off. (Default: Off) Suitable for situations like low light or backlight, WDR is able to restore the true colors of objects to the greatest extent. Fatigue Driving Alert: Off/1 Hour/2 Hours/4 Hours. (Default: Off) When the time interval you set finishes, there will be a sound reminding you to get some rest after a period of driving. You can set your own fatigue driving time according to your mental condition and traffic regulations. Language:&OHMJTI %FVUTDI'SBO¦BJT*UBMJBOP &TQB°PM %FGBVMU&OHMJTI
Frequency: 50Hz/60Hz. (Default: 60Hz) Please choose the proper one according to local situation. Note: the screen will appear horizontal stripes interference during the recording because of the wrong setting of frequency.
Time/Date: Press UP or DOWN button to select date and time values. Press OK to switch to next item. After all items are changed, press the OK button to save and exit. Note: All the time and date setting won't be saved if you press the back button to exit.
Car Plate Stamp: Preset 9-character positions, each with the optional letter a-z and the number 0-9. If you set your car license plate, they will be printed on videos as watermarking.
Format Reminder: On/Off. (Default: On) This function is to remind you to format the card regularly.
Deleting Reminder: On/Off. (Default: Off) The camera will overwrite the oldest locked video once the emergency file accumulates 40% of the card capacity. When the emergency file is over 30%, the camera will
remind you every 5 minutes. If you turn it off, the system will overwrite automatically. Prompt Content: Please delete locked files or save them to other device. Default Settings: If you press OK bottom, you will restore all settings to the factory state.
Format: If you press OK bottom, all the data will be deleted.
Version: You can view the software information. Card Information: You can view the storage Information.
EV Setting: +2.0,+1.7,+1.3,+1.0,+0.7,+0.3,+0.0,-0.3,-0.7,-1.0,-1.3,-1.7,2.0 When shooting the sky, water and other scenes, the image tends to be black, the image is discolored and easy to be distorted. How to solve this problem? Cause analysis: in a scene that has large contrast, the camera's auto exposure function will be affected and thus causing image color change. Solution: it can be corrected by adjusting the EV Setting. Higher value means brighter image. Mirror Image Correction: On/Off (Default: Off) Turn this function on and the image of the inside camera will become normal in the screen.
6.2 Viewing Video/Photos 6.2.1 Viewing Video/Photos on the Camera Go to "Play list", press OK and UP/DOWN button to navigate to "Normal Video" or "Emergency File" or "Photo" to view and playback videos or photos on camera. Use the UP/DOWN buttons to select the file and press "play"button to playback/pause.
#BDL %FMFUF %PXO 1MBZ
6.2.2 Viewing Video/Photos on the APP (Ficam) If you want to view all files on the APP (Ficam), please follow the steps as below. 1. Click "Connect DVR" 2. Click "Enter DVR" 3. Click " " 4. You can view the videos and photos on your phone. There are "Loop","Event" and "Photo" to choose.
6.3 Delete Video/Photos 6.3.1 Delete Video/Photos on the Camera Go to Normal file/Emergency file/Photo, playback the video on the dash cam, press delete button and choose "Yes".
6.3.2 Delete Video/Photos on the APP (Ficam) If you want to delete files on the APP (Ficam), please click the "delete" button, then click "OK".
7. Specifications
Model Display Languages
Video Resolution Image Audio Memory Storage USB Port Working Temperature
COOAU D30 1.5 inch LCD screen
&OHMJTI %FVUTDI'SBO¦BJT*UBMJBOP &TQB°PM %FGBVMU&OHMJTI
Front Camera: 1080P/720P Inside Camera:1080P/720P/Off
JPEG format; Built-in microphone and speaker External: MicroSD Card (32 to 128GB Card in FAT32, Class 10)
Micro USB -4° to 158°F (-20° to 70°C)
64#
1
7 6
3
4
2 5
9 11
8 10
12
/0
-$%
5'5-$%
*3-&%
*3-&%
.JDSP64#
0,
NJDSP4%
NJDSP4%
')% 8*'* (14
.JDSP4%
(# NJDSP4% (#(#(# NJDSP4%
NJDSP4% NJDSP4% NJDSP4% NJDSP4%
NJDSP4% (# NJDSP4%
0LFURc6'
NJDSP4% 0'' NJDSP4% 0/ NJDSP4% NJDSP4% 0'' NJDJSP4%
64#
64# 64# 64# 64#
o
64# 64#
(4FOTPS
1 1 11 11
NJDSP4%
8J'J "114UPSF (PPHMF1MBZ 'JDBN 8J'J (1471/ JOUFSOFU 8J'J 8J'J44*%$00"6YYYY$00"6 YYYY :PVUVCF'BDFCPPL-JOF 4/4
,.I
(14 (14
(14 (14 (14 (14 "11'JDBN
(14
(14 (14 (14 65$(.5
(14 (14 (14 TVQQPSU!DPPBVDPN
( (4&/403 (TFOTPS 4 (4&/403 (14 (14
(
"$$
"$$ (TFOTPS (14
,.).1),.) ,.)
8%3 8%3 8%3
&OHMJTI %FVUTDI'SBO¦BJT*UBMJBOP&TQB°PM
)[ )[)[
NJDSP4%
D30 JP V1.5
4%
&7 &7&3
3.28. 0/
64# 04
$00"6% 5'5-$%
'
&OHMJTI *UBMJBOP'SBO¦BJT %FVUTDI &TQB°PM
1 GQT
11 GQT
11 GQT
+1&( .*$
4%)$ $MBTT (# (# '"5
NJDSP4%5'
.JDSP64#
8JOEPXT 917JTUB8JOEPXT 8JOEPXT 8JOEPXT.BD04
.*$30
.*$304% 4%
.*$30 4%
.*$304%
)[
)[
.*$304% .*$304%
(14 (14
'JDBN
8J'J
(14
8J'J 8J'J 8*'*
Adobe Illustrator 24.0 (Windows) Adobe PDF Library 15.0