Instruction Manual

Table of Contents

• Product and accessories
• Start to use
• Hardware installation
• Mobile phone App installation and use
• Camera installation
• Wi-Fi network settings
• P2P mode
• FAQ

Product and Accessories

1. Camera
2. Power adapter
3. Mounting bracket
4. Quick start guide
5. Disc

Start to Use

Hardware Installation

Connect to camera AP.

Add camera.

Get real-time video, point-to-point usage. Configure camera WIFI.

Mobile Phone App Installation and Use

1. Download and install HDWifiCamPro from the Apple Store for iOS, and search on Google Play for Android. For easy installation, please scan the QR code to download and install HDWifiCamPro. If your device fails to connect to GooglePlay, please scan the APK QR code for download and installation. Note: It is recommended to use the QR code scanning software that comes with your browser or a third-party to scan and download the App. Direct download and installation of App files is not supported by WeChat scan.
2. Click "+" to add a camera. Click and add the connected camera, enter the page for adding the camera, fill in the UID or password to add the camera. Note: when using the camera for the first time, please refer to "set up the camera to connect to the WIFI network" section on the instruction to set up the camera to connect to your router before adding the camera.

Camera Setting

1. Click the gear button at the back to open the advanced configuration page of the camera.

Product Name: HDWiFiCam Pro

Model: DGK000006HFMCB

Connect to Router

Configure camera WIFI.

App Download Options:

• Install from Google Play
• iPhone/iPad AppStore
• Directly download Android Apk installation

Connect the Camera to the Wi-Fi Wireless Network

For a new camera or a camera installed in a new location, please reset the camera to default settings (press and hold the camera reset button for more than 5 seconds after the camera starts), and turn on AP mode after the camera restarts. The WIFI indicator light flashes slowly (once every 3 seconds). Then, turn on phone settings, connect the phone to the camera's AP hotspot (the WIFI network is named after the camera UID), and wait for the phone to switch to the camera's WIFI network before starting the App.

1. Connect the phone to the camera's AP hotspot (the WIFI network is named after the camera UID), and wait for the phone to switch to the camera's WIFI network before starting the App.
2. Select to add camera "+" in the App.
3. Select to connect the camera to the WIFI network.
4. SD card video recording setting: Set the mode and the screen size of SD card video recording.

SD Card Settings:

• SD card total capacity: 29493M
• SD card available space: [Not Specified]
• Record length (minute): 10

2. Modify the WIFI connection. Select WIFI Settings and the camera will show the available Wi-Fi hotspots. Select your Wi-Fi network name (SSID), enter the Wi-Fi password, and press the finish key to connect. Note: After saving, if the camera is connected to WIFI, it will disconnect the current connection to try a new WIFI network, which will cause the camera in the App to be temporarily offline for about 1 minute.

5. Then click the camera configuration page and click Wi-Fi Settings, select the router hotspot to be configured and enter the correct WIFI password, waiting for the camera to get online.

Troubleshooting Network Connection:

• A. Camera indicator light does not flash slowly and AP is not turned on before you start configuring Wifi.
• B. If the phone fails to connect to the camera AP, you need to configure the phone to connect to the AP hotspot of the camera.
• C. Supports ordinary routers. However, public routers requiring login page authentication are not supported.
• D. Make sure there are no errors in the network name, network password, and UID when configuring.
• E. Wifi names and passwords in Chinese are not supported at this moment.
• F. 5G Wifi signal is not supported.
• G. Check whether the Wifi indicator light is always on; if yes, it means the camera networking is successful. Please add an online camera directly; the App may not detect a successful camera configuration due to network shielding.
• H. If WiFi is WEP encryption mode, change to WPA mode.

Add Camera

You have a new device that needs to be connected to your home for WiFi use, or you need to reconnect to it. Please select this.

Connection Methods:

• Add online camera
• Add new camera

3. There are two ways to quickly enter the camera UID: A. Scan the QR code on the camera; B. Search the camera through the local network.

4. Fill in the camera name and the P2P password. The default P2P password is 6666. Confirm and click Ok. Camera is added successfully. It is recommended to modify the P2P access password after setting up the camera.

5. After the camera is showed online, then click the camera you just added to watch the real-time video. You can control the device in the video interface.

P2P Mode Viewing

You can view videos directly and operate on the camera without a Wifi router.

1. Reset the camera and wait for the camera to restart and turn on AP mode.
2. After the camera is started, you can find the same Wifi network as the camera UID on the Wifi setting page of the phone, without encryption.
3. Connect your phone to the Wifi network and wait for the icon of successful Wifi signal connection.
4. Same as router mode, add an online camera directly and you can turn it on for normal use. If you have already added a camera, then you can connect directly.
5. After the connection is successful, open and view the videos.

Camera Platform Control and Features

Camera platform control: By PAN/TILT with your fingers on the video page, you can control the rotation of the camera platform, which depends on the sliding distance of your finger (need to purchase camera for support).

Two-way voice intercom: Users can hear the camera sound and have two-way voice intercom (need to purchase camera for support).

Video Recording: Take snapshots and record video files.

Image Flip: Flip images vertically and horizontally.

Brightness and Contrast: Adjust brightness and contrast, tune intercom sound.

Playback: Watch videos in the SD card.

Other features of the page:

• Watch the current real-time video.
• View screenshots taken by the camera.
• View video files for your mobile device.
• View camera alarm event record.

FAQ

1. Why is the image blurred?
   A: Remove the protective film of the lens. If it is still not clear, rotate the camera lens and focus it so that you can get a clear image after focusing.
2. Why the search tool is unable to detect the camera?
   A: Please make sure if the network connection is good, turn off the firewall and security software, and make sure the camera is connected to the router.
3. Why does the camera always require a user name and password, or an incorrect user?
   A: The default password for the camera is 6666. If you forget your user name or password, you can resume the camera to the default settings to get the default user name and password.
4. How can I resume my camera to default settings?
   A: Please press the reset button on the camera for about 5 seconds until the camera restarts.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.