How do I pair my Jabra Eclipse with my mobile device?

To pair your Jabra Eclipse with your smartphone, tablet, or other mobile device, follow these steps.

1. Turn on the Bluetooth setting on your mobile device.
2. Place your Jabra Eclipse in the charging case, and make sure it is charged.
3. To enter pairing mode, press and hold (3 seconds) the Jabra button on the bottom of the charging case until the light flashes blue.
4. Remove your Jabra Eclipse from the charging case.
5. To pair, go to the Bluetooth menu on your mobile device and select the Jabra Eclipse from the list of available devices. Enter "0000" (four zeros) if you are asked for a pin code.

Illustration showing a hand holding a Jabra Eclipse earbud and placing it into its charging case. The earbud has a small indicator light, and the case has a charging port.

Illustration showing a hand holding the Jabra Eclipse charging case. A finger is pressing the button on the bottom of the case, and the indicator light is flashing blue.

If pairing is not successful, try the pairing steps again, or try pairing with a different Bluetooth device. For troubleshooting tips, see here.

Optionally, try using the Bluetooth Pairing Guide which provides detailed steps for pairing with a mobile device.

For more support, visit: Jabra Eclipse Support Page