How do I pair my Jabra Style with my mobile device?
To pair your Jabra Style with your smartphone, tablet, or other mobile device, follow these steps.
- Turn on Bluetooth on your mobile device.
- To enter pairing mode, slide and hold (3 seconds) the On/off/pairing switch to the Bluetooth position until the Bluetooth LED flashes blue, and then release the switch.
Illustration shows a Jabra Style headset. A green arrow points to the side of the headset where the on/off/pairing switch is located, indicating it should be slid to the Bluetooth position. A blue flashing light symbol is shown near the switch.
- To pair, go to the Bluetooth menu on your mobile device and select the Jabra Style from the list of available devices. Enter "0000" (four zeros) if you are asked for a pin code.
Note
If pairing is not successful, try the pairing steps again, or try pairing with a different Bluetooth device. For troubleshooting tips, see here.
Optionally, try using the Bluetooth Pairing Guide which provides detailed steps for pairing with a mobile device.