Edifier W220T True Wireless Earbuds Headphones

Notice

NOTICE: Information contained herein may be subject to change without prior notice for technical improvement and system upgrade. Pictures and illustrations may differ slightly from the actual product; the actual product prevails in case of any difference.

Power ON/OFF

Power ON: The earbuds automatically power on when the charging case is opened.

Power OFF: The earbuds automatically power off when placed in the charging case and the case is closed.

Note: If there is no Bluetooth connection for 10 minutes after power on, the earbuds will turn off automatically.

Pairing

Initial Pairing

1. Place both earbuds in the charging case and keep the case open.

2. Press and hold the button on the charging case for approximately 3 seconds. The white and green LEDs on the case will blink alternately, indicating pairing mode.

3. On your device, select "EDIFIER W220T" from the Bluetooth settings to connect. The white LED on the case will blink once and then turn off upon successful connection.

Note: For subsequent use, the earbuds will automatically connect to the last connected device.

Reset

1. Place both earbuds in the charging case and keep the case open.

2. Press the button on the charging case 3 times. This action re-enters left & right earbud connection and clears all previous pairing records. The white LED on the case will blink slowly.

3. Select "EDIFIER W220T" in your device's Bluetooth settings to connect. The white and green LEDs will blink alternately, and the white LED will blink once and turn off when successfully connected.

Dual Connectivity

1. Pair device A with the earbuds. Once connected, place the earbuds back into the charging case, keep the case open, and press and hold the button on the case for approximately 3 seconds to re-enter pairing mode.

2. On device B, search for and connect to "EDIFIER W220T".

3. On device A, manually select "EDIFIER W220T" to connect. The white LED will blink once and then turn off upon successful connection, indicating that dual connectivity is established.

Charging

Charging the Case: Connect the charging case to a power source using the included Type-C charging cable.

The orange LED on the case will be steadily lit while charging and will turn off when fully charged.

Note: Do not charge the earbuds if there is sweat or other liquids inside the charging port, as this may damage the earbuds.

Input Specifications:

• Earbuds: 5V 200mA
• Charging Case: 5V 1A

Controls

Easily pinch the debossed area on the stem of each earbud to perform various functions:

• [Single Pinch]: Play/Pause music, Answer/End call.
• [Double Pinch]: Next track (Right earbud), Previous track (Left earbud).
• [Triple Pinch]: Activate Voice Assistant (e.g., Siri, Google Assistant).
• [Press and Hold for 2 seconds]: Reject incoming call or switch audio to/from phone during a call.

Note: Images in this manual are for illustrative purposes only and may differ from the actual product.

Edifier Connect App

Download the Edifier Connect App to access more customizable control settings, update firmware, and personalize your listening experience.

Scan the QR code or search for "Edifier Connect" on the App Store (iOS) or Google Play Store (Android) to download the app.

Regulatory Information

FCC Compliance

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Compliance: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

ISED Regulatory Compliance (Canada)

This device contains licence-exempt transmitters that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

FCC ID: Z9G-EDF184

IC: 10004A-EDF184

EU Declaration of Conformity

Hereby, Edifier International Limited declares that the radio equipment type EDF200089 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://www.edifier.com/int/eu-doc.html

Frequency Band: 2400MHz - 2483.5MHz

RF Power Output: ≤** dBm (EIRP)

There is no restriction of use.

Hazardous Substances Table

Notes:

1. "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value.

2. "○" indicates that the percentage content of the restricted substance does not exceed the reference percentage value.

3. "−" indicates that the restricted substance corresponds to an exemption.

Technology

Snapdragon Sound is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Snapdragon and Snapdragon Sound are trademarks or registered trademarks of Qualcomm Incorporated.