ROLINE Ultra-Slim Under Desk Storage Drawer
Model: 17.03.0114
Dimensions: 410mm (width) x 272-470mm (depth) x 50.8mm (height)
Weight Capacity: 8 kg (17.6 lbs)
[Recyclable Material]
Installation Guide
This guide provides instructions for installing the ROLINE Ultra-Slim Under Desk Storage Drawer.
Parts Included
- Part A: Storage Drawer Unit (x1)
- Part B: Screws (ST4.8x16) (x4)
Installation Steps
-
Step 1: Prepare the Drawer Unit
Take the storage drawer unit (Part A).
Visual shows the storage drawer unit. An arrow indicates the direction of attachment or movement.
-
Step 2: Mark and Drill Pilot Holes
Position the drawer unit under the desk at the desired location. Mark the screw hole positions on the underside of the desk. Drill pilot holes using a 3mm (1/8 inch) drill bit. Ensure the holes are approximately 16mm (0.6 inches) deep.
Illustrations show marking points on a desk underside, drilling pilot holes (Ø 3mm / Ø 1/8"), with a depth measurement of 16mm (0.6 inches).
-
Step 3: Attach the Drawer
Align the drawer unit with the pilot holes. Secure the drawer unit to the desk using the provided screws (Part B).
Diagram shows the storage drawer unit being attached to the desk underside with screws (labeled 'B').