Motorola Solutions MXP660 TETRA Handheld Radio

MXP660: TETRA Handheld Radio with Multiple Carriers

Security in operation, today and in the future.

The MXP660 is a robust, lightweight, and fully functional TETRA handheld radio with integrated LTE, designed for ease of use. To ensure that no important messages are lost, the TETRA transmission power of the MXP660 can be increased to Class 3. If an MXP660 user is outside of TETRA coverage, the radio can automatically switch to available LTE or WLAN broadband, while DIMETRA™ functions and workflows remain available via DIMETRA Connect.

The clarity of voice communication also plays a crucial role. Thanks to integrated AI-powered technology for suppressing loud background noise, the MXP660 ensures better intelligibility during voice transmission, enabling your first responders to communicate clearly and effectively.

The MXP660 also helps you reduce your total cost of ownership by optimizing costly and time-consuming administrative routines with LTE and WLAN over-the-air updates. Technologies such as Bluetooth® 5.3 and Near Field Communication (NFC) enable comprehensive and secure collaboration with smartphones, tablets, and other Bluetooth devices such as bodycams and audio accessories. The MXP660 protects your existing investments, as most accessories from the MXP600, including chargers, batteries, and audio accessories, are also compatible with the MXP660.

The device is designed to adapt to sudden changes in the field as well as future technological changes, enabling your first responders to work effectively and efficiently.

Key Features

• Stay connected with integrated LTE and WLAN
• Compatible with DIMETRA Connect to stay connected even outside of TETRA coverage
• TETRA handheld radio for mission-critical communication
• AI-powered noise suppression
• Class 3 transmission
• Robust and secure
• Low Total Cost of Ownership
• Optimize radio updates: Over-the-Air Updates (OTA-Updates) and Over-the-Air Programming (OTAP) via LTE in the field, anytime and anywhere
• Compatible with most MXP600 accessories
• Future-proof features protect your investment
• Bluetooth 5.3 and NFC
• M-Radio Control App for your smartphone or tablet
• Compact and user-friendly
• T-Grip
• Lightweight

General Technical Specifications

Dimensions

• Height: 126 mm
• Width: 54 mm (64 mm with T-Grip on top)
• Depth: 25 mm (with IMPRES2 battery 1,900 mAh), 30 mm (with IMPRES2 battery 2,900 mAh or 3,400 mAh)

Weight

• 213 g (with 1,900 mAh battery, without antenna)
• 225 g (with 1,900 mAh battery and 60 mm antenna)

Battery Options

• IMPRES2 battery with 1,900 mAh
• IMPRES2 battery with 2,900 mAh
• IMPRES2 battery with 3,400 mAh

User Interface

• Display: Transflective 2.4-inch display with 65,000 colors, easy-to-read modern user interface, backlight option, screen rotation option, text size scaling option, customizable screensaver image, world time display, configurable timeout timer, multiple individually configurable display languages.
• Controls: Backlit keypad, dual-function rotary knob, 3 programmable side buttons, configurable one-touch keyboard (10 programmable digit keys).
• Sensors: Accelerometer, ambient light.
• Group Management: User-friendly, flexible, fast, and efficient user interface. Folder structure with two levels (folders/subfolders). TMO folders: up to 500, TMO groups: up to 10,000. DMO folders: up to 128, DMO groups: up to 2,000.
• Group Favorites: 4,000 TMO entries (up to 2,048 entries in one folder). Up to 3.
• Scan Lists: 40 lists with up to 20 groups.
• Country/Network Code List: Up to 100.
• Menu: Customizable menu list to meet each user's requirements. Menu shortcuts are available.
• Contact Management: Quick search to easily find contacts.
• Contacts: Up to 1,000 contacts with 6 numbers per contact (max. 2,000 individual numbers).
• Dialing Methods: One-touch buttons, from favorite folders, from the address book, from the list of recent calls, direct dialing, embedded in short messages, via speed dial, via group call by index.
• Ringtones: Vibration alarm and multiple ringtones.
• Message Management: Unique folders for each message type for flexible message management.
• Text Entry: 400 predefined messages, assignable to one-touch buttons.
• Stealth Mode: Switches the device to stealth mode for covert operations.
• Safety: Fall alarm.

Audio

• Audio Output at Nominal Value: 2 W
• Audio Distortion at Nominal Value: <1%
• Maximum Audio Output: 2.2 W
• Maximum Volume: 99 Phon (standard profile), 102 Phon (loud profile)
• Noise Suppression: AI-powered noise suppression (high and low suppression options).
• Acoustic Feedback Rejection: The AI-powered noise suppression also provides acoustic feedback rejection.
• Echo Cancellation: The AI noise suppression also significantly improves echo cancellation.
• Number of Microphones: 2 microphones (front top and front bottom).
• HD Voice: Hardware-enabled (8 kHz bandwidth).

Connectivity

• LTE: LTE Bands B1, B2, B3, B4, B7, B8, B20, B28, B38, B40, B41.
• Antenna: Integrated antenna.
• SIM Card: Nano-SIM.
• Security: 3GPP TS 33.401.
• WLAN: IEEE standards 802.11 a, b, g, n, ac.
• WLAN Bands: 2.4 GHz and 5 GHz.
• Authentication and Encryption: WPA, WPA2, WPA2 Enterprise (EAP-TLS), WPA3, WPA3 Enterprise.

Bluetooth

• Supported Bluetooth Versions: Bluetooth 5.3, 5.2, 5.1, 5.0, 4.2, 4.1, 4.0 and 2.1 + EDR.
• Bluetooth Power: Class 2.
• Bluetooth Range: Line of sight is 10 m.
• Bluetooth Security: With secure connections (Security Mode 4, Level 4 according to NIST recommendation). Supports the AES algorithm (Advanced Encryption Standard) with a 128-bit key length. Also uses an algorithm for Bluetooth key generation and key authentication.
• Bluetooth Audio Profiles: Headset Profile (HSP), Serial Port Profile (SPP), Generic Access Profile, Generic Attributes Profile (GATT), including Heart Rate Profile, Battery Service Profile, Device Information Profile.

NFC

• Tag Type: ISO/IEC 15693.

RFID

• Tag Type: 866-868 MHz or 902-928 MHz.

TETRA Antenna

• Connector: SMA.
• Impedance: 50 Ω.
• Accessory Package for Text Input: N/A.
• Auto Text Recognition: Auto.

TETRA Services

HF

• Frequency Bands: 350 to 470 MHz.
• Transmit Power: Class 3 (2.8 W), Class 3L (1.8 W), Class 4 (1 W).
• Adaptive RF Power Control: According to EN 300 392-2.
• Receiver Class: A and B.
• Static Sensitivity of the Receiver: -116 dBm (guaranteed), -118 dBm (typical).
• Dynamic Sensitivity of the Receiver: -107 dBm (guaranteed), -109 dBm (typical).

Security

• Authentication for Air Interface Encryption: Initiated by infrastructure and completed by the terminal.
• Algorithms for Air Interface Encryption: TEA 1, TEA 2, TEA 3 (hardware-enabled for TEA 5, TEA 6, TEA 7 and dual encryption).
• Security Classes for Air Interface Encryption Protocols: Class 1 (unencrypted), Class 2 (SCK, OTAR-SCK), Class 3 (DCK/CCK, OTAR-CCK, OTAR-SCK), Class 3G (GCK, OTAR-GCK).
• End-to-End Encryption (E2EE): AES 128 or AES 256 for voice and short data with support for OTAK via optional hardware security module (HSM).
• User Access Control: PIN/PUK code access.
• Security for Air Interface Encryption Protocols: The authentication of radio user assignment/radio user ID (RUA/RUI) restricts radio users to pre-installed service profile functions.
• End-to-End Encryption (E2EE): RUA/RUI are not supported when E2EE is activated.
• Integrated Firewall: Protects incoming IP traffic by restricting it to the channel initiated by the MXP660. No open TCP/UDP sockets.
• Other Security Features: Temporary deactivation (Stun), permanent deactivation² (ETSI standard), packet data user authentication.

Data

• Short Data: Status: 400 entries, send via one-touch button or menu. TMO and DMO.
• SDS: Concatenation up to 1,000 characters. TMO and DMO. Callout (simple, full, E2EE). Access to SDS during an emergency call. Target address: sent to individual or group address (selected or dedicated). Short messages can be sent and received during a call.
• Packet Data: Multi-slot packet data: data transmission with up to 4 traffic channels, supporting a total of up to 28.8 kBit/s.
• Additional Equipment Interface (PEI): TNP1: simultaneous operation of packet data and short data services via a common additional equipment interface (PEI). AT commands: complete ETSI functionality and extended commands. AT multiplexer: 4 virtual physical ports (simultaneous PD, SDS, AT commands, and Air Tracer sessions).
• Expandable Storage: Up to 32 GB with a microSD or microSDHC card.

TETRA Services (Continued)

Language

• Full Duplex: TMO: private, PABX, PSTN, emergency call.
• Half Duplex: TMO: private, group, emergency call. DMO: private, group, emergency call.
• Tactical: Group call to associated group.
• Non-Tactical: Group call to special group.
• Individual: Emergency call to preset party (half/full duplex).
• Hot Mic: Allows speaking without pressing the PTT button.
• Intelligent Emergency Call: Automatic switching from TMO to DMO and from DMO to TMO.
• Emergency Call Function: Emergency call status message sent to the dispatch console. Location: Location (GNSS) is sent during an emergency call. Target address: sent to individual or group address (selected or dedicated). Status message: emergency call status (or other predefined status).
• Inter-MNI: Call via gateway, call via repeater.
• Double Press of PTT Button: Priority call with priority.
• Phonebook: 1,000 people, 6 numbers per person, maximum 2,000 entries.
• Scanning: 40 lists with 20 groups, monitoring 20 groups simultaneously (selected group and passive monitoring).
• Announcement Group: 1 primary group that can monitor other groups.
• DGNA: Up to 10,000 groups.
• DMO Repeater Mode: ETSI-1A DMO repeater for channel-efficient operation. Amplifies voice and tone signals in the selected group. Amplifies SDS and status messages in the selected group. Beep signal when repeater is available. Emergency call (priority call with priority). Monitoring of calls and participation in calls in repeater mode.

DIMETRA Connect (TETRA over IP)

• Supported Networks: Supports DIMETRA Connect 3 via LTE and WLAN.
• DIMETRA Connect Security: Certificate-based authentication between radio and DIMETRA Connect gateway. 256-bit AES encryption over IP between radio and DIMETRA Connect gateway. Manages TETRA authentication, TETRA end-to-end encryption, temporary/permanent TETRA deactivation via LTE and WLAN. TLS 1.3 for DIMETRA Connect over WLAN and LTE.

Device Management Solutions

• Customer Programming Software (CPS): Supports CPS version 8.3 and higher.
• Integrated Terminal Management (iTM): Supports iTM version 8.3 and higher.
• Over-The-Air Updates/Programming: LTE: Supports OTA updates/programming for firmware and configuration (codeplug) via LTE. WLAN: Supports OTA updates/programming for firmware and configuration (codeplug) via WLAN. TETRA: Supports OTA programming for selected configuration information (codeplug) via the TETRA network.
• OTAP Security: TLS 1.2 for OTAP via LTE and WLAN.

Location Services

Satellite/Outdoor Navigation Service

• Supported Constellations: GPS plus one of the following options: Galileo, GLONASS or BeiDou, SBAS (Satellite-Based Augmentation Systems) including QZSS.
• GNSS Antenna: Integrated antenna.
• GNSS Sensitivity: GPS: -163 dBm (guaranteed); GLONASS: -157 dBm (guaranteed); Galileo: -164 dBm (guaranteed); BDS (BeiDou): -155 dBm (guaranteed).
• Tracking Sensitivity: GPS: -157 dBm (typical); GLONASS: -160 dBm (typical); Galileo: -156 dBm (typical); BDS (BeiDou): -155 dBm (typical).
• Horizontal Accuracy, 2D: 1.0 m (95% probability, -130 dBm, > 15 SVs Galileo and GPS).
• TTFF Cold Start: < 60 s (95% probability at -130 dBm).
• Protocols: ETSI-LIP (short and long), LRRP from Motorola Solutions.

Indoor Navigation Service

• BTLE Indoor Area: iBeacon™/Bluetooth Low Energy Beacon.
• Protocols: ETSI LIP (extended).

Recommended Services

3 years of Essential Software Services are included as standard. Additional services are available. Visit motorolasolutions.com/mxp660 for more information.

Environmental Specifications

• Operating Temperature: -30 °C to +70 °C.
• Storage Temperature: -40 °C to +85 °C.
• Humidity: (condensing and high).
• Temperature Change, Low and High Temperature: ETSI 300 019-1-7 Class 7.3E.
• Shock (Vibration and Irregularities), Drop (Free Fall, Drop, Tip-over) and Vibration Resistance (Noise and Sine): ETSI 300-019 1-7 Class 5M3.
• Protection Against Dust and Water Ingress: IP68 (2 m, 2 h), IP67, IP66, IP65 according to IEC 60529.
• Laboratory Accreditation: ISO/IEC 17025:2017.

US Military Standard Matrix

Note: Some of the listed functions are optional and some require additional software licenses. Please contact your local Motorola Solutions sales representative for details.

1 Recommended for low-temperature environments.

2 Two options: customer-recoverable or Motorola Solutions-recoverable only.

3 For more information on DIMETRA Connect, visit: motorolasolutions.com/dimetraconnect

4 iTM software (Integrated Terminal Management) required.

5 Performance may be limited at extreme temperatures.

For more information, visit: motorolasolutions.com/MXP660

Motorola Solutions Germany GmbH, Serviceware-Kreisel 1, 65510 Idstein, Germany. motorolasolutions.com

All specifications are subject to change without prior notice.

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. ©2025 Motorola Solutions, Inc. All rights reserved.