VINTERFINT Christmas Tree Stand Assembly
Product Information
This document provides assembly instructions for the IKEA VINTERFINT Christmas tree stand.
Brand: IKEA
Product Name: VINTERFINT
Product Code: 206.240.02
Product Type: Christmas Tree Stand
Parts Included
- 4x Snowflake-shaped base pieces
- 4x Eye bolts (part 128425)
- 5x Round felt pads (part 109142)
- 4x Nuts
Assembly Steps
Step 1: Attach Base
Attach the four snowflake-shaped base pieces to the central cylinder. Use the four screws (part 128425) and four nuts provided. Tighten securely.
The diagram shows the four snowflake-shaped base pieces being connected to the bottom of the main cylindrical part. Screws (labeled 128425) pass through holes in the base pieces and into the cylinder, secured by nuts from the inside.
Step 2: Apply Floor Protectors
Apply the five round felt pads (part 109142) to the underside of the assembled base. These pads help protect your floor from scratches.
The diagram illustrates placing five round, flat pads onto the bottom surface of the snowflake-shaped base pieces.
Step 3: Insert Securing Bolts
Insert the four eye bolts into the holes located at the top rim of the central cylinder.
The diagram shows four eye bolts being screwed into the top edge of the central cylinder.
Step 4: Secure Tree Trunk
Tighten the four eye bolts by turning them clockwise. These bolts are used to secure the trunk of your Christmas tree within the stand.
The diagram shows the four eye bolts, now inserted, being tightened by hand.
