Inateck KB05111 Bluetooth Keyboard

1. Power ON/OFF

Power ON: Toggle the switch to ON.

Power OFF: Toggle the switch to OFF.

2. Pair KB05111 with a Surface Pro

1. Step 1: For the first time you pair KB05111 with a Surface Pro, toggle the switch on the KB05111 to "ON". The keyboard will enter Bluetooth pairing mode automatically. Alternatively, hold the Fn + Esc keys simultaneously for 3 seconds; the blue indicator will flash to show it's in pairing mode.
2. Step 2: On the Surface Pro, navigate to All Settings - Devices - Add Bluetooth or Other Device - Bluetooth. "Inateck KB05111" will appear as an available device.
3. Step 3: Select "Inateck KB05111" on the Surface Pro.
4. Step 4: When the blue indicator stays on, the KB05111 is successfully paired with the Surface Pro.

Note: If the KB05111 does not work despite the blue indicator being on, it may have been paired with another nearby computer. Follow the steps in "Troubleshooting in Bluetooth Pairing" to resolve this.

3. Troubleshooting in Bluetooth Pairing

1. Step 1: Delete all Bluetooth pairing records related to KB05111 on the Surface Pro.
2. Step 2: Hold Fn + Esc keys simultaneously for 5 seconds. All 3 indicators will flash 3 times, and then the blue indicator will flash, indicating the keyboard has entered Bluetooth pairing mode. Re-pair the keyboard with the Surface Pro.

4. LED Indicator

Note: "Flashing" means the light flashes 3 times per second.

5. Keyboard Backlight

1. Press Fn + Esc simultaneously to adjust the backlight color. There are 7 colors available.
2. Press Fn + Shift simultaneously to adjust the backlight brightness. There are 3 levels of brightness.

Notes:

• When the battery level is below 15%, the backlight turns off automatically.
• The backlight turns off automatically if the keyboard is idle for two minutes. Press any key to wake it up.

6. Function Keys

6.1. How to Use F1-F12

You can press the Fn + Esc keys to enable/disable the Fn lock. Pressing them again will unlock the Fn key. The keyboard disables the Fn key lock by default.

When Fn lock is enabled:

• Pressing a function key (e.g., F1) triggers its specific functionality.
• Pressing Fn + Esc dims the screen brightness.
• This applies to all F Keys (F1-F12).

When Fn lock is disabled (Default Status):

• Pressing Esc dims the screen brightness.
• Pressing Fn + Esc simultaneously uses the functionality owned by the F1 key.

6.2. Fn+Key Combinations

• Fn + Shift: Check the Battery Level
• Fn + Del: Turn on/off Touch Pad
• Fn + Esc: Enter Bluetooth Pairing Mode
• Fn + Esc: Enable/Disable Fn Lock

7. Restore Factory Setting

If you are unsure about your settings or encountering issues, you can restore the factory settings. Hold Fn + Esc keys simultaneously for 5 seconds.

Note: After a factory reset, all settings, including Bluetooth pairing, will revert to their original status.

8. Check Battery Level

When the KB05111 is not being charged, press Fn + Shift simultaneously to check the battery level.

9. Charging

When the battery level is below 20%, the red indicator will flash. Recharge the KB05111 promptly. The recommended charging voltage and current are 5V and 250mA, respectively. Connect the USB cable to a cellphone charger or a computer's USB port. The keyboard will be fully charged in approximately 4-5 hours.

Note: It is not recommended to charge the KB05111 with a fast charger.

10. Sleeping Mode

• When the KB05111 is idle for 2 minutes, its backlight turns off.
• When the KB05111 is idle for 2 hours, it enters deep sleep mode, disrupting the Bluetooth connection. The connection recovers when you press any key.

Notes:

• To wake the keyboard from sleep, press any key. Tapping the trackpad will not wake it up.
• For adjustments to the backlight timeout or sleep mode interval, contact customer service for potential firmware upgrades.

11. Product Specification

• Bluetooth Version: V5.2
• Effective Range: 10m
• Charging Time: 4~5h
• Continuously Working Time with Backlight: About 8h
• Continuously Working Time without Backlight: About 187h
• Working Temperature: -10℃ ~55℃
• Bluetooth Operating Frequency: 2402~2480MHz
• Key Press Force: 60±10g
• Battery Capacity: 750mAh

12. Packing List

• KB05111 *1
• Type-C Charging Cable *1
• User Manual *1

Compliance Information

FCC Note

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the Users, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user's authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement. This equipment complies with FCC's RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter.

EU/UK Declaration of Conformity

Inateck Co., Ltd. hereby declares that this device complies with the Directive 2014/53/EU and SI 2017 No. 1206. A copy of the Declaration of Conformity can be accessed from https://www.inateck.de/pages/euro-compliance.

Service Center & Manufacturer

Service Center

Europe:

F&M Technology GmbH
Tel: +49 341 5199 8410 (Working day 8 AM - 4 PM CET)
Fax: +49 341 5199 8413
Address: Fraunhoferstraße 7, 04178 Leipzig, Deutschland

North America:

Inateck Technology Inc.
Tel: +1 (909) 698 7018 (Working day 9 AM - 5 PM PST)
Address: 2078 Francis St., Unit 14-02, Ontario, CA 91761, USA

UK REP:

Inateck Technology (UK) Ltd.
95 High Street, Office B, Great Missenden, United Kingdom, HP16 0AL
Tel: +44 20 3239 9869

Manufacturer

Shenzhen Licheng Technology Co., Ltd.
Address: Suite 2507, Block 11 in Tian An Cloud Park, Bantian Street, Longgang District, Shenzhen, Guangdong, China