User Manual for ViewSonic models including: LDU32M, 2AWP8-LDU32M, 2AWP8LDU32M, Digital Signage Optical Imaging Touch Screen, Optical Imaging Touch Screen, Imaging Touch Screen, Touch Screen
SHENZHEN COLOR COMMERCIAL DISPLAY TECHNOLOGY CO.,LIMITED LDU32M 2AWP8-LDU32M 2AWP8LDU32M ldu32m
File Info : application/pdf, 6 Pages, 2.09MB
DocumentDocumentFCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following Two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver Is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure Power switch, driver board and industrial PC Inside back board. Non-professionals, do not open. LINE_OUT USB*2 VGA DC_IN MIC_IN LAN USB*2 HDMI total 4 pcs of fixing M6 screws to fix Wall bracket to wall total 4 pcs of wall bracket fixing screws total 4 pcs of fixing M6 screws to fix Wall bracket to wall Digital Signage 400 10 8 4 4 64G SSD/500GHDDMicrosoft Word 2010 Microsoft Word 2010