Godox TL30 RGB Tube Light Instruction Manual

Foreword

Thank you for purchasing this Godox Product!

This RGB Tube Light TL30 is a multifunctional RGB light with dual color temperature, high light brightness, and wireless adjustment. It is suitable for almost all shooting occasions, such as live streaming, camping, makeup, portrait shooting, video recording, wedding photography, children photography, and more. It is portable and easy to operate.

Features:

• Freely switch between LED CCT mode, RGB mode, and 37 special effects modes.
• Easy adjustment of color temperature, light brightness, hue, and color saturation.
• Remote control via smartphone APP.
• Use in combination to create more creative light groups.
• Both ends have magnetic absorption function, allowing attachment to iron surfaces.
• Lightweight and portable, can be held by hand, with flexible angle adjustment.

Warning

• Always keep this product dry. Do not use in rain or in damp conditions.
• Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center.
• Keep out of reach of children.
• As this product does not have waterproof function, please take measures for waterproofing in rainy or damp environments.
• Do not use the flash unit in the presence of flammable gases, chemicals, or other similar materials. In certain circumstances, these materials may be sensitive to the strong light emitting from this flash unit, potentially causing fire or electromagnetic interference.
• As this product has a built-in lithium battery, do not disassemble, impact, squeeze, or put it into fire. If serious bulging occurs, please discontinue use. Do not use or store the product if the ambient temperature exceeds 40°C (104°F).

Names of Parts

The light features the following components:

1. Main Body

The primary structure of the light.

2. Power Switch

Button to turn the light on/off.

3. MOD Button

Button to cycle through different modes (CCT, RGB, FX).

4. DIM Button

Button to adjust brightness.

5. Select Dial

Dial for adjusting parameters like color temperature, brightness, hue, saturation, or selecting modes/effects.

6. Display

OLED screen showing current settings and mode.

7. Type-C USB Port

Port for charging the device.

8. Screw Hole

Standard thread for mounting.

9. Magnetic Absorption

Magnets located at the ends for attachment to metal surfaces.

What's in the Box

• Body *1
• Metal Piece *3
• 3M Paster * 3 pairs
• Portable Bag *1
• Type-C Charging Cable *1
• Lanyard *1
• Instruction Manual *1

Battery Management

1. Power Supply

The TL30 features a built-in lithium battery that provides approximately 1 hour of lighting at 100% brightness when fully charged. The light can also be powered and charged via a USB cable.

2. Charge

Using a 5V/2A charger (sold separately), a full charge takes about 1 hour and 30 minutes. The battery indicator on the display will blink during charging and show full bars when charging is complete.

Operation

1. Power Switch

Long press the power switch button for 1.5 seconds to turn the light on or off. The OLED panel will display the current information upon startup.

Example Display: >5600K 100 G/M:+49 CCT

2. Mode Selection: CCT Mode / RGB Mode / Special Effects Mode

Press the MOD button to switch between different modes:

• CCT Mode: Displays color temperature (e.g., >2700K 100 G/M:+49 CCT).
• HSI Mode (RGB Mode): Displays Hue, Saturation, and Intensity (e.g., >H:354 100 S:99 HSI).
• FX Mode: Indicates special effects mode (e.g., FX).

2.1 Bicolor (CCT) Mode

2.1.1 Color Temperature Adjustment:

Turn the Select Dial to adjust the color temperature from 2700K to 6500K. Adjustments can be made in 500-unit steps by turning quickly or 100-unit steps normally. Press the DIM button again to confirm the setting.

Example Display: >2700K 100 G/M:+49 CCT

2.1.2 Brightness Adjustment:

Press the DIM button. The brightness value will flash. Turn the Select Dial to adjust the brightness from 0% to 100%. Adjustments can be made in 10-unit steps quickly or 1-unit steps normally. Press the DIM button again to confirm.

Example Display: >2700K 20 G/M:+49 CCT

2.1.3 Hue (G/M) Adjustment:

Press the MOD button to switch to the CCT interface. Press down the Select Dial to select G/M. Turn the Select Dial to adjust the hue (green/magenta shift) from -50 to +50. Adjustments can be made in 5-unit steps quickly or 1-unit steps normally.

Example Display: 2700K 20 >G/M:+50 CCT

2.2 Colorful (HSI) Mode

2.2.1 Hue (H) Adjustment:

Press the MOD button to switch to the HSI interface. Press down the Select Dial to select H. Turn the Select Dial to adjust the hue from 0° to 360°. Adjustments can be made in 10-unit steps quickly or 1-unit steps normally.

Example Display: >H:354 100 S:99 HSI

2.2.2 Saturation (S) Adjustment:

In the HSI interface, press down the Select Dial to select S. Turn the Select Dial to adjust the saturation from 0% to 100%. Adjustments can be made in 10-unit steps quickly or 1-unit steps normally.

Example Display: H:354 100 >S:99 HSI

2.3 Special Effects (FX) Mode

The TL30 offers 13 categories with a total of 37 special effects modes.

2.3.1 Selecting Effect Categories:

Press the MOD button to switch to the FX interface. Turn the Select Dial to choose from effect categories 1 to 13.

Example Display: >1: I 2: I 100 3: I FX

2.3.2 Selecting Specific Effects within a Category:

After choosing a category, press down the multifunctional Select Dial to cycle through the available effects (e.g., I, II, III).

Example Display: >1: III 2: I 100 3: I FX

List of Special Effects Categories and Modes:

Bluetooth Control

4.1 Bluetooth ON/OFF:

Long press the MOD button to enter the Bluetooth interface. Turn the Select Dial to choose Bluetooth and press down to set it to ON or OFF. The display will show >:ON or OFF. The MAC address is displayed as MAC:EE93.

4.2 APP Download:

Scan the QR code provided to download the "Godox Light" smartphone APP, available for both Android and Apple systems. For detailed APP operations, please refer to the "Help" section within the APP.

4.3 Bluetooth Reset Function:

In the Bluetooth interface, turn the Select Dial to choose RESET. Press down the Select Dial until "RESET..." is displayed. The screen will automatically return to the Bluetooth interface after a successful reset.

Note: The APP can be used directly with the first installed device (smartphone or iPad). When switching to another mobile device, the light must be reset before the APP can be used normally.

Technical Data

* Product design and specifications are subject to change without notice.

Maintenance

This product, excluding consumables like the adapter and adapter cable, is supported with a one-year warranty. Avoid sudden impacts and dust the product regularly. Maintenance must be performed by an authorized maintenance department that can provide original accessories. Unauthorized service will void the warranty. If the product fails or gets wet, do not use it until it is repaired by professionals. Changes made to specifications or designs may not be reflected in this manual.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Warranty

Dear customers, this warranty card is an important certificate for applying for maintenance service. Please fill in the following form in coordination with the seller and keep it safe. Thank you!

Product Information:

• Model: TL30
• Product Code Number: (To be filled by seller)

Customer Information:

• Name: (To be filled by customer)
• Address: (To be filled by customer)
• Contact Number: (To be filled by customer)

Seller Information:

• Name: (To be filled by seller)
• Contact Number: (To be filled by seller)
• Address: (To be filled by seller)
• Date of Sale: (To be filled by seller)

Note: This form shall be sealed by the seller.

Applicable Products

This document applies to the products listed on the Product Maintenance Information. Other products or accessories (e.g., promotional items, giveaways, and additional accessories) are not included in this warranty scope.

Warranty Period

The warranty period for products and accessories is implemented according to the relevant Product Maintenance Information. The warranty period is calculated from the date of purchase, which is registered on the warranty card.

How to Get the Maintenance Service

If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service hotline for assistance. When applying for maintenance service, you must provide a valid warranty card. If a valid warranty card cannot be provided, Godox may offer maintenance service upon confirmation that the product or accessory is covered under the maintenance scope, but this is not considered an obligation.

Inapplicable Cases

The guarantee and service offered by this document are not applicable in the following cases:

• The product or accessory has expired its warranty period.
• Breakage or damage caused by inappropriate usage, maintenance, or preservation (e.g., improper packing, improper usage, improper plugging/unplugging of external equipment, falling off or squeezing by external force, contact with or exposure to improper temperature, solvents, acids, bases, flooding, or damp environments).
• Breakage or damage caused by non-authorized institutions or staff during installation, maintenance, alteration, addition, or detachment.
• The original identifying information of the product or accessory has been modified, altered, or removed.
• Absence of a valid warranty card.
• Breakage or damage caused by using illegally authorized, non-standard, or non-publicly released software.
• Breakage or damage caused by force majeure or accident.
• Breakage or damage not attributable to the product itself.

In such situations, you should seek solutions from the relevant responsible parties, and Godox assumes no responsibility. Damage caused by parts, accessories, or software beyond the warranty period or scope is not covered. Normal discoloration, abrasion, and consumption are not considered breakage within the maintenance scope.

Maintenance and Service Support Information

The warranty period and service types for products are implemented according to the following Product Maintenance Information:

Godox After-sale Service Call: 0755-29609320-8062