Baseus CGNL020101 Super Energy Air Car Jump Starter

Safety Instructions

*Improper use of the product can easily cause damage to the product or may endanger personal and property safety.

1. Ensure that the EC5 plug is fully inserted into the jump starter port before using. Do not use when remaining power is less than 50% or the power supply is hot.
2. Do not use the jump starter to continuously start the car at a high frequency. The interval between two ignitions must be greater than 30 s.
3. After connecting the smart ignition clip to the jump starter, please start the car immediately. If the car will not start, check whether the smart ignition clip is connected firmly. Also check whether there is rust or dirt on the surface of the battery interface. Start the car after cleaning the surface of the battery terminals. If the car cannot start after three consecutive attempts, please stop jumping the battery.
4. Avoid using electrical appliances or loads that exceed the output current of this product. Do not store in an environment with high temperature, strong light, and strong magnetic fields. Keep it dry and away from water. Do not place the product in other harsh environments such as close to heat and fire.
5. The consumer shall be liable for any personal and property damage resulting from their improper use against the user manual or ignoring the warning, to which our company will not bear any legal liability.

Product Parameters

Packing List

• Jump starter x 1
• User manual x 1
• Warranty card x 1
• Smart ignition clip x 1
• Cable x 1

Product Diagram

Power button: Located on the top of the device.

EC5 Port: For connecting the smart ignition clip.

Type-C Input: For charging the jump starter.

USB Output: For charging other devices.

Smart ignition clip: Connects to the car battery.

Power display: Press the power button to check remaining power. One bar on the indicator is 25% and four bars are 100% power.

Operation Steps

1. Insert the smart ignition clip into the EC5 port of the jump starter. The indicator of the smart ignition clip blinks red and green alternately.
2. Clip the smart ignition clip to the car battery (the positive terminal of the smart ignition clip to the car battery, the negative terminal of the smart ignition clip corresponds to the negative terminal of the car battery).
3. When the green LED indicator of the smart ignition clip is steady on, the car can be started.

*NOTE:

1. Do not start the car continuously. The start interval should not exceed 5 s, and the second start needs an interval of longer than 30 s.
2. To protect the battery, remove the jump starter immediately after starting the car.

Lamp Description

Press and hold the power button for 3 s to turn on or off the flashlight function. When the flashlight is on, press the power button to switch between steady on, SOS, and blinking mode.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly. You must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person, or mechanical damage through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer's / importer's authorized representative:

Importer: Alza.cz a.s.

Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7

CIN: 27082440

Subject of the declaration:

Title: Car Starter

Model / Type: Baseus-CGNL020101

The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):

• Directive No. 2014/30/EU
• Directive No. 2014/35/EU
• Directive No. 2011/65/EU as amended 2015/863/EU

Prague

CE

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

[WEEE symbol]