GameMax Storm Mid-Tower Chassis

Package Content

Connectors

Front Panel Connectors

• HD AUDIO: Standard audio connector for microphones and headphones.
• USB3.0: High-speed USB 3.0 connector for data transfer.
• PWR SW: Connector for the system's power button.
• HDD LED: Connector for the hard drive activity indicator light.
• PWR LED: Connector for the system power indicator light.

Internal Connectors (Example Pinouts)

PORT 1L/1R (USB 2.0)

• VBUS (+5V Power)
• SSRX1-, SSRX1+ (Data -)
• GND (Ground)
• SSTX1-, SSTX1+ (Data +)

PORT 2L/2R (USB 2.0)

• VBUS (+5V Power)
• SSRX2-, SSRX2+ (Data -)
• GND (Ground)
• SSTX2-, SSTX2+ (Data +)

HD AUDIO

• MIC IN (Microphone Input)
• GND (Ground)
• LINE OUT (Audio Output)
• MIC POWER (Microphone Power)

I/O Panel

Front Panel Layout

• ▶️ Power Button
• ? Reset Button
• ? HD Audio Port
• ? USB 3.0 Port
• ? Power LED
• ? HDD LED
• ? USB 2.0 Ports (x2)

Chassis Overview (Exploded View)

Main Components:

• 1. Front Panel: The removable front fascia, providing access to drive bays and airflow.
• 2. Chassis: The main structural frame of the computer case.
• 3. Tempered Glass Left Side Panel: A transparent panel allowing visibility of internal components.
• 4. Right Side Panel: The solid panel covering the right side of the chassis.
• 5. HDD Bracket: A mount designed for installing 3.5" HDDs or 2.5" SSDs.
• 6. Magnetic Dust Filter (Top): A removable filter located on the top vents to prevent dust ingress.
• 7. Dust Filter (Bottom): A removable filter located on the bottom vents for dust prevention.

Installation Guide

Removing Panels:

• Side Panels: Detach the side panels to gain access to the internal components and cable management areas.
• Front Panel: Remove the front panel to access drive bays or for easier installation of components and airflow.

Component Installation:

Power Supply Unit (PSU):

• Insert the PSU into its designated bay, typically from the left side of the chassis, and secure it with the provided screws.

Motherboard Installation:

• First, insert the Motherboard IO Shield into the rectangular opening at the rear of the chassis.
• Next, place the motherboard onto the pre-installed standoffs within the chassis, aligning the screw holes, and secure it with screws.

Graphics Card (GPU) Installation:

• Remove the PCI-E slot bracket(s) from the rear of the chassis corresponding to the desired PCI-E slot.
• Install the graphics card into the appropriate PCI-E slot on the motherboard.

Storage Drive Installation (HDD/SSD):

• 3.5" HDDs or 2.5" SSDs can be mounted in the dedicated HDD bracket.
• Alternatively, 2.5" SSDs or 3.5" HDDs can be mounted directly onto the PSU cover using screws.
• The primary 3.5" HDD installation bay is also compatible with 2.5" SSDs.

Cooling and Airflow

Fan Cooling System:

• Front: Supports up to 3x120mm or 2x140mm fans (Optional).
• Top: Supports up to 2x120mm or 2x140mm fans (Optional).
• Rear: Supports 1x120mm fan (Included).

Liquid Cooling System:

• Front: Supports radiators from 120mm up to 360mm (Optional).
• Top: Supports radiators from 120mm up to 240mm (Optional).
• Rear: Supports 120mm radiators (Optional).

Airflow Direction:

• Proper airflow management is crucial for optimal system cooling. Generally, cool air is drawn in from the front and bottom, while hot air is exhausted from the rear and top of the chassis. Ensure unobstructed airflow paths.