Greenworks High Pressure Foam Cannon PAQ713

Safety Instructions

WARNING: Please read and comply with these original operating instructions prior to initial operation and store them for later use or subsequent owners.

To reduce the risk of injury, the user must read and understand the operator's manual for their pressure washer before using this accessory. It fits many brands of pressure washers up to 3700 PSI.

Ensure compatibility and proper fitment before use. Wear eye protection with side shields that are marked to comply with ANSI Z87.1. There is a risk of fluid injection. Do not point at any person, pets, electrical devices, or the unit itself. Turn the pressure washer off before changing or adjusting accessories.

For cold water use only. Save these instructions. Refer to them frequently and use them to instruct other users. If you loan the product, loan these instructions also.

WARNING: Do not hold the nozzle of the High Pressure Soap Applicator when it is on.

Product Information

If any parts are damaged or missing, please call 1-888-90WORKS (888.909.6757) for Greenworks customer service.

Product Specifications

• Connection: 1/4 in. Quick Connect Plug Inlet
• Maximum Pressure: Up to 3700 PSI
• Maximum Water Flow: 3 GPM
• Maximum Water Temperature: 104°F

Proper Use

The high-pressure soap applicator is designed to apply detergent to a variety of surfaces. It can be used for removing dirt and mold from decks, cement patios, house siding, cars, boats, motorcycles, patio furniture, grills, and more!

Application

Installation

The Greenworks high-pressure soap applicator allows you to use detergent while using your pressure washer for high-pressure cleaning. See Figures 1-3.

Installation Diagram Description

The figures illustrate the assembly and connection of the foam cannon to a pressure washer. The main components are:

• Pressure Washer Spray Wand: The wand from the pressure washer unit.
• Attachment Head: The top part of the foam cannon that connects to the spray wand.
• Detergent Container: The lower part of the foam cannon that holds the detergent solution.

Installation Steps:

1. Turn the attachment head counter-clockwise to access the detergent container.
2. Hold the detergent container with a firm grip and add detergent.
3. Once full, install the attachment head and securely tighten it.
4. Using the quick connect coupler, install onto the pressure washer spray wand just as you would with any type of nozzle.

Adjusting the Flow Knob

The amount of detergent in the spray is controlled by the detergent flow knob. See Figure 4.

Flow Adjustment Diagram Description

Figure 4 shows the detergent flow knob and its settings:

• Turn the knob all the way forward to use the detergent at its highest concentration.
• Turn the knob all the way back to spray water only.

WARNING: Do not make adjustments while using the pressure washer. Stop spraying and lock out the trigger before making adjustments. Keep hands away from the nozzle tip when spraying.

NOTE: When pointing the spray wand upward, water may discharge from the sides of the spray wand nozzle. To stop this discharge, point the spray wand downward for five seconds and then resume normal operation.

Maintenance

Before storing, thoroughly rinse the detergent bottle to remove any detergent residue, and allow it to dry completely.

General Information

Environmental Protection

The packaging material can be recycled. Please do not place the packaging into ordinary trash for disposal, but arrange for proper recycling.

Old appliances contain valuable material that can be recycled. Please arrange for the proper recycling of appliances. Please dispose of your old appliances using the appropriate collection system.

Limited Warranty

GREENWORKS hereby warrants this product, to the original purchaser with proof of purchase, for a period of three (3) years against defects in materials, parts, or workmanship.

GREENWORKS, at its own discretion, will repair or replace any and all parts found to be defective through normal use, free of charge to the customer. This warranty is valid only for units that have been used for personal use, have not been hired or rented for industrial/commercial use, and have been maintained in accordance with the instructions in the owner's manual supplied with the product from new.

Items Not Covered by Warranty:

1. Any part that has become inoperative due to misuse, commercial use, abuse, neglect, accidents, improper maintenance, or alteration; or
2. The unit, if it has not been operated and/or maintained in accordance with the owner's manual; or
3. Normal wear, except as noted below;
4. Routine maintenance items such as draining the water to avoid freezing/ice damage to the pump and components.
5. Normal deterioration of the exterior finish due to use or exposure.

GREENWORKS Helpline (1-888-90WORKS):

Warranty service is available by calling our toll-free helpline, 9 am to 5 pm EST, at 1-888-909-6757 (1-888-90WORKS).

Transportation Charges:

Transportation charges for the movement of any power equipment unit or attachment are the responsibility of the purchaser. It is the purchaser's responsibility to pay transportation charges for any part submitted for replacement under this warranty unless such return is requested in writing by GREENWORKS.

Addresses:

• USA Address: Greenworks Tools, P.O. Box 1238, Mooresville, NC 28115
• Canadian Address: Greenworks Tools Canada Inc., P.O. Box 93095, Newmarket, Ontario L3Y 8K3