Greenworks High Pressure Foam Cannon PAQ713
Safety Instructions
Warning
Please read and comply with these original operating instructions prior to initial operation and store them for later use or subsequent owners.
To reduce the risk of injury, the user must read and understand the operator's manual for their pressure washer before using this accessory. It fits many brands of pressure washers up to 3700 PSI. Ensure compatibility and proper fitment before use. Wear eye protection with side shields that are marked to comply with ANSI Z87.1. There is a risk of fluid injection. Do not point at any person, pets, electrical devices, or the unit itself. Turn the pressure washer off before changing or adjusting accessories. For cold water use only. Save these instructions. Refer to them frequently and use them to instruct other users. If you loan the product, loan them these instructions also.
Symbol Warning: Do not hold the nozzle of the High Pressure Soap Applicator when it is on.
Product Information
If any parts are damaged or missing, please call Greenworks customer service at 1-888-90WORKS (888.909.6757).
Product Specifications
- Connection: 1/4 in. Quick Connect Plug Inlet
- Maximum Pressure: Up to 3700 PSI
- Maximum Water Flow: 3 GPM
- Maximum Water Temperature: 104°F (40°C)
Proper Use
The high pressure soap applicator is designed to apply detergent to a variety of surfaces. It can be used for removing dirt and mold from decks, cement patios, house siding, cars, boats, motorcycles, patio furniture, grills, and more.
Application and Installation
The Greenworks high pressure soap applicator allows you to use detergent while using your pressure washer for high-pressure cleaning. See Figures 1-3.
Figure 1: Shows the detergent container and attachment head.
Figure 2: Illustrates the attachment head and detergent container.
Figure 3: Depicts the pressure washer spray wand and the attachment head.
- Turn the attachment head counter-clockwise to access the detergent container.
- Hold the detergent container with a firm grip and add detergent.
- Once full, install the attachment head and securely tighten.
- Using the quick connect coupler, install onto the pressure washer spray wand just as you would with any type of nozzle.
Warning: Do not make adjustments while using the pressure washer. Stop spraying and lock out the trigger before making adjustments. Keep hands away from the nozzle tip when spraying.
Note: When pointing the spray wand upward, water may discharge from the sides of the spray wand nozzle. To stop this discharge, point the spray wand downward for five seconds and then resume normal operation.
Adjusting the Flow Knob
The amount of detergent in the spray is controlled by the detergent flow knob. See Figure 4.
Figure 4: Shows the detergent flow knob.
Turn the knob all the way forward to use the detergent at its highest concentration.
Turn the knob all the way back to spray water only.
Maintenance
Before storing, thoroughly rinse the detergent bottle to remove any detergent residue, and allow to dry completely.
General Information and Environmental Protection
The packaging material can be recycled. Please do not place the packaging into the ordinary trash for disposal, but arrange for proper recycling.
Old appliances contain valuable material that can be recycled. Please arrange for the proper recycling of appliances. Please dispose of your old appliances using the appropriate collection system.
Warranty Information
Greenworks hereby warrants this product, to the original purchaser with proof of purchase, for a period of three (3) years against defects in materials, parts, or workmanship.
Greenworks, at its own discretion, will repair or replace any and all parts found to be defective through normal use, free of charge to the customer. This warranty is valid only for units which have been used for personal use, have not been hired or rented for industrial/commercial use, and have been maintained in accordance with the instructions in the owner's manual supplied with the product from new.
Items Not Covered by Warranty:
- Any part that has become inoperative due to misuse, commercial use, abuse, neglect, accidents, improper maintenance, or alteration.
- The unit, if it has not been operated and/or maintained in accordance with the owner's manual.
- Normal wear, except as noted below.
- Routine maintenance items such as draining the water to avoid freezing/ice damage to the pump and components.
- Normal deterioration of the exterior finish due to use or exposure.
Greenworks Helpline:
Warranty service is available by calling our toll-free helpline, 9 am to 5 pm EST, at 1-888-909-6757 (1-888-90WORKS).
Transportation Charges:
Transportation charges for the movement of any power equipment unit or attachment are the responsibility of the purchaser. It is the purchaser's responsibility to pay transportation charges for any part submitted for replacement under this warranty unless such return is requested in writing by Greenworks.
Addresses:
USA Address:
Greenworks Tools
P.O. Box 1238
Mooresville, NC 28115
Canadian Address:
Greenworks Tools Canada Inc.
P.O. Box 93095, Newmarket, Ontario
L3Y 8K3
