RACING WHEEL SV 950 User Manual

Introduction

Thank you for purchasing the RACING WHEEL SV 950. Before using the wheel, please read this instruction manual carefully and keep it for future reference.

Features

• Compatibility: XBOX SERIES X/S, XBOX ONE, PS4, and PC (X-Input & Direct Input).
• Compatible with all racing games on these platforms.
• An official controller is required for use on XBOX and PS4.
• Compatible with Windows 8/10/11.
• 900 or 270 degree steering rotation.
• Steering sensitivity control (3 positions).
• 6 programmable keys for tailor-made button configuration.
• Dual motors vibration-effect.
• Fully analog driving control for a more realistic experience.
• Spring-loaded acceleration and brake control pedals.
• Gaming headset support for XBOX and PS4.

Button Layout and Default Configuration

The default button configuration is preset according to GRAN TURISMO buttons configuration. See table on page 3.

Button Layout Descriptions

• Steering axis: Controls the direction of the wheel.
• Paddle shifters: Mounted on the steering wheel for gear changes.
• USB port: For connecting the official PS4/XBOX controller.
• Input jack for headset: For connecting a gaming headset.
• Port for pedalboard: Connects the pedals to the steering wheel.
• Brake/Gas Pedals: For acceleration and braking control.

Button Mapping Table

Installation

Setup the wheel on PS4

1. Ensure the PS4 is turned off.
2. Plug the wheel cable into a USB port on the console.
3. Plug the pedal cable into the steering wheel.
4. Connect an official PS4 controller to the USB port on the wheel using the provided USB/Micro USB cable. IMPORTANT: The controller must be switched off.
5. Turn on the console using the power button.
6. The red LED on the wheel will stay lit. Press the HOME button on the wheel to connect it to the console.
7. The steering wheel is now ready to use.

Setup the wheel on XBOX SERIES X/S and XBOX ONE

1. Ensure the XBOX is turned off.
2. Plug the wheel cable into a USB port on the console.
3. Plug the pedal cable into the steering wheel.
4. Connect an official XBOX controller to the USB port on the wheel using the provided cable. IMPORTANT: The controller must be switched off.
5. Turn on the console using the power button.
6. The red LED on the wheel stays lit, as does the XBOX button on the controller. Press the HOME button on the wheel to connect it to the console.
7. The steering wheel is now ready to use.

Setup the wheel on PC

1. Turn on the PC.
2. Plug the pedal cable into the steering wheel.
3. Connect the wheel's USB cable to a PC USB port. A Windows utility will start automatically to install the device. The red LED will remain on once installation is complete. The wheel is ready to use.
4. IMPORTANT: The steering wheel uses X-Input by default, making it compatible with recent games. For older games using Direct Input, press and hold the Home/Mode button for 3 seconds; the LED will flash once to indicate the change. This mode will then be used by default. You can switch modes anytime by holding the Home/Mode button for 3 seconds.
5. To set up the wheel in Direct Input mode, install the driver before connecting the wheel to the PC: www.superdrive-gaming.com.

Programming Function

You can play GRAN TURISMO or other racing games with the default button configuration. For games requiring different configurations, you have two options:

• Adjust button configuration within the game's Options/Controllers menu. This allows saving your custom configuration. IMPORTANT: The RACING WHEEL SV 950 is recognized as a "game controller" in game menus. Select "game controller" settings, not "steering wheel" settings.
• Use the "on-the-go" programming function of the RACING WHEEL SV 950. This allows reprogramming buttons without entering game menus, but the configuration is not saved after the console is turned off or the wheel is disconnected.

6 keys can be programmed:

• Left paddle
• Right paddle
• Left pedal
• Right pedal
• L3
• R3

Programming Procedure

1. Press the PROG button. The red LED will flash fast.
2. Press one of the 6 programmable keys. The red LED will flash slowly.
3. Press the button you want to reassign (e.g., □, ×, O, △, L1, R1, L2, R2). The LED turns red again, the key is now programmed.
4. Repeat for other buttons if necessary.

Resetting a Programmed Key

1. Press PROG button (red LED flashes fast).
2. Press the programmed key to reset (red LED flashes slowly).
3. Press the key again to confirm reset. The LED turns red, the key is reset to default.

Resetting All Programmed Keys

1. Press PROG button (red LED flashes fast).
2. Press and hold the OPTIONS button for 4 seconds. The LED turns red again, all keys are reset to default.
3. Sensitivity is also reset to its initial default state (low on PC, medium on consoles).
4. You can also unplug the wheel to reset the configuration.

Sensitivity Adjustment

Adjust steering sensitivity for different game environments (Off-Road, Grand Prix, etc.) using the switch on the left of the steering wheel.

• MID Sensitivity: Press PROG, then press Left/Right on D-PAD. Small steering angle, good for quick turns.
• HIGH Sensitivity: Press PROG, then press Up on D-PAD. Very small steering angle, ideal for sharp turns.
• LOW Sensitivity: Press PROG, then press Down on D-PAD. Normal steering angle, suitable for most racing games.

Rotation and Calibration

Rotation Modes

The RACING WHEEL SV 950 has 2 mechanical rotation modes: 270° or 900°. Switch between them using the slider.

Rotation Programming (900° Mode)

Digitally program maximum rotation angle from 120° to 900° in 900° mode:

1. Set the switch to 900°.
2. Press PROG button (red LED flashes fast).
3. Turn the wheel left or right to the desired angle (minimum 60°).
4. Press OPTIONS. The LED turns red, the angle is now set as maximum.

Note: This is digital programming; the wheel is not mechanically locked. The effect occurs only in-game.

To Clear Programmed Rotation

1. Press PROG button (red LED flashes fast).
2. Press OPTIONS for 4 seconds. The LED turns red, rotation angle resets to 900°.

Calibration

For precise steering settings and to avoid minor deviations, calibrate the wheel:

1. Press "L1+L2+R1+R2" simultaneously (LED flashes fast).
2. Turn wheel fully left (LED flashes slowly at max), then fully right (LED flashes slowly at max), then return to center (LED flashes quickly).
3. Press the right pedal fully, then the left pedal fully. LED flashes slowly when pressed, quickly when released.
4. Finally, press OPTIONS/MENU (LED stays lit) to complete calibration.

Troubleshooting

If the wheel does not work after connection, unplug it, turn off the console, and follow the setup steps carefully in order. On XBOX SERIES X/S, XBOX ONE, PS4, ensure the controller connected to the wheel is powered off. Then retry the steps.

Precautions of Use

• Do not use this product for purposes other than those described.
• Avoid humid environments, liquids, or splashes. Keep the wheel in a dry place after use.
• Never attempt to disassemble or reassemble the wheel yourself.
• Do not apply excessive pressure or subject the device to violent shocks.
• Stop use immediately if you feel tired, uncomfortable, or experience pain. Consult a doctor if symptoms persist.
• Take breaks every 30 minutes.
• Keep away from direct sunlight and extreme temperatures, which can damage the device.
• This product contains small parts that may be swallowed and is not intended for children under 3 years of age. Do not let children play with the wheel or cables.

Contact and Customer Support

For more information about the RACING WHEEL SV 950 or other Subsonic products, contact the Subsonic team.

Email: contact@subsonic.com

Respect the Environment

Please do not discard electrical and electronic equipment with household waste. Take it to a recycling collection center.

Manufacturer: SUBSONIC

Address: 314, allée des noisetiers, 69760 Limonest - France

Website: www.subsonic.com

Product Website: www.superdrive-gaming.com