ResMed AirFit™ F20 Full Face Mask Fitting Guide

Product Information

The ResMed AirFit™ F20 is a full face mask designed for respiratory therapy. A specific version, "for Her," is also available.

Actual Size of Template: 5 1/2 inches (Width) x 6 7/8 inches (Height).

How to Use the Fitting Template

This printable template is a tool for fitting the ResMed AirFit F20 mask. The ruler printed on it is for scaling purposes to ensure accurate measurements.

1. Ensure the template is printed at its actual size (100% scale).
2. Carefully cut out the template along the dotted line [scissors].
3. Refer to the diagram on the template to determine the appropriate cushion size for your mask.

Fitting Diagram and Size Guide

The fitting guide features a diagram of a human face to assist in selecting the correct mask cushion size. Key elements include:

• A line drawing of a face, showing the forehead, nose, and mouth area. Measurement points are indicated by arrows: one from the bridge of the nose downwards, and another from below the lower lip upwards towards the nose.
• A vertical ruler along the right side of the template, marked in inches from 0 to 7 inches, used for measuring the face.
• A series of colored circles representing mask cushion sizes, positioned next to the ruler:
  • Red circle: Small (S)
  • Blue circle: Medium (M)
  • Black circle: Large (L)
• Dashed lines with arrows connect specific points on the face diagram to the corresponding size indicators (S, M, L), guiding the user to match their facial measurements to the correct cushion size.
• An inset diagram provides a side profile view of how the mask should fit the face.
• The word "SIZE" is printed below the colored circles.

Regulatory and Copyright Information

© 2017 ResMed Ltd. All Rights Reserved. Specifications may change without notice. Product availability may vary across regions.
CE Rx Only 0123