Milwaukee M12 Drain Snake Service Parts List
Bulletin No.: 54-07-2570
Revised Bulletin: June 2019
Catalog No.: 2571-20
Serial Number: H23A
Wiring Instruction:
Example
00 Component Parts (Small #) Are Included When Ordering The Assembly (Large #).
Notes
- The gasket comes as a strip and has to be formed into the circle configuration.
- The cable is under pressure and can uncoil unexpectedly. Keep pressure on the cable when removing the drum cover.
- To remove the drum support, hold the drum support stationary with hand while removing the T-25 screw (7) and washer (8). Then insert a T-40 screw-driver into the support shaft. Spin the drum support off by hand while holding the support shaft stationary with the screwdriver.
- For ease of installing electronics, place blocks of wood under the handle to support the tool.
- The motor mount (29) comes with the assembly to hold the parts together. It can be discarded if a new mount is not needed.
Parts Diagram
The diagram shows an exploded view of the M12 Drain Snake. Key components are labeled with numbers corresponding to the parts list below. The diagram illustrates the assembly of the drum, motor, handles, and other internal parts.
Parts List
| FIG. | PART NO. | DESCRIPTION OF PART | NO. REQ. | FIG. | PART NO. | DESCRIPTION OF PART | NO. REQ. |
|---|---|---|---|---|---|---|---|
| 1 | 44-90-0265 | C-Ring | (2) | 37 | 31-15-0395 | Left Handle w/ Fuel Gauge Label | (1) |
| 2 | 42-36-0240 | Spring Plate | (2) | 41 | 31-42-0015 | Front Handle Cover | (1) |
| 3 | 05-81-0060 | M5 x 0.8 Pan Hd. Philips Screw | (4) | 42 | 31-42-0015 | Bucket Insert | (1) |
| 4 | Drum Cover | (1) | 43 | 42-51-0010 | Bucket | (1) | |
| 5 | 43-44-0045 | Foam Gasket | (1) | 50 | 43-54-0205 | Front Handle Assy. w/ Bushing and Retaining Rings | (1) |
| 6 | 43-11-0085 | Inner Drum (Drum Only) | (1) | 51 | 31-15-0415 | Drum Cover Assy. | (1) |
| 7 | 05-74-0115 | M5 x 0.8 Pan Hd. T-25 Screw (Left Hand) | (1) | 52 | 31-55-0010 | Drum Shroud Assy. | (1) |
| 8 | 45-88-2045 | Washer | (1) | 53 | 31-44-1045 | Handle Assy. | (1) |
| 9 | 14-46-2571 | Drum Support Kit | (1) | 54 | 14-30-1015 | Gear Case Assy. | (1) |
| 10 | Drum Shroud | (1) | 55 | 14-50-0010 | Motor Assy. | (1) | |
| 11 | 12-20-2570 | Service Nameplate (Not Shown) | (1) | 48-53-2571 | 5/16" x 25' Bulb Cable | (1) | |
| 12 | 06-82-1080 | M3 x 14 ST Housing Screw | (15) | 48-53-2572 | 5/16" x 25' Drop Head Cable | (1) | |
| 13 | Right Handle | (1) | 48-53-2573 | 1/4" x 25' Bulb Cable | (1) | ||
| 14 | 45-88-2055 | Washer | (1) | 48-53-2574 | 1/4" x 25' Drop Head Cable | (1) | |
| 17 | 06-82-7261 | 6-19 x .687 Pan Hd. Slt. Plast. T-15 Screw | (3) | 48-53-2581 | Inner Drum w/ 5/16" x 25' Bulb Cable Assy. | (1) | |
| 18 | Gear Case Assy. | (1) | 48-53-2582 | Inner Drum w/ 5/16" x 25' Drop Head Cable Assy. | (1) | ||
| 27 | Motor | (1) | 48-53-2583 | Inner Drum w/ 1/4" x 25' Bulb Cable Assy. | (1) | ||
| 29 | Motor Mount Plate | (1) | 48-53-2584 | Inner Drum w/ 1/4" x 25' Drop Head Cable Assy. | (1) | ||
| 30 | M3 x 0.5 T-10 Screw | (2) | |||||
| 31 | 06-65-0502 | M2.5 x 37mm Steel Pin | (2) | ||||
| 32 | 22-09-0120 | Fuel Gauge Lens | (1) | ||||
| 33 | 42-42-0360 | Forward/Reverse/Lock Off Shuttle | (1) | ||||
| 35 | 14-20-2005 | Electronics Assy. | (1) |
