SATEL Radio Modem Configuration and Cable Guide

This document outlines the configuration setups and essential cables for various SATEL radio modem products, ensuring seamless connectivity and power management.

SATEL-EASy+ Configuration Setup

The SATEL-EASy+ requires specific cables for power, programming, and data interface. Below is a list of compatible cables and their specifications:

Power, Programming, and Interface Cables (RS-232)

YC0200, NARS-1F: Interface adapter with 900 mA fuse, 2 m power supply wires and programming switch (D15m / D9f).
YC0204, NARS-1F-4A: Similar to NARS-1F, but with a 4A fuse (D15m / D9f).
YC0210, NARS-1F-4A-SC: Features a 2.1 mm DC socket (D15m / D9f).
YC0201, CRS-9: Direct serial interface cable, 2 m (D9m / D9f).
YC0203, CRS-9M: Direct serial interface cable, 2 m (D9m / D9m).
YC0104, CRS-2F: 2 m interface cable with 1 m power supply wires, 6.3 / 0.630 A fuse (D15m/D9f).
YC0103, CRS-2M: 2 m interface cable with 1 m power supply wires, 6.3 / 0.630 A fuse (D15m/D9m).

RS-485/422 Cables

YC0485, NARS-2: Interface adapter (D15m / screw connectors).
YC0501, CRS-PB: Profibus interface cable with 2 m power supply wires (D15m / D9m).

NMS, RS232 Cables

YC0302, CRS-NMS: 1.5 m NMS/RS232 interface cable (D15m / 2 x D9f), with 1 m power supply wires and 6.3 / 0.630 A fuse.

Power Supply Options

YP1224: DIN-rail mountable power supply, Input: 90-264 Vac, Output: 24 Vdc / 5 A.
YP1240: AC adapter (40W), with a 2.1 mm DC jack. Input: 100-240 Vac, C14 male IEC power inlet. Output: 12 Vdc / 3.34 A.
YC0904: Mains Cable C-M, compatible with CEE 7/7 (angle) and C13 female IEC connectors.

SATEL-B2 Motherboard Configuration Setup

The SATEL-B2 motherboard, with or without an enclosure, utilizes similar cabling solutions for its operation.

Power, Programming, and Interface Cables (RS-232)

YC0200, NARS-1F: Interface adapter with 900 mA fuse, 2 m power supply wires and programming switch (D15m / D9f).
YC0204, NARS-1F-4A: As NARS-1F, but with 4A fuse (D15m / D9f).
YC0210, NARS-1F-4A-SC: As NARS-1F-4A, but with 2.1 mm DC socket (D15m / D9f).
YC0201, CRS-9: Direct serial interface cable, 2 m (D9m / D9f).
YC0203, CRS-9M: Direct serial interface cable, 2 m (D9m / D9m).
YC0104, CRS-2F: 2 m interface cable with 1 m power supply wires, 6.3 / 0.630 A fuse (D15m/D9f).
YC0103, CRS-2M: 2 m interface cable with 1 m power supply wires, 6.3 / 0.630 A fuse (D15m/D9m).

Power Supply Options

YP1224: DIN-rail mountable power supply, Input: 90-264 Vac, Output: 24 Vdc / 5 A.
YP1240: AC adapter (40W), with a 2.1 mm DC jack. Input: 100-240 Vac, C14 male IEC power inlet. Output: 12 Vdc / 3.34 A.
YC0904: Mains Cable C-M, compatible with CEE 7/7 (angle) and C13 female IEC connectors.

SATEL MCCU-20 Configuration Setup

The SATEL MCCU-20, SATEL Proof-TR489, SATEL Proof-TR4+, -R4+, and SATEL Proof-TR9 models share common configuration requirements.

Power, Programming, and Interface Cables (RS-232)

YC0275, NARS-EP2: 0.15 m cable, Deutsch DT06-6S-CE06 / D15 female connector.
YC0200, NARS-1F: Interface adapter with 900 mA fuse, 2 m power supply wires and programming switch (D15m / D9f).
YC0204, NARS-1F-4A: As NARS-1F, but with 4A fuse (D15m / D9f).
YC0210, NARS-1F-4A-SC: As NARS-1F-4A, but with a 2.1 mm DC socket (D15m / D9f).
YC0201, CRS-9: Direct serial interface cable, 2 m (D9m / D9f).
YC0203, CRS-9M: Direct serial interface cable, 2 m (D9m / D9m).

Power Supply Options

YP1224: DIN-rail mountable power supply, Input: 90-264 Vac, Output: 24 Vdc / 5 A.
YP1240: AC adapter (40W), with a 2.1 mm DC jack. Input: 100-240 Vac, C14 male IEC power inlet. Output: 12 Vdc / 3.34 A.
YC0904: Mains Cable C-M, compatible with CEE 7/7 (angle) and C13 female IEC connectors.

SATEL-EASy Pro+ Configuration Setup

The SATEL-EASy Pro+ offers advanced configuration options with specialized cables.

Power, Programming, and Interface Cables (RS-232)

YC0368, CRS-35W 8-PIN: Interface cable, 2 m (8pin ODU/D9f).
YC0369, CRS-35W 8-/7-pin ODU: Interface cable, 2 m.
YC0359, CRS-35W 8-/8-pin ODU: Interface cable, 2 m.
YC0363, PROG-35W 8-pin: Programming cable, 2 m (8pin ODU/D9f).
YC0359, CRS-35W 8-/8-pin (0/30 deg.) ODU: Interface cable, 2 m.
YC0240, NARS-ST: 0.4 m cable, D15 female / ODU 8-pin male. Connects radio and NARS-1F (D15m / D9f) adapter.

USB Connectivity

YC0232: Data cable, RS232 ODU - USB-A (8pin ODU/USB-A), 1.8m.

Power Supply Options

YP1150: Power adapter (150W), ODU 2-pin male, C14 male IEC power inlet. Input: 100-240 Vac, Output: 12 Vdc/12.5A.
YC0904: Mains Cable C-M, compatible with CEE 7/7 (angle) and C13 female IEC connectors.
YP1224: DIN-rail mountable power supply, Input: 90-264 Vac, Output: 24 Vdc / 5 A.

Power Cables

YC2957: Power cable C-P-Pro+, 2 m, ODU 2-pin male / 4 mm lab plugs.
YC1353: Power cable, 2 m, ODU 2-pin male / alligator clip.

SATEL-EASy Pro+ Alternative Programming Setup with HW PROG

An alternative programming setup for the SATEL-EASy Pro+ using HW PROG involves the following components:

YC0240, NARS-ST: Interface adapter (8 pin LEMO male / D15 female).
NARS adapter (D9f-D15m): Compatible adapters include YC0204 (NARS-1F-4A), YC0200 (NARS-1F), and YC0210 (NARS-1F-4A-SC). Note: NARS adapter power wires are not connected in this setup.
YC0201, CRS-9: Direct serial interface cable (D9male / D9female).
YC2957: Power cable C-P-Pro+, 2 m, ODU 2-pin male / 4 mm lab plugs.

SATELLINE-3AS VHF Configuration Setup

The SATELLINE-3AS VHF radio modem requires specific cabling for its operation.

Power, Programming, and Interface Cables

RS232

YC0200, NARS-1F: Interface adapter with 900 mA fuse, 2 m power supply wires and programming switch (D15m / D9f).
YC0204, NARS-1F-4A: As NARS-1F, but with 4A fuse (D15m / D9f).
YC0210, NARS-1F-4A-SC: As NARS-1F-4A, but with 2.1 mm DC socket (D15m / D9f).
YC0201, CRS-9: Direct serial interface cable (D9male / D9female).
YC0203, CRS-9M: Direct serial interface cable, 2 m (D9m / D9m).
YC0104, CRS-2F: 2 m interface cable with 1 m power supply wires, 6.3 / 0.630 A fuse (D15m/D9f).
YC0103, CRS-2M: 2 m interface cable with 1 m power supply wires, 6.3 / 0.630 A fuse (D15m/D9m).

RS-485/422

YC0485, NARS-2: Interface adapter (D15m / screw connectors).
YC0501, CRS-PB: Interface cable (D15m / D9m).

NMS, RS232

YC0302, CRS-NMS: 1.5 m NMS/RS232 interface cable (D15m / 2 x D9f), with 1 m power supply wires and 6.3 / 0.630 A fuse.

Power Supply Options

YP1224: DIN-rail mountable power supply, Input: 90-264 Vac, Output: 24 Vdc / 5 A.
YP1240: AC adapter (40W), with a 2.1 mm DC jack. Input: 100-240 Vac, C14 male IEC power inlet. Output: 12 Vdc / 3.34 A.
YC0904: Mains Cable C-M, compatible with CEE 7/7 (angle) and C13 female IEC connectors.

	Testing a Modem Pair with SATEL Test-Kit A guide on how to test a modem pair using the SATEL Test-Kit, including equipment needed, device setup, and software configuration for both transmitting and receiving modems.
	SATEL Software Product Compatibility Table A compatibility table detailing SATEL software compatibility with various SATEL products, including current and discontinued models.
	SATEL Software Product Compatibility Table (Discontinued Products) A compatibility table for SATEL software products, detailing compatibility with various SATEL hardware devices and software solutions. This table includes discontinued products.
	SATEL-B2 Motherboard Quick Guide A quick guide for the SATEL-B2 Motherboard, detailing its features, assembly, and wiring for SATEL radio modules.
	SATEL-B2 Motherboard Assemblies: Technical Overview and Integration Detailed information on SATEL-B2 motherboard assemblies, including compatible radio modules, mechanical specifications, and connectivity options for building robust wireless data transfer networks.
	SATEL-B2 Motherboard/Radio Module Assemblies User Guide This user guide provides comprehensive information on the SATEL-B2 Motherboard and Radio Module Assemblies, including technical specifications, installation instructions, and safety guidelines. It covers various models like SATEL-B2-TR4+ and SATEL-B2-TR489, detailing their features, restrictions on use, and product conformity.
	SATELLINE-EASy, Compact-Proof, EASy-Proof Radio Modems User Guide Comprehensive user guide for SATEL's SATELLINE-EASy, SATELLINE-EASy 869, SATEL Compact-Proof, and SATEL EASy-Proof radio modems. Covers technical specifications, installation, operation, and safety instructions.
	Satel USB-RS Converter for SATEL Device Programming This document provides information on the Satel USB-RS converter, a device used for programming SATEL equipment with RS-232 or RS-232 (TTL) ports. It includes details on its features, connection, technical specifications, and driver installation.

SATEL Radio Modem Configuration and Cable Guide

SATEL-EASy+ Configuration Setup

Power, Programming, and Interface Cables (RS-232)

RS-485/422 Cables

NMS, RS232 Cables

Power Supply Options

SATEL-B2 Motherboard Configuration Setup

Power, Programming, and Interface Cables (RS-232)

Power Supply Options

SATEL MCCU-20 Configuration Setup

Power, Programming, and Interface Cables (RS-232)

Power Supply Options

SATEL-EASy Pro+ Configuration Setup

Power, Programming, and Interface Cables (RS-232)

USB Connectivity

Power Supply Options

Power Cables

SATEL-EASy Pro+ Alternative Programming Setup with HW PROG

SATELLINE-3AS VHF Configuration Setup

Power, Programming, and Interface Cables

RS232

RS-485/422

NMS, RS232

Power Supply Options

Related Documents