GE® 30" Built-In Single Wall Oven (JT3000SF)

Dimensions and Installation Information

Most 30" wall cabinets can be used with this unit.

Important Notes:

• These ovens are not approved for stackable installations.
• Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.
• The door handle protrudes 3" from the door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle.
• Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard-wired in accordance with installation instructions.

Installation Information: Before installing, consult installation instructions packed with the product for current dimensional data.

Side-by-side installations require at least 2" between cutouts.

Cabinet Cutout Dimensions:

• Cutout Width: 28-1/2" MIN. to 28-5/8" MAX.
• Cutout Height: 27-1/4" MIN. to 27-5/16" MAX.
• Recommended Cutout Location from Floor: 32-1/2"

Oven Overlap Dimensions:

• A – Overlap of oven at top of cutout: 1"
• B – Overlap of oven over side edges of cutout: 3/4"
• C – Overlap of oven at bottom of cutout: 1-1/4"

Oven Dimensions:

• D – Overall depth with handle: 27-3/16"
• E – Overall height with trim: 28-3/8"
• F – Overall width: 29-3/4"

Electrical Requirements:

Diagram Description:

A diagram illustrates the oven installation within a cabinet. It shows the required cutout dimensions, including width, height, and depth. It also details the overlap of the oven with the cabinet cutout edges (A, B, C) and provides overall oven dimensions (D, E, F). The diagram indicates the recommended location for the junction box and the minimum door opening allowance. It also shows the placement of support runners (2x4 or equivalent) which must be level with the bottom of the cutout and flush with the sides, or on a solid bottom floor. These supports must be able to hold at least 200 lbs.

Optional Undercounter Dimensions and Installation Information

Note: 36" ribbon cooktops are approved for use over GE 30" single wall ovens and warming drawers. 30" ribbon cooktops are approved for use over 30" and GE 27" single wall ovens and warming drawers. Refer to cooktop and wall oven installation information packed with products for current dimensional data.

Installation Information: Before installing, consult installation instructions packed with products for current dimensional data and for alternate installation options.

Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard-wired in accordance with installation instructions.

Diagram Description (Undercounter):

A diagram shows the installation of the oven under a countertop. It details the cutout dimensions (28 1/2" MIN. to 28 5/8" MAX. width, 27 1/4" MIN. to 27 5/16" MAX. height). It indicates the required 3/4" support platform that must support 200 lbs. The diagram also shows the placement of the junction box and specifies the minimum clearance above the support platform (22" MIN.). It notes that gas or electric connections for a gas cooktop must be located in an adjacent accessible location to the right. The typical countertop height is shown as 36".

Features and Benefits

• Self-Clean with Steam Clean Option: Clean your oven the way you want.
• Self-Clean Heavy-Duty Oven Racks: Conveniently clean your oven and racks together.
• Ten-Pass Bake Element: Even baking is assured with heat that covers more surface area.
• Eight-Pass Broil Element: Get full broil coverage and even browning from edge to edge.
• 5.0 cu. ft. Oven Capacity: Cook more dishes at once.
• Black Gloss Oven Interior: Enjoy a clean and sleek appearance.
• Electronic Touch Controls: Confidently operate the oven with one easy touch.
• Hidden Bake: Make cleanup easy by eliminating hard-to-reach areas.
• Audible Preheat Signal: Know when the oven is ready.
• Certified Sabbath Mode: Prepare foods by kosher standards.
• Model: JT3000SFSS - Stainless steel

Additional Information

The oven features electronic touch controls and a black gloss interior. The model JT3000SFSS is stainless steel.

Certifications: The product is ADA compliant and UL Listed.

For questions or assistance, visit geappliances.com or call the GE Answer Center® service at 800.626.2000.

Specification Created 2/13