Defend Water Resistant Wireless Speaker SP-0269 IM
Product: SP-0269 IM | Size: 451.7(w) x 100(h) mm
SKU: SP-0269 IM
Distributed by ZEEVA INT LTD
Product Overview
[Image: A detailed illustration of the Defend Water Resistant Wireless Speaker. The front shows a speaker grille. The top view shows buttons labeled 1 through 6. The back view shows a port area labeled 'OPEN' with a silicon seal cover, a rope attachment point labeled 9, and a USB Type-C port labeled 7. A separate detail shows the port area under the silicon seal cover, revealing the USB Type-C port (7) and charging indicator (8) with 'DC 5V' label.]
Key Components:
- 1. Volume Down / Previous Song Button
- 2. Volume Up / Next Song Button
- 3. Play / Pause Button
- 4. LED Indicator
- 5. Bluetooth / FM Radio Mode Button
- 6. On / Off Button
- 7. USB Type-C Charging Port
- 8. Charging Indicator
- 9. Rope
Package Contents
- 1x Defend Water Resistant Wireless Speaker
- 1x USB Type-C Charging Cable
- 1x Instruction Manual
Power On/Off
- Power on: Press and hold the Power Button (6) for 3 seconds.
- Power off: Press and hold the Power Button (6) for 3 seconds.
Note: Always power off the speaker when not in use.
Pair Wireless Speaker with Your Mobile Device
- Keep the distance between your wireless speaker and mobile phone (or other devices) within 32.8 Feet (10 meters).
- Power on the wireless speaker.
- Activate the Bluetooth function on your phone and select "SP-0269 SPK" from the list of available devices.
- You will hear a beep sound when pairing is successful.
Reconnect Wireless Speaker to Your Mobile Device
When powered on, the wireless speaker will automatically connect with the last successfully paired device.
Charging Your Wireless Speaker
⚠️ For your safety, please always use an appropriate 5V output charger/adapter to charge the product. DO NOT USE Quick Charging USB Adapters, as it might damage the product.
- Use the USB Type-C charging cable provided with this wireless speaker.
- Open the silicon seal cover on the back side of the speaker.
- Connect the USB Type-C plug to the speaker's USB Type-C charging port (7), then connect the USB plug to a wall adapter to begin charging.
- The Charging Indicator (8) will turn red while charging and will turn off once fully charged.
NOTE:
- You must select a qualified charger from a regular manufacturer.
- You must charge the Wireless speaker if it has not been used for more than 6 months.
[Image: A USB Type-C charging cable shown. One end is a USB Type-C plug, the other is a standard USB plug.]
CAUTION: The USB Type-C charging cable included with this item is intended for use with this product. Only use the included USB Type-C charging cable to charge this product. USB Type-C Charging Cable rating: 5V/1A Max.
Bluetooth Speaker Mode
- Play/Pause: Short press the Play/Pause Button (3) once.
- Next Track: Short press the "+" Button (2) once.
- Previous Track: Short press the "-" Button (1) once.
- Volume Up: Long press the "+" Button (2).
- Volume Down: Long press the "-" Button (1).
FM Radio Mode
NOTE: Plugging in the USB Type-C Charging Cable can enhance the FM sensitivity. However, this will disable the Water Protection. Only use in a dry condition.
- Switch to FM Radio Mode: Short press the "M" Button (5) once.
- Switch back to Bluetooth Speaker Mode: Short press the "M" Button (5) again.
- Auto Scan: Long press the Play/Pause Button (3).
- Next Channel: Short press the "+" Button (2) once.
- Previous Channel: Short press the "-" Button (1) once.
- Volume Up: Long press the "+" Button (2).
- Volume Down: Long press the "-" Button (1).
- Mute/Unmute: Short press the Play/Pause Button (3).
True Wireless Stereo (TWS) Mode
NOTE:
- Please purchase two pieces of Defend Water Resistant Wireless Speakers to perform TWS Mode.
- TWS mode is not supported in FM Radio mode.
- Turn on both wireless speakers.
- Disconnect both wireless speakers from any Bluetooth device.
- Keep both wireless speakers side by side.
- Press and hold the "M" Button (5) for 2 seconds on ONE of the wireless speakers. You will hear an alert sound.
- The wireless speaker will connect with the other wireless speaker in a few seconds. Both speakers will emit another alert sound upon successful connection.
- Now, follow the "Pair Wireless Speaker with Your Mobile Device" instructions to pair with your mobile device.
- To disable TWS mode, power off and then on both wireless speakers. Alternatively, press and hold the "M" Button (5) for 2 seconds on ONE of the wireless speakers. You will hear an alert sound, and they will disconnect.
Water Protection
The product is IPX5 Water-jet resistant rated. However, DO NOT immerse the unit in water, as it may cause product failure.
- For proper water protection, ensure the Water Resistance Plug is completely flush with the unit by pressing along the entire edge of the cover until it is completely and securely in place.
- Make sure the cover and surrounding surfaces are completely dry before opening the cover to prevent moisture from damaging the internal electronics.
- Keep the cover free of dirt, sand, or other objects that can interfere with proper sealing. If the cover is not making a tight waterproof seal, water may enter the unit.
- DO NOT clean the unit with oily soaps, chemicals, or solvents. Clean with a damp cloth.
Technical Specifications
| Specification | Details |
|---|---|
| Driver Diameter | 52 mm |
| Impedance | 3 Ohms |
| Power Supply | Li-ion Battery 3.7V 500 mAh |
| Playtime | 5 Hours |
| Charging Time | 2-2.5 Hours |
| Bluetooth Range | 32 Feet |
| Bluetooth Version | 5.3 |
| Charging Method | USB Type-C Charging |
| FM Radio Mode | Supported |
| Water Resistance | IPX5 Water Resistant |
FAQ
- If the Wireless speaker cannot be paired with your device:
- Ensure that your speaker is in pairing mode or reconnection mode.
- Ensure that your mobile device's Bluetooth search function is activated.
- If the Wireless speaker cannot be recharged:
- If you use a power outlet, ensure that the power supply is connected securely and the outlet works.
Safety Instructions for the Lithium Battery and Charging the Product
- The input voltage to the product is DC 5V 1A.
- In order to charge the product in safe and reliable conditions, please only use a certified appropriate charger/adapter for charging the product.
- Only charge the product at ambient temperatures between 10°C/50°F and 40°C/104°F.
- Do not heat above 70°C/158°F, e.g., do not expose to sunlight or throw into fire.
- Switch off the product after use.
- Please note that we will not take any responsibility for any wrong operation (e.g., voltage higher than 5V), as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user is using this product.
- In extreme cases, abuse or misuse of the Lithium battery pack can lead to explosion, heat generation, fire development, or smoke development.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or experienced radio/TV technician for help.
RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by 1616 Holdings, Inc. is under license. Other trademarks and trade names are those of their respective owners.
[FCC logo] FCC ID: 2ADM5-SP-0269
Product Information
ITEM#: SP-0269
Distributed by 1616 Holdings, Inc.
701 Market Street, Suite 200
Philadelphia, PA 19106
Made in China
Keep All Relevant Information For Future Reference
