BASS JAXX LED Lantern Speaker

Product Overview

Thank you for purchasing the LED Lantern Wireless Speaker. This manual provides more information about this wireless speaker; please read the instructions before using.

The product is a portable speaker with an integrated LED lantern. Key external features include:

• A Handle [?️] for carrying.
• A Power ON/OFF Button.
• An LED Indicator light [?].
• A Micro USB Charging Port [?] for power input.

Internal components, as depicted in a diagram, include the speaker driver and a lithium-ion battery.

Package Contents

• 1 x LED Lantern Speaker (Dimensions: 5.9in. x 9.84in. x 5.9in. / 15cm x 25cm x 15cm)
• 1 x Charging Cable (11.8in. / 30cm)
• 1 x Instruction Manual

Operation

Power On/Off

Power on: Press and hold the Power Button for 2 seconds.

Power off: Press and hold the Power Button for 2 seconds.

Note: Always power off the speaker when not in use.

Pair Wireless Speaker with Your Mobile Device

1. Keep the distance between your wireless speaker and mobile phone (or other devices) within 32.8 Feet.
2. Power on the wireless speaker.
3. Activate the Bluetooth function on your phone within range and select "BT LANTERN SPEAKER" from the list shown.
4. You will hear a beep sound when pairing is successful.

Reconnect Wireless Speaker to Your Mobile Device

When powered on, the wireless speaker will automatically connect with the last successfully paired device.

Charging Your Wireless Speaker

For your safety, please always use an appropriate 5V output charger/adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product.

1. Use the Micro USB charging cable provided with this wireless speaker.
2. Connect the Micro USB plug [?] to the Micro USB charging port [?] on the speaker, then connect the USB plug [?] to a USB port on a computer or wall adapter to begin charging.
3. The LED Indicator [?] will turn red while charging and will turn off once fully charged.

NOTE:

• You must select a qualified charger from a regular manufacturer.
• You must charge the Wireless speaker if it has been not used for more than 6 months.

LED Mode Change

Short press the Power Button to toggle between Flame LED and Color Changing LED modes.

Technical Specifications

FAQ

Q: If the Wireless speaker cannot be paired with your device?

A: Please try the following: Ensure that your speaker is in pairing mode or reconnection mode. Ensure that the Bluetooth search function of your mobile device is activated.

Q: If the Wireless speaker cannot be recharged?

A: If you use a power outlet, ensure that the power supply is connected securely and the outlet works. If you use a computer, ensure that it is connected and the USB port is powered.

Safety Instructions for Lithium Battery and Charging

• The input voltage to the product is DC 5V 1A.
• To charge the product safely and reliably, please only adopt certified appropriate charger/adapter.
• Only charge the product at ambient temperatures between 10°C/50°F and 40°C/104°F.
• Do not heat above 70°C/158°F, e.g., do not expose to sunlight or throw into fire.
• Switch off the product after use.
• The manufacturer is not responsible for any wrong operation (e.g., voltage higher than 5V) which may result in severe injury or loss of property.
• In extreme cases, abuse or misuse of the Lithium battery pack can lead to explosion, heat generation, fire development, or smoke development.

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC ID: 2ADM5-SP-0213

Class 1 LED product [?]

Product Information

ITEM# SP-0213

Distributed by 1616 Holdings, Inc., 701 Market Street, Suite 200, Philadelphia, PA 19106

Made in China