Signature Design by Ashley 5460438
Assembly Instructions and Safety Guide
Important Safety Notice
Please read the following safety instructions carefully before beginning assembly. This document was originally provided in multiple languages, including English, Spanish, French, and Chinese.
- Always use the proper tools for assembly.
- Follow the assembly steps in the order presented; do not skip any steps.
- Carefully check all packing materials for small parts that may have come loose during shipment. Contact the retailer if parts are missing; do not use substitute parts.
- Periodically check to ensure all connectors (bolts, screws, etc.) are tight.
- Keep these instructions for future reference.
- Handle glass or mirrors with extreme care, as severe injury may result if they break. Never handle large pieces of glass or mirrors alone.
- When assembling products with electrical cords (lamps, lights, etc.), always ensure the cord is unplugged before assembly and be careful not to twist the cord during assembly.
- When assembling shelves or entertainment centers, do not stand on lower shelves to assemble upper shelves; use a step ladder.
- Do not stand on tables, including end tables, coffee tables, and dining tables, as they are not designed to support the weight of a person.
- If assembly instructions state that two or more people are required, do not attempt assembly alone due to the risk of injury.
Disclaimer: Ashley Furniture Industries, LLC disclaims any liability for damages or injuries that may occur due to failure to properly follow assembly instructions, properly assemble the product, or properly use the product.
Note: The appearance of your unit may differ from the illustrations on this instruction sheet.
Parts List
The following parts are included in the box:
| Part ID | Quantity | Description |
|---|---|---|
| A | 1 | Base frame component |
| B | 1 | Left side panel with connection points |
| C | 1 | Right side panel with connection points |
| D | 1 | Back panel or support structure |
| E | 2 | Seat cushions |
| F | 2 | Furniture legs |
| G | 4 | Bolts or fasteners |
| H | 4 | Bolts or fasteners |
Assembly Instructions
Assembly requires two or more people. Do not tighten any bolts until all bolts have been started.
Step 1: Attach the left side panel (B) and the right side panel (C) to the base frame component (A). Insert bolts (G) through the designated holes in the side panels and into the corresponding receiving points on the base. Ensure all bolts are started before proceeding.
Visual Description: Diagrams show panels B and C being connected to panel A using bolts. Close-up insets illustrate the connection points.
Step 2: Connect the back panel or support structure (D) to the assembled base and side panels. Use bolts (G and H) to secure panel D to the frame.
Visual Description: Diagrams show panel D being attached to the main structure using bolts, with arrows indicating insertion.
Step 3: Secure the back panel/support (D) to the main frame. Ensure it is properly aligned and fastened.
Visual Description: An arrow indicates the placement of panel D onto the frame.
Step 4: Attach the backrest panel (D) to the main frame. Align the panel and secure it in place.
Visual Description: Arrows indicate the backrest panel being slid or fitted into its final position.
Step 5: Place the two seat cushions (E) onto the assembled sofa frame. Ensure they are positioned correctly.
Visual Description: Arrows show the seat cushions being placed onto the frame.
Step 6: The assembly is now complete. The final product is a fully assembled sofa.
Visual Description: An illustration of the finished sofa.
Contact and Support
For replacement parts or assistance, please contact:
- Email: RTAParts@ashleyfurniture.com
- Website: www.ashleyfurniture.parts
- Phone: 1-844-966-0809
