System Overview
The SunPower Equinox system is designed for efficient and reliable solar energy generation. This guide covers all necessary steps, from safety precautions to final system setup.
The system comprises the following key components:
- SunPower AC modules and accessories
- SunPower InvisiMount™ mounting system
- SunPower EnergyLink™ monitoring system
Safety First
Important Safety Instructions: All personnel involved in the installation must adhere to the safety procedures outlined in this document. Failure to comply can result in personal injury, equipment damage, or voiding the system warranty.
General Warnings: Avoid installation during adverse weather conditions. Only qualified and trained electricians or technicians should perform installation or service. Always use appropriate personal protective equipment (PPE), including insulating gloves, eye protection, and head protection.
Installation Process
The installation process involves several key stages:
- Preparation: Reviewing safety guidelines, understanding installer responsibilities, and gathering necessary tools and equipment.
- Mounting: Installing the InvisiMount™ system, including roof attachments, flashings, and rails.
- Module Installation: Attaching the SunPower AC modules to the rails and ensuring proper connections.
- Electrical Connections: Wiring the modules, installing the EnergyLink monitoring system, and connecting to the internet.
- Commissioning: Configuring and verifying the system's operation using the PVS Management App.
Refer to the specific sections within this guide for detailed procedures on each stage, including torque values for fasteners and component specifications.
Key Components and Tools
Essential components include AC modules, AC rail clips, disconnect tools, end caps, end clamps, extension cables, and flashing. Tools required range from standard electrical tools to specialized items like torque wrenches and cordless drills.
For detailed information on each component and its associated tools and torque values, please consult the relevant sections of this manual.
Compliance and Support
All installations must comply with applicable local codes, NEC, and relevant IEC standards. SunPower Equinox systems are designed to meet grid support and utility interactive requirements.
For design parameters and roof attachment validation, utilize the SunPower Design Tool or refer to the InvisiMount Span Tables document.
