Outsunny Potting Bench Assembly Instructions
Model: IN231000340V01_GL, 845-930V00
Assembly requires approximately 1 hour and involves 13 steps. Recommended for one person.
Parts List
- Part 1: Base Shelf x 1
- Part 2: Left Side Panel x 1
- Part 3: Right Side Panel x 1
- Part 4: Back Panel Slats x 2
- Part 5: Lower Support Rail x 1
- Part 6: Upper Support Rail x 1
- Part 7: Drawer Front x 1
- Part 8: Drawer Side x 1
- Part 9: Drawer Back x 1
- Part 10: Shelves x 2
- Part 11: Left Door x 1
- Part 12: Right Door x 1
- Part 13: Door Frame Upright x 1
- Part 14: Door Frame Crossbar x 1
- Part 15: Door Frame Crossbar x 1
- Part 16: Top Shelf/Countertop x 1
Hardware List
- Hardware A: M6*65 Screws x 4
- Hardware B: M6*45 Screws x 8 (+1 spare)
- Hardware C: M6*65 Screws x 4
- Hardware D: M4*30 Screws x 9 (+1 spare)
- Hardware E: M4*40 Screws x 4
- Hardware F1: Handle Attachment Screws x 2
- Hardware F2: M5*20 Screws x 4
- Hardware G1: Brackets x 4
- Hardware G2: M4*16 Screws x 24 (+1 spare)
- Hardware H: M3.5*25 Screws x 12 (+1 spare)
Note: Please do not confuse similar screws during assembly.
Assembly Instructions
Step 1
Attach the base shelf (Part 1) to the bottom of the left side panel (Part 2) using two A screws (M6*65).
Step 2
Attach the right side panel (Part 3) to the other end of the base shelf (Part 1) using two A screws (M6*65). Then, attach the first two back panel slats (Part 4) to the inner sides of the left and right side panels using four B screws (M6*45) per slat.
Step 3
Attach the remaining two back panel slats (Part 4) to the inner sides of the left and right side panels using four B screws (M6*45) per slat. The main frame is now formed.
Step 4
Attach the lower support rail (Part 5) to the front of the side panels, between the base and the first set of back slats, using three D screws (M4*30).
Step 5
Attach the upper support rail (Part 6) to the front of the side panels, above the back slats, using four C screws (M6*65).
Step 6
Place the top shelf/countertop (Part 16) onto the top of the side panels. Secure it using two E screws (M4*40) at the back and three D screws (M4*30) at the front.
Step 7
Assemble the drawer. Attach the drawer sides (Part 8) to the drawer back (Part 9) using three D screws (M4*30). Then, attach the drawer front (Part 7) to the drawer sides (Part 8) using two E screws (M4*40).
Step 8
Insert the two shelves (Part 10) into the pre-drilled slots on the inside of the side panels.
Step 9
Attach the left door (Part 11) and the right door (Part 12) to the cabinet frame. Secure the doors using four F1 screws (for handles, if applicable) and four F2 screws (M5*20).
Step 10
Further secure the doors to the cabinet frame by attaching them from the inside using twenty-four G2 screws (M4*16).
Step 11
Assemble the door frames by connecting the door frame crossbars (Parts 14 and 15) between the door frame uprights (Part 13) using four H screws (M3.5*25).
Step 12
Attach the assembled door frames to the main cabinet structure using four H screws (M3.5*25).
Customer Support and Contact Information
For any questions or assistance, please contact the relevant customer care center:
- USA/Canada: Aosom LLC / Aosom Canada Inc. | Phone: 001-877-644-9366 (US) / 416-792-6088 (CA) | Email: customerservice@aosom.com (US) / customerservice@aosom.ca (CA) | Address: 27150 SW Kinsman Rd Wilsonville, OR 97070 USA (US); 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9 (CA)
- United Kingdom: MH STAR UK LTD | Phone: 0044-800-240-4004 | Email: enquiries@mhstar.co.uk | Address: Unit 27, Perivale Park, Horsenden lane South, Perivale, UB6 7RH
- France: MH FRANCE | Phone: 0033-1-84166106 | Email: aosom@mhfrance.fr | Address: 2 Rue Maurice Hartmann, 92130 Issy Les Moulineaux, France
- Germany: MH Handel GmbH | Phone: 0049-0(40)-87408465 | Email: service@aosom.de | Address: Wendenstraße 309, D-20537 Hamburg, Germany
- Italy: AOSOM Italy srl | Phone: 0039-0249471447 | Email: clienti@aosom.it | Address: Centro Direzionale Milanofiori, Strada 1 Palazzo F1, 20057 Assago (MI)
- Spain/Portugal: SPANISH AOSOM, S.L. | Phone: 0034-931294512 | Email: atencioncliente@aosom.es (ES) / info@aosom.pt (PT) | Address: C/ROC GROS,N°15.08550, ELS HOSTALETS DE BALENYÀ, SPAIN.
All products are Made in China.
Recycling Information (France): Please refer to quefairedemesdechets.fr for disposal instructions.
