iRobot Roomba 860 Battery Replacement
This guide shows how to remove the battery from the iRobot Roomba 860 for battery replacement and safe further disassembly.
Written By: Ryan Murphy
Introduction
If your iRobot Roomba 860 Battery needs replacement or to safely further disassemble this product, this guide can help.
Tools
- Phillips #2 Screwdriver (1)
Step 1: Battery
Start by powering down the device to remove the battery from the iRobot Roomba 860.
Description of visual: A close-up view of hands working on the underside of an iRobot Roomba 860, with a green battery pack partially visible.
Step 2
Flip the Roomba over so that the underside is facing up.
Locate the battery panel and the 2 - 7 mm Phillips #2 Point Screws.
Using a Phillips #2 Point Screwdriver, remove the screws and use your fingers to pull the cover away from the device.
Description of visual: The iRobot Roomba 860 is flipped upside down. Two circular areas on the underside are highlighted, indicating the location of screws for the battery panel.
Description of visual: Hands using a Phillips #2 screwdriver to remove screws from the battery panel of the iRobot Roomba 860.
Step 3
Locate the two fabric tabs on the side of the battery.
Pull up on the tabs to easily remove the battery.
To reassemble your device, follow these instructions in reverse order.
Description of visual: Hands are shown pulling on two fabric tabs located on the side of the iRobot Roomba 860's battery to remove it.
