Tuya Beacon Fan With Light App Instructions

1.1. Download and Install App

Scan the QR code below or search SmartLife to download the SmartLife app. For first-time use, register and log in using your mobile phone number or email address.

1.2. Device Configuration and Control

1. Connect the device to the power supply and confirm it operates normally (the light turns on slowly).
2. Enter network mode: Power the device on and off continuously three times (power on for 2-3 seconds, power off for 5-10 seconds). The main light source will pulse to indicate it's in network mode.
3. Open the Smart Life App, tap "Add Device" in the upper right corner, and wait for the app to automatically search for peripheral devices.
4. After the app scans the device, tap "Add" to bind it.
5. Tap "Done" to enter the device control page.

The app interface guides users through device discovery. It shows a 'Searching for nearby devices' screen, prompting the user to ensure the device is in pairing mode. Upon successful detection, a list of available devices appears, with an 'Add' button next to each. After tapping 'Add' to bind the device, a confirmation screen states '1 device(s) added successfully'. The final control page allows users to select 'White' light, 'Colour', or 'Scene' modes. Brightness is adjustable via a slider, and colors can be chosen from a color wheel. Fan settings include mode selection (e.g., 'Fresh'), fan direction ('Turn: Forward'), fan speed (e.g., 'Level 6'), and toggles for 'Fan Beep' and 'Fan Shake'.

2. Remote Control Instructions

2.1. Pair Code

To pair the remote control: Connect the device to power and confirm normal operation. Turn the device off for 5-10 seconds, then turn it back on. Long press Button 1 on the remote until the device flashes 3 times quickly. The code pairing is successful, and the remote can now control the device.

2.2. Clear Code

To clear the remote control code: Connect the device to power and confirm normal operation. Turn the device off for 5-10 seconds, then turn it back on. Long press Button 1 on the remote until the device flashes 3 times quickly. The remote control code is cleared, and the remote will no longer control the device until it is re-paired.

2.3. Button Functions

The remote control features the following buttons:

• Button 1: Switch off all devices.
• Button 2: Fan mode. Short press to switch between natural air and comfort air modes (functionality may vary by model).
• Button 3: Fan direction. Short press to switch between forward and reverse rotation.
• Button 4: Fan rocker switch (supported by some models).
• Button 5: Fan switch. Short press to turn the fan on/off. Long press for 5 seconds to enter the app-assigned network mode.
• Button 6: Fan speed. Short press to cycle through 6 speed levels.
• Button 7: White light switch. Short press to turn the white light on/off.
• Button 8: Colored light switch. Short press to turn the colored light on/off.
• Button 9: Brightness control. Short press adjusts brightness in 10 levels. Long press adjusts brightness steplessly.
• Button 10: Temperature control. Short press adjusts temperature in 10 levels. Long press adjusts temperature steplessly.
• Button 11: Color static cycle. Cycles through static colors: red, yellow, green, blue, purple, white.
• Button 12: Color dynamic cycle. Activates dynamic color transitions.
• Button 13: Timer function. Sets a 1-hour or 4-hour countdown for the fan, white light, and colored light to turn off simultaneously.

The remote control diagram displays buttons numbered 1 through 13. Button 1 is the primary power button. Buttons 2 and 3 control fan mode and direction, respectively. Button 4 is a rocker switch. Button 5 controls the fan's on/off state and network mode activation. Button 6 adjusts fan speed across six levels. Buttons 7 and 8 manage the white and colored lights. Buttons 9 and 10 offer brightness and temperature adjustments, with short presses for discrete levels and long presses for continuous adjustment. Buttons 11 and 12 cycle through static and dynamic color modes. Button 13 functions as a timer, setting a 1 or 4-hour countdown for all functions to turn off.

Safety and Disposal Information

Safety Notice

Before installation, turn off the power supply. Do not cover the lamp or obstruct heat dissipation. Do not use the product in damp areas (e.g., bathrooms). Keep children away from this product. Do not disassemble or repair without authorization.

Disposal Information

This product is Waste Electrical and Electronic Equipment (WEEE). Do not dispose of it with household waste. Please return it to a recycling station or a designated collection point for electronic waste that complies with local regulations. Proper disposal helps protect the environment and prevents contamination from potentially harmful substances.