MTD 775r 2-Cycle Gas Trimmer Parts

Part Number Prefix: 41CD775B034

Engine Parts

A detailed schematic illustration of the engine components for the 775r 2-cycle gas trimmer. The diagram displays various parts with numerical callouts, including the air cleaner/muffler cover, carburetor assembly, fuel tank, starter housing, clutch assembly, cylinder, piston, and muffler.

Item	Part No.	Description	Item	Part No.	Description
1	791-182059	Air Cleaner/Muffler Cover Assembly (includes 2 & 40)	33	791-613103	Rope
2	791-180350	Air Cleaner Filter	34	791-181797	Starter Housing Assembly (includes 27-39 & 34)
3	791-180351	Carburetor Mounting Screw Assembly	35	791-181862	Housing Screw
4	791-180226	Wavey Washer	36	791-182396	Clutch Washer
5	791-182061	Choke Lever Assembly (includes 6)	37	791-181445	Clutch Rotor Assembly (includes 35)
6	791-182070	Choke Knob and Screw	38	791-153592	Clutch Drum Assembly
7	791-182060	Choke Lever and Plate (includes 5)	39	791-182797	Clutch Cover Assembly (includes 39)
8	753-04106	Carburetor Assembly (includes 9 & 20)	40	791-181345	Screw
9	791-610675	Carburetor Gasket	41	791-182519	Anti-Rotation Screw
10	791-181860	Carb Mount Screw	42	791-180036	Wire Lead
11	791-181558	Primer and Hose Assembly	43	791-1937	Module Assembly
12	753-1196	Carb Mount Assembly (includes 10 & 13)	44	791-610311	Spark Plug
13	791-684451	Reed Assembly	45	791-182066	Muffler Assembly (includes 47-49)
14	753-1208	Carburetor Mount Gasket	46	791-182747	Spark Arrestor Screen
15	791-182791	Crank Case Service Assembly (includes 10 & 23)	47	753-04159	Exhaust Gasket
16	791-612134	Rear Mounting Pad	48	791-147575	Muffler Mounting Bolt
17	791-182399	Fuel Tank Assembly (includes 18-20)	49	753-1206	Cylinder Assembly (includes 52)
18	791-182438	Fuel Cap Assembly	50	753-1207	Piston and Rod Assembly
19	791-181168	Fuel Return Line	51	753-1197	Cylinder Gasket
20	791-682039	Fuel Line Assembly	52	791-182723	Cylinder Bolt
21	791-145308	Front Mounting Pad	53	791-612468	Spring
22	791-153520	Shroud Assembly	*	753-04134	Engine Gasket Kit
23	791-181861	Shroud Screw	*	791-180090	O.E.M. Carburetor Repair Kit
24	791-182064	Shroud Extension and Stand	*	791-180091	Gasket Diaphragm Repair Kit
25	791-182736	Flywheel Assembly	*	753-1209	Piston Ring
26	791-181065	Spacer	*	753-1210	Short Block Assembly (includes 10, 15, 23, 44, 48-51)
27	753-04232	Recoil Pulley Assembly	*	791-181599	Clutch Springs (Qty. 2)
28	791-613102	Recoil Spring			Items Not Shown
29	791-611061	Rope Guide
30	791-181441	Pulley Retainer Assembly
31	791-181442	Switch Assembly
32	791-181079	Pull Handle

Boom and Trimmer Parts

A detailed schematic illustration of the boom and trimmer head components for the 775r 2-cycle gas trimmer. The diagram shows parts such as the throttle housing, drive shafts, handle assembly, gearbox, shield, blade assembly, and spool, with numerical callouts.

Item	Part No.	Description	Item	Part No.	Description
1	791-182808	Throttle Housing Assembly (includes 2 & 3)	27	791-180548	Shield and Blade Assembly (includes 28)
2	791-610314	Throttle Trigger Spring	28	791-180553	Blade Assembly
3	791-182385	Throttle Trigger	29	791-181457	Outer Spool Assembly (includes 30)
4	791-182068	Throttle Cable	30	791-181458	Retainer
5	791-182309	Upper Drive Shaft Housing Assembly	31	791-15161	Thrust Washer
6	791-180687	J-Handle Assembly (includes 7 & 8)	32	791-181459	Small Spring
7	791-612831	Grip	33	753-04257	Slider
8	791-612021	Tube Closure	34	791-181532	E-Clip
9	791-683295	Handle Bracket Assembly (includes 10-15)	35	791-181531	Spring
10	791-181811	Screw	36	791-181462	Plunger
11	791-181812	Upper Handle Clamp	37	791-181463	C-Clip
12	791-181813	Middle Handle Clamp	38	791-181464	Inner Reel
13	791-181814	Lower Handle Clamp	39	791-181465	Large Spring
14	791-181815	Nut	40	791-181467	Foam Seal
15	791-145569	Anti-Rotation Screw	41	791-181468	Bump Knob Assembly (includes 39 & 40)
16	791-181616	Click-Link Coupler (includes 17-20)			Optional Accessories
17	791-182057	Screw	*	791-181472	Replacement Line, 0.80 Diameter (8 ft, 10 ft lengths)
18	791-181617	Bolt	*	753-04221	Reel and Line Assembly
19	791-181618	Adjustment Knob	*	791-682075	Shoulder Strap Assembly
20	791-181886	Knob Retaining Nut			Items Not Shown
21	753-1212	Lower Drive Shaft Housing Assembly
22	791-181166	Lower Flexible Drive Shaft
23	791-153597	Lower Clamp Assembly (includes 24)
24	791-145569	Anti-Rotation Screw
25	791-181566	Gearbox Assembly
26	791-180547	Shield Mounting Hardware

	MTD TB32 EC 2-Cycle Trimmer Replacement Parts Guide Comprehensive replacement parts list and diagram descriptions for the MTD TB32 EC 2-Cycle Trimmer (Model 41BDZ32C766). Find part numbers and descriptions for engine, handle, drive shaft, and cutting head components.
	MTD TBP6040 4-Cycle Gas Trimmer Replacement Parts List Comprehensive replacement parts list and diagrams for the MTD TBP6040 4-Cycle Gas Trimmer. This document details all components, including engine parts, drive shafts, cutting head assemblies, and accessories, with corresponding part numbers for easy identification and ordering.
	MTD YM20CS 2-Cycle Gas Trimmer Replacement Parts Detailed replacement parts list and diagrams for the MTD YM20CS 2-Cycle Gas Trimmer, including part numbers and descriptions for engine components, drive shafts, and accessories.
	MTD 825r 4-Cycle Gas Trimmer Parts List and Diagrams Comprehensive parts list and exploded view diagrams for the MTD 825r 4-Cycle Gas Trimmer (PPN: 41AD825A034). Includes detailed part numbers and descriptions for engine, boom, and trimmer head components.
	MTD TB90BC 2-Cycle Gas Trimmer/Brushcutter Parts List and Diagrams Comprehensive parts list and exploded diagrams for the MTD TB90BC 2-cycle gas trimmer and brushcutter. This document details engine and boom/trimmer components with part numbers and descriptions, sourced from MTD documentation.
	MTD Model 790r 2-Cycle Gas Trimmer/Brushcutter Engine and Gearbox Parts List Comprehensive parts list and diagrams for the MTD Model 790r 2-cycle gas trimmer/brushcutter, detailing engine and gearbox components with part numbers and descriptions.
	MTD 700r 2-Cycle Gas Trimmer Parts List and Diagrams Detailed parts list and diagrams for the MTD 700r 2-cycle gas trimmer, including engine and boom/trimmer components.
	MTD TB475SS 4-Cycle Gas Trimmer Parts Diagram and List Comprehensive parts list and exploded diagrams for the MTD TB475SS 4-Cycle Gas Trimmer, essential for identification, maintenance, and repair of engine and boom components.

Engine Parts

Boom and Trimmer Parts

Related Documents