Battery Cam BFA30 Quick Guide

What's in the box

Please consult this checklist for all parts:

• Camera
• USB cable
• Bracket
• Accessories kit
• Manual

Description

The camera unit includes the following components:

• Speaker
• Lens
• PIR Sensor
• Microphone
• SD card slot (Micro SD)
• Micro USB port
• Reset button
• Power on/off button

Component Details:

Power Port: DC 5V±10%

Power on/off: Press the button for 3 seconds to turn on/off the camera.

Status light:

• Red light solid: The camera network is abnormal.
• Red light blinking: Awaiting WiFi connection, or currently connecting (faster blinking).
• Blue light solid: Camera is running correctly.

SD card slot: Supports local SD Card storage (Max. 128GB). It is recommended to plug in or remove the SD card after power cut. Confirm the SD card is normally available and formatted as FAT32. Use the provided tool to remove the SD card.

Reset: Press and hold for 5 seconds to reset the camera.

Battery capacity: 10000mAh (Two 21700 lithium-ion batteries).

Install

Mode: Bracket Installation

1. Fix the bracket on the wall.
2. Install the camera in the bracket and lock it with the screw.

After adjusting your camera angle, please lock the angle adjustment screw.

Connect

Download the App

CloudEdge is available for both iOS and Android OS. Search for 'CloudEdge' in the App Store or Android Market, or scan the provided QR code (Note: QR codes are excluded from this output) to download the App.

Add Device

Log in to the CloudEdge app, select "Add Device", and add the smart camera to the app. Follow the on-screen tips. Keep the smart camera close to your router during configuration.

Note: If you need to re-select the WiFi network, press and hold the "RESET" button for 5 seconds. The device will restart, and the indicator will be flashing red.

FAQ

Q: The device cannot be previewed properly?

A: Check if the network is normal. Try placing the camera closer to the router. If issues persist, reset the device and add it again.

Q: Why is it still in the list of devices after resetting?

A: Resetting the device only resets its network configuration. It does not remove it from the app. You must manually remove the camera from the app.

Q: How to connect the camera to another router?

A: First, remove and reset the device in the app. Then, reconfigure the device with the new router settings through the app.

Q: Why doesn't the device identify the SD card?

A: It is recommended to insert the SD card after powering off the device. Ensure the SD card is functional and formatted as FAT32. Poor network conditions may also prevent identification.

Q: Why am I not receiving notifications on my mobile app?

A: Ensure the CloudEdge app is running on your phone and that notification functions are enabled within the app. Also, check that message notifications and authority confirmations are enabled in your phone's system settings.

Functions

• Remote wake-up: The camera enters a sleep mode to save power. You can wake it up for a preview in the app.
• Full-duplex audio: Allows two-way communication; you can see and hear visitors through the camera via the app.
• PIR (Motion Detection): When motion is detected, the camera sends an alarm message to your cell phone.
• Low battery alarm: The app sends a notification when the battery power drops below a set threshold.
• Record: Supports recording using an SD card or an optional Cloud Storage Service to save footage.
• Day & Night (Night Vision): Provides clear vision in complete darkness.

Warning

Safety precautions:

1. The camera with a built-in battery must not be exposed to fire to prevent explosion.
2. Do not drop the camera or subject it to strong impacts.
3. Avoid placing the camera in humid, dusty, extremely hot, extremely cold environments, or areas with strong electromagnetic radiation.
4. Do not immerse the camera in water.
5. Do not disassemble the product without authorization.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Use only the supplied antenna.