Whirlpool W8I HP42 L UK Built-In Dishwasher Installation Guide

Overview and Dimensions

This guide details the installation process for the Whirlpool W8I HP42 L UK built-in dishwasher. Proper adherence to dimensions and clearances is crucial for correct installation and operation.

Cabinet Requirements:

• Height: 820 mm to 900 mm
• Minimum Width: 600 mm
• Minimum Depth: 560 mm

Appliance Dimensions:

• Height: 598 mm
• Width: 594 mm
• Depth: 540 mm

The top surface of the appliance can support a maximum weight of 10 kg.

Required Tools and Parts

Tools:

• Screwdrivers (various types, labeled a, b, c) [screwdriver]
• Pliers [pliers]
• Spirit Level [spirit-level]

Fasteners and Components:

• Screws: 4x Ø4x38 mm (labeled g)
• Screws: 2x Ø4x25 mm (labeled f)
• Screws: 4x Ø3.5x18 mm (labeled i)
• Bracket (labeled e)
• Other fasteners and components as indicated in diagrams.

Installation Steps

Step 1: Preparation and Initial Assembly

Diagrams show the appliance and cabinet, with key dimensions highlighted (e.g., 598 mm, 594 mm). Initial assembly may involve attaching components using screws (a, b, c).

Step 2: Securing Components and Frame

Diagrams illustrate attaching internal brackets (e) using screws (b) and securing the appliance frame to the cabinet structure using screws (a). Step 2B shows a detailed view of frame attachment.

Step 3: Height Adjustment

The appliance height is adjusted using leveling feet. Diagrams show the adjustment process, typically by rotating the feet (labeled 'b' in some views) to achieve a level and stable position.

Step 4: Cabinet Integration

Diagrams show the dishwasher being placed and secured within a cabinet or under a counter. Dashed lines indicate the surrounding cabinet structure. Fasteners are used to fix the appliance in place.

Step 5: Integration with Furniture

Diagram 3 shows the dishwasher integrating with a desk unit, potentially requiring screws (h) for secure attachment to the furniture.

Step 6: Drawer/Panel Insertion

Diagram 6 illustrates the insertion of a drawer or front panel into the appliance, guided by runners or tracks.

Step 7: Clearance Checks

Diagram 7 shows specific measurements being taken to ensure correct clearances around the appliance, likely for ventilation or door opening.

Step 8: Final Securing and Alignment

Diagram 8 provides detailed views of final securing points, using screws (c) and other fasteners. Arrows indicate adjustments for precise alignment with the cabinet.

Step 9a & 9b: Door Panel Attachment

These steps detail the process of attaching the main front door panel to the appliance. This typically involves hinges and securing with screws (b, i), with diagrams showing different angles and methods.

Connections and Safety

Water Supply:

• Connect the water inlet hose securely.
• Water pressure requirements: Minimum 0.05 MPa (0.5 Bar), Maximum 1 MPa (10 Bar).

Drainage:

• Connect the drain hose to the appropriate outlet.
• Ensure a minimum clearance of 25 mm for the drain hose connection point.
• Proper routing of the drain hose is essential to prevent siphoning or backflow.

Electrical Connection:

• Connect the appliance to a grounded electrical outlet that meets the specified voltage and current requirements.
• Refer to the appliance's rating plate for detailed electrical specifications.

Hose Lengths:

• The supplied water inlet and drain hoses have approximate lengths of 1300 mm and 1500 mm respectively. Ensure these lengths are sufficient for the installation location.

Safety Precautions:

Diagram 10 highlights several safety warnings using 'X' symbols [cross]. These indicate prohibited actions or incorrect connection methods that must be avoided to ensure safe operation and prevent damage.