Harman Kardon SoundSticks 4 Quick Start Guide

1. What's in the Box

This section details the components included with your Harman Kardon SoundSticks 4. The package typically contains:

• One central subwoofer unit
• Two satellite speakers
• Power cord (quantity and plug type may vary by region)

Diagram Description: The diagram shows the central subwoofer unit and the two satellite speakers, along with the power cord.

2. Buttons

The central subwoofer unit features controls for operation.

Front View:

The front of the subwoofer unit features a central circular area, likely for touch controls or display.

Back View:

The back of the subwoofer unit houses the main controls:

• Power button [?]
• Bluetooth pairing button [?]
• Volume up/down buttons
• Other function buttons (e.g., AUX input)

3. Connections

Connect your SoundSticks 4 system as follows:

• Connect the two satellite speakers to the subwoofer unit using the provided audio cables.
• Connect the power cord to the subwoofer and then to a power outlet.

Diagram Description: The diagram illustrates connecting the audio cables from the satellite speakers to the corresponding ports on the subwoofer, and plugging in the power cord.

4. Bluetooth® Pairing

To connect wirelessly via Bluetooth:

1. Ensure the SoundSticks 4 are powered on.
2. On your device (smartphone, tablet, etc.), enable Bluetooth.
3. Select "HK SoundStick 4" from the list of available devices.
4. Follow any on-screen prompts to complete the pairing.

Diagram Description: The diagram shows a smartphone displaying a Bluetooth connection prompt, with the Harman Kardon SoundSticks 4 as the target device.

5. Technical Specifications

• Transducers: 1.4" full range x 8, 5.25" subwoofer x 1
• Rated Output Power: 2 x 20 W RMS + 1 x 100 W RMS
• Power Input: 100 – 240 V ~ 50/60 Hz
• Frequency Response: 40 Hz – 20 kHz
• Signal-to-Noise Ratio: 80 dB
• Bluetooth® Version: 4.2
• Bluetooth® Profile: A2DP 1.3, AVRCP 1.6
• Bluetooth® Transmitter Frequency Range: 2.402 – 2.480 GHz
• Bluetooth® Transmitter Power: 0 - 9 dBm
• Bluetooth® Transmitter Modulation: GFSK, π/4 DQPSK, 8DPSK
• Dimensions (W x H x D): Woofer: 231 mm x 276 mm x 231 mm; Satellite: 84 mm x 271 mm x 84 mm
• Weight: 4.432 kg

Important Safety Instructions

Please read and follow all safety instructions carefully.

For all products:

• Read and keep these instructions.
• Heed all warnings and follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block ventilation openings. Install according to manufacturer's instructions.
• Avoid heat sources like radiators or stoves.
• Do not defeat the safety purpose of polarized or grounding-type plugs.
• Protect the power cord from being walked on or pinched.
• Use only manufacturer-specified attachments/accessories.
• Use with a cart, stand, tripod, bracket, or table only if specified by the manufacturer. Use caution when moving cart/apparatus combinations.
• Unplug during lightning storms or when unused for long periods.
• Refer servicing to qualified personnel. Servicing is required for damage to the power cord, plug, spilled liquids, objects falling into the apparatus, exposure to rain or moisture, abnormal operation, or dropping.
• Do not expose to dripping or splashing; do not place liquid-filled objects on the apparatus.
• To disconnect from AC mains, disconnect the power-supply cord plug from the AC receptacle. The plug must remain readily operable.
• Do not expose batteries to excessive heat (sunshine, fire).
• Use only with the provided power supply and/or charging cable.

Caution: Risk of Electric Shock. Do not open.

Diagram Description: A lightning flash symbol within an equilateral triangle indicates the presence of uninsulated "dangerous voltage" that may pose a risk of electric shock. An exclamation point within an equilateral triangle indicates important operating and maintenance instructions.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

FCC and IC Statement (USA and Canada):

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3(B)/NMB-3(B).

FCC SDOC Supplier's Declaration of Conformity: HARMAN International declares compliance with FCC Part 15 Subpart B. Declaration available at www.harmankardon.com.

Federal Communication Commission Interference Statement: This equipment complies with FCC Part 15 limits for Class B digital devices. It generates, uses, and can radiate radio frequency energy. If it causes radio or television reception interference, try reorienting/relocating the antenna, increasing separation, connecting to a different outlet, or consulting a dealer/technician. Changes not expressly approved by HARMAN could void user authority.

For Products That Transmit RF Energy:

This device complies with FCC Part 15 rules and Industry Canada license-exempt RSS standard(s). Operation is subject to two conditions: (1) no harmful interference, and (2) acceptance of received interference. FCC/IC Radiation Exposure Statement: Complies with FCC/IC RSS-102 limits for uncontrolled environments.

For Wi-Fi 5G device FCC Caution: High power radars are primary users of 5.25-5.35 GHz and 5.65-5.85 GHz bands. No configuration controls are provided for frequency changes outside FCC authorization.

IC Caution: Devices in the 5150-5250 MHz band are for indoor use only. Maximum antenna gain limits apply for 5250-5350 MHz, 5470-5725 MHz, and 5725-5825 MHz bands. High-power radars may cause interference/damage to LE-LAN devices.

Exposure of humans to RF fields (RSS-102):

Antennas do not emit RF fields exceeding Health Canada limits for the general population. SAR tests are conducted using recommended operating positions. Non-compliance may violate FCC RF exposure guidelines.

Use Restriction (France):

Operation in France is limited to indoor use within the 5150-5350 MHz band.

For Products with Radio Receivers That Can Use an External Antenna (USA ONLY):

CATV (Cable TV) or Antenna Grounding: Section 810 of the National Electrical Code (NEC) provides information on proper grounding of masts, lead-in wires, and grounding electrodes to protect against voltage surges and static charges.

Note to CATV System Installer: Connect cable ground to the building's grounding system near the point of cable entry.

For CD/DVD/Blu-ray Disc™ Players:

Caution: This product uses a laser system. Do not open the cabinet or defeat safety mechanisms. Do not stare into the laser beam. Read the owner's manual for proper use and retain for future use. Refer servicing to qualified personnel.

Diagram Description: "CLASS 1 LASER PRODUCT" is indicated, along with various language translations for this classification.

For All EU COUNTRIES:

Prevention of hearing loss: Caution: Permanent hearing loss may occur if earphones or headphones are used at high volume for prolonged periods. For France, products comply with Sound Pressure Level requirements (NF EN 50332-1:2013 and/or EN 50332-2:2013).

WEEE Notice:

The WEEE Directive (2014/30/EU) promotes waste prevention, reuse, recycling, and recovery of electrical equipment. The WEEE logo (crossed-out wheeled bin) indicates separate collection for electrical and electronic equipment. Dispose of waste equipment at designated collection points to conserve resources and protect health/environment. Contact local authorities for disposal information.

RoHS Compliance:

This product complies with Directive 2011/65/EU and (EU)2015/863 on the restriction of hazardous substances in electrical and electronic equipment. It contains lead (CAS-No. 7439-92-1) above 0.1% per weight, as per REACH regulations.

For Products That Include Batteries:

EU Batteries Directive 2013/56/EU: This directive governs batteries and accumulators. For products with built-in batteries, removal may require authorized service centers. Dispose of batteries in an environmentally sound manner; do not mix with household trash. Contact local waste-management officials.

Diagram Description: Symbols for Mercury (Hg), Cadmium (Cd), and Lead (Pb) are shown, indicating their presence in batteries if concentrations exceed specified limits.

WARNING: Danger of explosion if battery is incorrectly replaced. Do not disassemble, crush, puncture, short external contacts, expose to high temperatures, or dispose of in fire or water. Replace only with specified batteries. The symbol indicating 'separate collection' for batteries is the crossed-out wheeled bin.

WARNING: DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD. This product may contain a coin/button cell battery. If swallowed, it can cause severe internal burns and death. Keep batteries away from children. If the battery compartment is not secure, stop using the product.

Compliance and Warranty

For All Products Except Those with Wireless Operation: HARMAN International declares compliance with EMC 2014/30/EU and LVD 2014/35/EU Directives. Declaration available at www.harmankardon.com.

For All Products with Wireless Operation: HARMAN International declares compliance with essential requirements of Directive 2014/53/EU. Declaration available at www.harmankardon.com.

HARMAN International Industries, Incorporated. Harman Kardon is a trademark of HARMAN International Industries, Incorporated. Features, specifications, and appearance are subject to change without notice.

Manufacturer Information: HARMAN International Industries, Incorporated, 8500 Balboa Boulevard, Northridge, CA 91329 USA. Phone: 516.255.4545 (USA only).

Warranty Information: This product is covered by a Limited Warranty, typically for one year from the date of retail purchase. The warranty covers defects in workmanship and materials. It does not cover damage from accident, misuse, neglect, shipment, unauthorized repairs, or normal wear and tear (e.g., batteries). To obtain warranty service, contact the dealer or Harman Kardon customer support. Proof of purchase is required. Unauthorized repairs void the warranty.

For detailed warranty terms and conditions, please refer to the specific warranty information provided with your product or visit the Harman Kardon support website.