Product Description
A diagram showing the Phomemo printer from two angles. The front view indicates the 'Paper Exit' and 'Power button'. The side view shows the 'Paper Exit', 'Power button', 'USB interface', and 'Open cover switch'.
Power Indicator Status
- Light is steady: Standby/charging completed
- Slow flashing: Charging
- Fast flashing (first instance): Fault: out of paper/overheating
- Fast flashing (second instance): Low battery
- Light is off: Shut down/charging completed (While the printer is off)
Battery Warning Description
- Never disassemble, impact, squeeze, or put into fire.
- If there is severe swelling, do not continue to use.
- Do not put in a high temperature environment.
- Do not use if immersed in water.
- Be sure to replace with an appropriate type of battery. (There is danger of explosion if you replace it with the wrong type of battery.)
- Be sure to dispose of the used battery as instructed.
Operation Guidance
Fully charge the battery before using the first time. Turn on the machine by pressing and holding the power button for 3 seconds.
A diagram illustrating the Phomemo printer with a power button symbol and a finger pressing it, indicating to press and hold the power button.
Search for Phomemo and download the App.
A diagram showing a smartphone screen with 'Download on the App Store' and 'GET IT ON Google Play' buttons, and a search bar displaying 'Search for Phomemo'.
Turn on Bluetooth, search for the device in the App, and connect.
A diagram showing the Phomemo printer with a Bluetooth symbol, indicating Bluetooth connection.
Paper Replacement
Replace the paper by pushing the switch on the printer to open the cover.
A diagram showing the Phomemo printer with an arrow pointing to a switch, indicating to push the switch to open the cover.
Take out the adjustable plate. Open the adjustable plate slightly, install the paper roll in the plate, and close it.
A diagram illustrating the adjustable plate being taken out, then slightly opened to install a paper roll, and finally closed with the paper roll inside.
Place the paper roll into the printer and straighten the paper as shown in the diagram.
A diagram showing the Phomemo printer with the cover open, and a paper roll being placed inside with the paper straightened.
Attention
- Insert or pull out the charge cable gently to avoid any damages to the port.
- Pull out the cable after charging is complete.
- Do not charge or use the printer in high temperature, high humidity, or foggy circumstances (e.g., in a bathroom, a steam room, or beside fire) which may be dangerous. (NOTE: This machine is not suitable for tropical environments)
- Improper charging methods may cause damages to the print head.
- Do not touch the print head in case of high temperature.
- Be aware of the sharp blade.
- If the operation of the printer fails, the printer can be reset by gently inserting the reset hole.
Phomemo Official Consumables Types
- Plain paper: With image retention up to 7 or 10 years.
- Color paper: Includes yellow, pink, and blue paper with image retention up to 5 years.
- Sticker Paper: With sticky glue, with image retention up to 10 years.
- Sticky Note: With back glue, can be pasted and taken off at any time.
- Continuous label paper: With sticky glue, with no fixed size, can freely set the printing length.
*The paper roll is the special paper for the Phomemo.
*The guarantee policies cannot be enjoyed if the Phomemo failure is produced because the paper roll is not used.
Phomemo Thermal Labels & Stickers | Compatible Shipping Label Paper
