Mitsubishi Electric SVZ-AP48NL & SUZ-AK48NLHZ
48,000 BTU/H DUCTED AIR HANDLER INDOOR UNIT
48,000 BTU/H HYPER HEAT PUMP OUTDOOR UNIT
Product Overview
This document provides detailed specifications for the Mitsubishi Electric SVZ-AP48NL Ducted Air Handler Indoor Unit and the SUZ-AK48NLHZ Hyper Heat Pump Outdoor Unit. These units are designed for efficient and powerful climate control.
Indoor Unit Features (SVZ-AP48NL)
- Unique blow-through design for simple coil cleaning.
- Selectable external static pressure: 0.30, 0.50, and 0.80 in.WG with 3 fan speeds.
- Positive pressure cabinet with air leakage less than 1.0% at 1.0 in.WG.
- Optional humidifier control and ERV control.
- Optional electric heat kit for additional heat capacity.
- Multiple control options, including a comfort app, third-party interfaces, and wired/wireless controllers.
- Multi-zone capability for managing temperature across multiple zones.
- Multi-position installation: horizontal (left or right), vertical (up or down). CMA-1 recommended for downflow configurations to manage condensate.
- Fiberglass-free insulation (1 inch R4.2) to reduce condensation and improve efficiency.
- Enclosed ECM motor for high efficiency.
- Ducted air handler design for cooling and heating large zones.
Outdoor Unit Features (SUZ-AK48NLHZ)
- Blue Fin Coating: Anti-corrosion treatment on aluminum fins for protection against salt, sulfur, and airborne contaminants.
- Built-in base pan heater.
- Hot-Start Technology: Prevents cold air blasts during start-up by activating the fan only when the heat exchanger is warm.
- Hyper-Heating INVERTER® (H2i®): Provides 100% heating capacity down to 5°F and guaranteed heating down to -13°F.
- Joint Lap DC Motor: Ensures high efficiency and reliability.
- Outdoor unit directed power: Automatically restarts the system after a power outage.
- Pulse Amplitude Modulation technology: Enhances energy efficiency by optimizing compressor performance.
- Quiet operation: Designed for low sound levels.
Specifications
Cooling at 95°F
| Parameter | Value |
| Maximum Capacity | 52,000 Btu/h |
| Rated Capacity | 48,000 Btu/h |
| Minimum Capacity | 18,000 Btu/h |
| Maximum Power Input | 4,310 W |
| Rated Power Input | 4,640 W |
| Moisture Removal | 11.9 Pints/h |
| Sensible Heat Factor | 0.75 |
| Power Factor [208V/230V] | 93%/93% |
Heating at 47°F
| Parameter | Value |
| Maximum Capacity | 60,000 Btu/h |
| Rated Capacity | 60,000 Btu/h |
| Minimum Capacity | 12,800 Btu/h |
| Maximum Power Input | 5,170 W |
| Rated Power Input | 5,170 W |
| Power Factor [208V/230V] | 94%/94% |
Heating at 17°F
| Parameter | Value |
| Maximum Capacity | 52,000 Btu/h |
| Rated Capacity | 30,800 Btu/h |
| Maximum Power Input | 6,130 W |
| Rated Power Input | 3,760 W |
Heating at 5°F
| Parameter | Value |
| Maximum Capacity | 52,000 Btu/h |
| Maximum Power Input | 7,940 W |
Heating at -13°F
| Parameter | Value |
| Maximum Capacity | 24,732 Btu/h |
Efficiency
| Parameter | Value |
| SEER2 | 18.1 |
| EER2¹ | 9.4 |
| HSPF2 [IV] | 8.5 |
| COP at 47°F² | 3.4 |
| COP at 17°F at Maximum Capacity³ | 2.48 |
| COP at 5°F at Maximum Capacity⁴ | 1.9 |
| COP at -13°F at Maximum Capacity⁵ | 1.12 |
| ENERGY STAR® Certified | No |
Electrical
| Parameter | Value |
| Voltage, Phase, Frequency | 208/230, 1, 60 VAC, Ø, Hz |
| Guaranteed Voltage Range | 198-253 VAC |
| Voltage: Indoor - Outdoor, S1-S2 | 208/230 VAC |
| Voltage: Indoor - Outdoor, S2-S3 | 12-24 V DC |
| Short-circuit Current Rating [SCCR] | 5 kA |
| Recommended Fuse/Breaker Size (Outdoor) | 40 A |
| Recommended Wire Size [Indoor - Outdoor] | 14 AWG |
| MCA | 3.9 A |
Indoor Unit
| Parameter | Value |
| Fan Motor Output | 430 W |
| Airflow Rate at Cooling, Dry | 1,040, 1,262, 1,485 CFM |
| Airflow Rate at Cooling, Wet | 1,040, 1,262, 1,485 CFM |
| Airflow Rate at Heating, Dry | 1,040, 1,262, 1,485 CFM |
| Sound Pressure Level [Cooling] | 45, 48, 52 dB (A) |
| Sound Pressure Level [Heating] | 45, 48, 52 dB (A) |
| External Static Pressure | 0.30, 0.50, 0.80 in.WG |
| Drain Pipe Size O.D. | 3/4 [19.05] inch [mm] |
| External Finish Color | 6.2PB 9/0.9 |
| Unit Dimensions (W x D x H) | 25 x 21-5/8 x 59-1/2 [635 x 548 x 1,511] inch x inch x inch [mm x mm x mm] |
| Package Dimensions (W x D x H) | 26 x 28-3/4 x 66 [660 x 730 x 1,675] inch x inch x inch [mm x mm x mm] |
| Unit Weight | 172 [78] lbs [kg] |
| Package Weight | 198 [90] lbs [kg] |
| Fan Motor Type | DC Motor |
| IDU Operating Temp. Range | 90, 73/66, 59 °FDB, °FWB / °FDB, °FWB |
Outdoor Unit
| Parameter | Value |
| MCA | 35 A |
| MOCP | 60 A |
| Fan Motor Output | 213+213 W |
| Airflow Rate Cooling | 4,020 CFM |
| Airflow Rate Heating | 4,020 CFM |
| Defrost Method | Reverse Cycle |
| Coating on Heat Exchanger (Bluefin, Sea Coast) | Yes, Yes |
| Sound Pressure Level, Cooling¹ | 60 dB (A) |
| Sound Pressure Level, Heating² | 62 dB (A) |
| Compressor Type | Twin Rotary |
| Compressor Model | MRK53FFJMC-L |
| Compressor Oil [Type // Charge] | RM68EH // 60 oz |
| External Finish Color | Munsell 3Y 7.8/1.1 |
| Base Pan Heater | Not applicable |
| Unit Dimensions (W x D x H) | 41-11/32 x 14 x 52-43/64 [1,050 x 355 x 1,338] inch x inch x inch [mm x mm x mm] |
| Package Dimensions (W x D x H) | 42-15/16 x 17-3/4 x 58-5/16 [1,090 x 450 x 1,480] inch x inch x inch [mm x mm x mm] |
| Unit Weight | 271 [123] lbs [kg] |
| Package Weight | 291 [135] lbs [kg] |
| ODU Operating Temp. Range | 115/23 °FDB |
| Cooling Intake Air Temp [Maximum / Minimum*] | 70, 59/-13 °FDB, °FWB / °FDB, °FWB |
| Heating Intake Air Temp [Maximum / Minimum] | -22/-13 °FDB |
| Heating Thermal Lock-out / Re-start Temperatures** | R454B |
| Pre-Charged Refrigerant Amount | 11.7 lbs, oz |
| Refrigerant | R454B |
| Maximum Pre-Charged Piping Length | 100 [30] ft [m] |
| Additional Refrigerant Charge Per Additional Piping Length | 0.6 oz/ft |
| Gas Pipe Size O.D. [Flared] | 5/8 [15.88] inch [mm] |
| Liquid Pipe Size O.D. [Flared] | 3/8 [9.52] inch [mm] |
| Maximum Piping Length | 245 [75] ft [m] |
| Maximum Height Difference | 100 [30] ft [m] |
| Maximum Number of Bends | 15 |
Indoor Unit Accessories
| Category | Description | Model Number |
| Condensate | Blue Diamond Advanced Mini Condensate Pump w Reservoir Sensor 208230V recommended | X87-721 |
| Condensate | Blue Diamond MaxiBlue Advanced Mini Condensate Pump w Reservoir Sensor 110V up to 48000 BTUH recommended | X87-711 |
| Condensate | Blue Diamond MegaBlue Advanced Condensate Pump w Reservoir Sensor | X87-835 |
| Condensate | Blue Diamond Sensor Extension Cable 15 Ft | C13-103 |
| Condensate | Sauermann Condensate Pump | S130-230 |
| Control Wire | 202PR 1PR shielded 1PR plenum wire for Airzone 100 ft reel | CW2042S2-100 |
| Control Wire | 202PR shielded 1PR plenum wire for Airzone 500 ft reel | CW2042S2-500 |
| Lineset | 10 x 3/8 x 10 x 5/8 Lineset Twin-Tube Insulation | MPLS385812T-10 |
| Lineset | 100 x 3/8 x 65 x 5/8 Lineset Twin-Tube Insulation | MPLS385812T-100 |
| Lineset | 15 x 3/8 x 15 x 5/8 Lineset Twin-Tube Insulation | MPLS385812T-15 |
| Lineset | 30 x 3/8 x 30 x 5/8 Lineset Twin-Tube Insulation | MPLS385812T-30 |
| Lineset | 50 x 3/8 x 50 x 5/8 Lineset Twin-Tube Insulation | MPLS385812T-50 |
| Lineset | 65 x 3/8 x 65 x 5/8 Lineset Twin-Tube Insulation | MPLS385812T-65 |
| Electric Heat Lockout | Airzone Wired Blueface Controller Black | ETC-211020-MIT |
| Electric Heat Lockout | Airzone Wired Blueface Controller White | AZZBSBLUEZEROCN |
| Electric Heat Lockout | Airzone Wired Lite Controller White | AZZBSBLUEZEROCB |
| Control Interface | Airzone Wireless Lite Controller White | AZZBSLITECB |
| Control Interface | Airzone Wireless Think Controller Black | AZZBSLITERB |
| Control Interface | Airzone Wireless Think Controller White | AZZBSTHINKRN |
| Control Interface | IT Extender for kumo station | AZZBSTHINKRB |
| Control Interface | kumo station for the Comfort app | PAC-WHS01IE-E |
| Electric Kit Heats | Operation and Error Status Output Adapter¹ | PAC-WHS01HC-E |
| Electric Kit Heats | Procon BACnet and Modbus Interface | PAC-SF40RM-E |
| Electric Kit Heats | Thermostat Interface for 3rd Party Thermostats | PAC-UKPRC001-CN-1 |
| Electric Kit Heats | Wireless Interface Adapter for the Comfort app | PAC-US445CN-1 |
| Electric Kit Heats | 10kW Electric Heater | PAC-USWHS002-WF-2 |
| Electric Kit Heats | 15kW Electric Heater | EH10-MPA-LB |
| Electric Kit Heats | 17kW Electric Heater | EH15-MPAS-LB |
| Disconnect Switch | 30A600VUL fits 2 X 4 utility box - Black | EH17-MPAS-LB |
| Disconnect Switch | 30A600VUL fits 2 X 4 utility box - White | TAZ-MS303 |
| Downflow Kit | Condensate Management Kit for downflow installation | TAZ-MS303W |
| Wired Remote Controller | Deluxe Wired MA Remote Controller | CMA-1 |
| Wired Remote Controller | Simple Direct Wired Remote Controller | PAR-42MAAUB |
| Wired Remote Controller | Simple MA Remote Controller | PAC-SDW01RC-1 |
| Wired Remote Controller | Touch MA Wired Remote Controller | PAC-YT53CRAU-J |
| Remote Sensor | Flush Mount Remote Temperature Sensor for SEZ SLZ SVZ and all P-Series models | PAR-CT01MAU-SB |
| Remote Sensor | Wall Mount Remote Temperature Sensor | PAC-USSEN002-FM-1 |
| Power Supplies & Auxiliary Components | Wireless temperature and humidity sensor for the Comfort app | PAC-SE41TS-E |
| Power Supplies & Auxiliary Components | 3-Pin Wiring Harness | PAC-USWHS003-TH-1 |
| Power Supplies & Auxiliary Components | 5-Pin Wiring Harness | PAC-715AD |
| Wireless Remote Controller | ERV On/Off Input Adapter for CNER on SVZ PEAD and PVA models | PAC-725AD |
| Power Supplies and Auxiliary Components | Lockdown Bracket for Wireless Handheld Remote Controllers | PAC-740 |
| Power Supplies and Auxiliary Components | RedLINK Wireless Remote Controller | RCMKP1CB |
| Power Supplies and Auxiliary Components | Universal Wireless MA Handheld Remote Controller | MHK2 |
| Power Supplies and Auxiliary Components | Universal Wireless Receiver for PAR-FL32MA-E | PAR-FL32MA-E |
| Terminal Block | Backup Heat Relay Kit Adapter for CN24 or CN152 Connector | PAR-FA32MA-W |
| Terminal Block | Separate Terminal Power Block | CN24RELAY-KIT-CM3 |
| Terminal Block | Terminal Block | SPTB1 |
Outdoor Unit Accessories
| Category | Description | Model Number |
| Control/Service Tool | M- & P-Series Maintenance Tool Cable Set | PAC-SK52ST |
| Control/Service Tool | Maintenance Tool Interface | M21EC0397 |
| Mini-Split Wire | 14 Gauge 4 wire Armored MiniSplit Cable250 ft roll | PAC-USCMS-MN-1 |
| Mini-Split Wire | 14 Gauge 4 wire Armored MiniSplit Cable50 ft roll | SW144-250 |
| Mini-Split Wire | 14 Gauge 4 wire MiniSplit Cable250 ft roll | SW144-50 |
| Mini-Split Wire | 14 Gauge 4 wire MiniSplit Cable50 ft roll | S144-250 |
| Mini-Split Wire | 3-Pin Wiring Harness | S144-50 |
| Power Supplies & Auxiliary Components | 5-Pin Wiring Harness | PAC-715AD |
| Power Supplies & Auxiliary Components | Centralized Drain Pan | PAC-725AD |
| Centralized Drain Pan | Centralized Drain Pan | PAC-SH97DP-E |
| Stand | 18 Dual Fan Stand | QSMS1802M |
| Stand | 24 Dual Fan Stand | QSMS2402M |
| Wind Baffle | Condenser Wall Bracket - Stainless Steel Finish | QSWBSS |
| Wind Baffle | Condenser Wall Bracket | QSWB2000M-1 |
| Drain Socket | Outdoor Unit 3-14 inch Mounting Base Pair - Plastic | DSD-400P |
| Hail Guards | Outdoor Unit Stand 12 High | QSMS1202M |
| Hail Guards | Front Wind Baffle | WB-PA3 (two pieces are required) |
| Snow/Rain Diverter | Drain Socket | PAC-SG61DS-E |
| Snow/Rain Diverter | Hail Guard | HG-A2 |
| Snow/Rain Diverter | SnowRain Diverter | SRD-5 |
| M-NET Converter | M-Net Interface for P-Series | PAC-SJ95MA-E |
| Air Outlet Guide | Air Outlet Guide 1 Piece | PAC-SH96SG-E (two pieces are required) |
| Mounting Pad | Condensing Unit Mounting Pad 24 x 42 x 3 | ULTRILITE2 |
Indoor Unit Dimensions (SVZ-AP48NL)
Diagram showing dimensions for the SVZ-AP48NL indoor unit. Key dimensions include:
- Unit Dimensions (W x D x H): 635 x 548 x 1,511 mm (25 x 21-5/8 x 59-1/2 inches)
- Nominal Filter Size: 508 x 609.6 x 25.4 mm (20 x 24 x 1 inches)
- Duct Connection: 579 x 402 mm (22-13/16 x 15-7/8 inches)
- Gas Pipe: 15.88 mm (5/8 inch)
- Liquid Pipe: 9.52 mm (3/8 inch)
Outdoor Unit Dimensions (SUZ-AK48NLHZ)
Diagram showing dimensions and installation considerations for the SUZ-AK48NLHZ outdoor unit. Key dimensions and notes include:
- Unit Dimensions (W x D x H): 1,050 x 355 x 1,338 mm (41-11/32 x 14 x 52-43/64 inches)
- Package Dimensions (W x D x H): 1,090 x 450 x 1,480 mm (42-15/16 x 17-3/4 x 58-5/16 inches)
- Service Space: Minimum clearances required for service access are indicated.
- Foundation Bolts: Requires M10 (3/8 inch) bolts for secure mounting.
- Piping-Wiring Directions: Connections can be made from front, right, rear, and below.
- Refrigerant Pipe Connections: Gas pipe (15.88 mm / 5/8F) and Liquid pipe (9.52 mm / 3/8F) flare connections.
- Conduit holes and piping knock-out details are provided.
