Wahoo ELEMNT GPS Bike Computer

Set Up Bike Computer

Follow these steps to set up your Wahoo ELEMNT GPS Bike Computer:

1. Download the App: Download the Wahoo ELEMNT Companion App. Ensure your device's Bluetooth ⚙️ is turned on.
2. Turn on ELEMNT: Hold the left-side button to power the device on or off.
3. Pair with Phone: Scan the QR code displayed on the ELEMNT with the app to pair your phone. If the QR code is not visible, press the left-side menu button and select "Pair Phone".
4. Follow App Instructions: Connect to Wi-Fi, authorize other applications, complete your personal data form, and link your social media and/or email accounts as prompted by the app.
5. Update Firmware: Update the device's firmware if prompted by the app.

Diagram Description: The setup process is illustrated with visuals showing the companion app download screen (with App Store and Google Play badges), the ELEMNT device displaying a QR code, a phone screen scanning the QR code, the ELEMNT app interface showing connection status and prompts for Wi-Fi, app authorization, personal data, and firmware updates.

Pair Sensors

Connect your sensors to the ELEMNT:

1. Navigate to Menu: Turn on the ELEMNT and go to the Menu by pressing the top left button.
2. Add Sensor: Select "Add Sensor".
3. Activate and Position Sensor: Activate your sensor and hold it close to the ELEMNT. Shake the sensor to make its LED lights blink. Note: The LEDs will turn off after 30 seconds to conserve battery power.
4. Save Sensor: Save the detected sensor.

Diagram Description: This section shows the ELEMNT device's menu with the "ADD SENSOR" option highlighted. It then depicts a sensor being held near the ELEMNT, with its LED lights blinking, followed by a confirmation screen indicating the sensor has been saved.

Mount to Bike

Choose your preferred mounting method:

• Option 1: Out-Front Mount
  Compatible with 31.8mm handlebars. Use a 2.5mm Allen wrench [Allen Wrench] to securely attach the mount to your handlebars.
• Option 2: Stem Mount
  Use the included zip ties [Zip Ties] to attach the mount to your bike's stem.
• Option 3: Aero Mount
  Use a 3mm Allen wrench [Allen Wrench] to securely attach the mount to aero bars.

Diagram Description: The diagram illustrates three distinct mounting options for the ELEMNT device: an out-front mount attached to handlebars, a stem mount secured with zip ties, and an aero mount attached to aero bars.

Button Functionality

Understand the functions of the ELEMNT's buttons:

1. Menu: Hold the power button to turn the device on or off.
2. Smart Buttons: These buttons change their function based on the currently displayed screen.
3. Page Over: Press to advance to the next page or screen.
4. Scroll Up and Down: Use these buttons to navigate through menus and options.

Diagram Description: The diagram shows the ELEMNT device with its buttons clearly labeled and numbered, corresponding to their functions described in the text.

More Information

For more detailed instructions and advanced features, visit:

wahoofitness.com/instructions

Here you can learn how to:

• Customize workout pages
• Set up LEDs and sounds
• Add a route to your device
• Get turn-by-turn navigation instructions
• Set up Strava live segments
• Get planned workouts on your device
• And much more!