Amazfit T-Rex User Manual

Safety Precautions

• Read this manual before first use.
• Keep your wrist stable when measuring heart rate.
• The watch has enhanced water resistance but is not waterproof. It can be worn in the shower, pool, or for swimming in shallow water. It cannot be used in a sauna or for diving. Warranty does not cover liquid damage.
• The touchscreen is not functional when the watch is wet. After contact with water, use a soft dry cloth to clean excess water from the surface before use.
• Do not overtighten the watch on your wrist during daily use and keep the contact area dry. Regularly clean the watch and strap with a damp cloth. If redness or swelling appears on the skin in the contact area, discontinue use immediately and seek medical attention.

Package Contents

• 1x Amazfit T-Rex
• 1x Strap
• 1x Charging Dock

Device Description

1. Up, 2. Down, 3. Power/Select, 4. Back, 5. Heart Rate Sensor, 6. Charging Contacts

Specifications

AMAZFIT T-REX

• Weight: 58 g
• Dial Diameter: 46 mm
• Display: AMOLED 1.3" | 360 x 360 px | Always-On
• Compatibility: Android 5.0 / iOS 10.0 or newer
• Battery: Li-Pol 390 mAh
• Charging: 5 V @ 500 mA
• Operating Temperature: 0 to 45 °C
• Water Resistance: 5 ATM
• Connectivity: Bluetooth 5.0, BLE
• Location Services: GPS + Glonass
• Frequency Band: 2 402 - 2 480 MHz
• Maximum Radio Frequency Power (EIRP): 10 dBm

Intended Use

The Amazfit smartwatch is used for tracking daily activities such as step counting, heart rate monitoring, sleep tracking, etc.

Wearing the Watch

Tighten the watch around your wrist, leaving enough space for one finger between your palm and the watch. Wearing the watch too loosely can negatively affect heart rate recording.

Maintenance

Do not use any chemical agents or running water for cleaning. Wipe dirt from the device, strap, and charging contacts with a dry or slightly damp cloth designed for cleaning electronics.

Zepp App

Download the Zepp app from the app store or scan the QR code located after the 'Pairing with Smartphone' chapter. A simple graphical guide will walk you through the pairing process, installation, and all necessary steps.

Pairing with Smartphone

• Keep the watch close to your smartphone during pairing.
• Ensure Bluetooth is enabled on your smartphone.
• Open the Amazfit app and log in with your preferred account or register a new one.
• Select 'Pair' and follow the app's instructions.
• Once the successful Bluetooth connection notification appears, press the button or touch the display to complete the pairing process.

Using the Watch

• After the watch successfully connects, it will start tracking and analyzing daily activities and sleep.
• Touch the display or press the button to light up the screen and show the home screen.
• Swipe up or down on the display to browse activity data, measure heart rate, and access many other functions.
• Swipe left or right on the screen to switch the display between different menu items.

*The Amazfit app and watch software are continuously updated; their functions, appearance, and names may change, and the manufacturer reserves the right to make these updates and changes without prior notice.

Charging

Exclusively use the original USB charging cable or the original charging dock. Connect the charging dock to any USB charger using the USB cable, and connect it to the back of the watch for charging. For charging to begin, the contacts on the charging dock must precisely touch the contacts on the watch.

EU Declaration of Conformity

Anhui Huami Information Technology Co., Ltd. hereby declares that the radio equipment type A1919 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.wittytrade.cz/shoda

Product Disposal

The product and electronic accessories (e.g., charger, headphones, USB cable, battery) should not be disposed of with regular household waste.

Manufacturer

Anhui Huami Information Technology Co., Ltd., No. 800 Wangjiang West Road, Anhui, China.