Onn. Rugged Speaker Quick Start Guide

What's in the Box?

Check to make sure you have everything below:

• 1. Onn. Rugged Speaker
• 2. Strap
• 3. Quick Start Guide
• 4. Charging Cable

Get to Know Your Rugged Speaker

Top:

• 1. Power
• 2. Volume-/Previous track
• 3. Light
• 4. Play/Pause/Speakerphone

Back:

• 5. Bluetooth
• 6. Volume+/Next track
• 7. Input charging port
• 8. Output charging port
• 9. Aux in

Controls:

• Power: Long press to power on/off the speaker.
• Play/Pause/Speakerphone: Short press to play and pause.
• Volume-/Previous track: Short press to reduce volume. Long press to play the previous song.
• Volume+/Next track: Short press to increase volume. Long press to play the next song.

Power & Bluetooth® Connection

In Bluetooth mode, activate the Bluetooth function on your device and search Bluetooth devices, then select "onn. Rugged LG GRY" to start connecting.

Play Music

Use your mobile device to pair with the master speaker utilizing the Bluetooth pairing method.

Aux Input

Use a 3.5mm cable (not included) to connect the speaker to another audio source. Press Play on the device and adjust the volume on the speaker to obtain the desired volume.

Answer Calls

• Short press to answer an incoming call, press again to hang up the call.
• Long press to reject an incoming call.

Party Sync Mode

Power on one speaker and hold the Bluetooth button for 3 seconds to enter pairing mode. This device will be the master. The second device will connect automatically to the master when turned on.

After the two speakers are paired together, use your mobile device to pair with the master speaker utilizing the Bluetooth pairing method.

Waterproof

IPX7 waterproof, can work well in up to 3 feet of water for 30 minutes without any connection.

FCC Information

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Rating Label is located at the bottom of the product.

Party sync mode compatible model list

Support

Need help? We're here for you every day 7 a.m. - 9 p.m. CST. Give us a call! 1-888-516-2630

We'd love to hear from you. Scan with your Walmart app and let us know what you think.