Manuals+

SENCO F-35FRHXP Cordless Framing Nailer

Parts Reference Guide

[warning] DANGER

The Fusion tool is charged with compressed air in a sealed chamber. Prior to any service or repair, release the charge of pressurized air. The pressurized air must be released prior to service. Major components such as the piston/driver assembly, gearbox, piston stop and guide body are all part of the drive assembly. Deliberate tampering with the drive assembly may result in the release of the driver. Any repair or upgrade requiring access to the pressure chamber may be handled by an authorized Senco dealer or service center.

PELIGRO: La herramienta Fusion se carga con aire comprimido en una cámara sellada. Antes de cualquier servicio o reparación, libere la carga de aire presurizado. El aire presurizado debe liberarse antes del servicio. Los componentes principales, como el conjunto de pistón / impulsor, la caja de engranajes, el tope del pistón y el cuerpo de guía son parte del conjunto de accionamiento. La manipulación deliberada del conjunto de la unidad puede provocar la liberación del percusor. Cualquier reparación o actualización que requiera acceso a la cámara de presión puede ser manejada por un distribuidor o centro de servicio autorizado de Senco.

DANGER: L'outil Fusion est chargé d'air comprimé dans une chambre étanche. Avant tout entretien ou réparation, déchargez la charge d'air sous pression. L'air sous pression doit être libéré avant l'entretien. Les principaux composants tels que l'ensemble piston / entraînement, la boîte de vitesses, la butée de piston et le corps de guidage font tous partie de l'ensemble d'entraînement. Une altération délibérée de l'ensemble de lecteur peut entraîner la libération du pilote. Toute réparation ou mise à niveau nécessitant un accès à la chambre de pression peut être prise en charge par un revendeur ou un centre de service Senco agréé.

Contact Information

KYOCERA SENCO Industrial Tools

4270 Ivy Pointe Blvd.
Cincinnati, OH 45245

Phone: 1-800-543-4596

Website: www.senco.com

For questions or comments, call SENCO's toll-free Action-Line: 1-800-543-4596 (North and South America Only) or email: toolprof@senco.com

Document ID: NFD010H • January 7, 2021 (Replaces 9/14/20)

© 2020 by Senco Brands, Inc.

Major Assemblies

This section provides an overview of the major assemblies of the SENCO F-35FRHXP Cordless Framing Nailer, illustrated with diagrams and accompanied by part number listings.

Diagrams and Part Listings

The following diagrams show key assemblies and their constituent parts. Tables provide the part number (PART NO. / PARTE NO. / N° DE PIÈCE) and its description in English, Spanish, and French. Descriptions are merged into a single English column.

Rafter Hanger Assembly (AA0283)

Diagram shows the rafter hanger component.

Body Assembly (AA0287)

Diagram shows the main body housing of the nailer.

Battery Charger (VB0189)

Diagram shows the battery charger unit.

Battery (VB0190)

Diagram shows the battery pack.

Front Plate Assembly (FA0366)

Diagram shows the front plate assembly.

Feed System (GA0774)

Diagram shows the nail feeding mechanism.

Electrical Assembly (VA0122)

Diagram shows the electrical components and wiring harness.

Gearbox Assembly (WA0072)

Diagram shows the gearbox mechanism.

Mechanical Assembly (WA0079)

Diagram shows various mechanical parts.

Part No. Description
AA0283Rafter Hanger Assembly
AA0287Body Assembly
FA0366Front Plate Assembly
GA0774Feed System
VA0122Electrical Assembly
WA0072Gearbox Assembly
WA0079Mechanical Assembly
VB0189Charger
VB0190Battery

Body Assembly

This section illustrates the components of the Body Assembly for the SENCO F-35FRHXP Cordless Framing Nailer. The diagram shows an exploded view of the main housing, including the left and right body halves, a cap, a detent for the rafter hanger, and various adapters and retainers. Screws are also depicted.

Part No. Description
AA0286Door Assembly
AB0268Cap
AB0267Detent, Rafter Hanger
AC0641Adapter, Nut
AC0642Retainer, Nut
AF0124Left Body Assembly
AF0128Right Body Assembly
KD0397Screw
KD0404Screw

Mechanical Assembly

This section details the Mechanical Assembly of the SENCO F-35FRHXP Cordless Framing Nailer. The diagram displays an exploded view of various mechanical components, including the pressure vessel, retainers, sleeve, piston stop, plug, driver assembly, and chassis assembly. Several screws, washers, seals, and O-rings are also listed.

Part No. Description
AB0269Pressure Vessel
BC0967Retainer, Upper
BC0968Retainer, Lower
BC0969Sleeve
BC0970Sleeve Retainer
BC0971Piston Stop
CC0322Plug
EA0415Driver Assembly
FA0367Chassis-Assembly
KD0366Screw
KD0391Screw
KD0392Washer
KD0393Screw
LB5171Seal
LB5173O-Ring
LB5174O-Ring
LB5175Seal

Chassis Assembly

This section covers the Chassis Assembly for the SENCO F-35FRHXP Cordless Framing Nailer. The diagram shows the chassis structure with associated components, including a fill assembly and a solenoid. Part numbers and descriptions are provided.

Part No. Description
CA0185Fill Assembly
VA0121Solenoid

Feed System

This section details the Feed System of the SENCO F-35FRHXP Cordless Framing Nailer. The diagram illustrates the nail feeding mechanism, including components like the backplate, carriage assembly, magazine sub-assembly, bracket, wear rail, latch, and various screws, springs, and washers.

Part No. Description
FC1049Backplate
GA0775Carriage Assembly
GA0776Magazine Sub-Assembly
GB0647Bracket
GB0648Wear Rail
GC1790Hex Wrench
GC1791Washer
GC1810Latch
GC1811C-Tube
GC1812Wear Insert
KD0367Screw
KD0400Screw
KD0413Spring
KD0414Ring (Retaining)
KD0415Screw
KD0416Pin
KD0417Nut
GC1797Feed Spring

Extended Feed System (Optional)

This section describes the optional Extended Feed System for the SENCO F-35FRHXP Cordless Framing Nailer. The diagram shows the components of this extended system, including parts similar to the standard feed system but with additional elements for extended functionality. It lists backplate, carriage assembly, magazine sub-assembly, bracket, wear rail, latch, wear insert, C-tube, and fasteners.

Part No. Description
FC1049Backplate
GA0775Carriage Assembly
GA0777Magazine Sub-Assembly
GB0647Bracket
GB0650Wear Rail
GC1810Latch
GC1813Wear Insert
GC1814C-Tube
GC1790Hex Wrench
GC1791Washer
KD0413Spring
KD0414Ring (Retaining)
KD0416Pin
KD0417Nut
KD0415Screw
KD0367Screw
KD0400Screw
GC1797Feed Spring

Front Plate Assembly

This section details the Front Plate Assembly of the SENCO F-35FRHXP Cordless Framing Nailer. The diagram shows the front plate and its associated components, including an extension assembly, adjustable safety clip, standoff tube, boot, and various screws, springs, washers, and an O-ring.

Part No. Description
FA0368Front Plate
HA0334Extension Assembly
HA0341Adjustable Safety
HC0819Clip
HC0824Standoff Tube
HF0127Boot
KD0369Screw, and Lockwasher
KD0372Screw
KD0383Spring
KD0384Screw
KD0385Screw
KD0387Pin
KD0388Washer
LB5169O-Ring

Fill Assembly

This section describes the Fill Assembly for the SENCO F-35FRHXP Cordless Framing Nailer, which includes the air filter and fill cover.

Part No. Description
CC0323Air Filter
CC0324Fill Cover

Hanger Assembly

This section details the Hanger Assembly for the SENCO F-35FRHXP Cordless Framing Nailer, consisting of a hanger hook, hook ring, and screw.

Part No. Description
AC0637Hanger Hook
AC0640Hook Ring
KD0362Screw

Gearbox Assembly

This section covers the Gearbox Assembly of the SENCO F-35FRHXP Cordless Framing Nailer. The diagram shows the gearbox housing and its internal components, including screws, seals, and pins.

Part No. Description
KD0394Screw
WC0245Housing
WC0254Seal
WC0255Pin

Piston and Driver Assembly

This section details the Piston and Driver Assembly for the SENCO F-35FRHXP Cordless Framing Nailer. The diagram illustrates the piston and driver shaft components, along with associated bearings and seals.

Part No. Description
BC0972Bearing
LB5176Seal

Electrical Assembly

This section describes the Electrical Assembly of the SENCO F-35FRHXP Cordless Framing Nailer. The diagram shows the electronic components, wiring harness, and associated brackets, including the retainer nut, on-off toggle switch, screws, O-ring, solenoid assembly, and panels.

Part No. Description
AC0642Retainer, Nut
AF0126On-Off Toggle
KD0372Screw
KD0381Screw
KD0406Screw
LB5168O-Ring
VA0121Solenoid Assembly
VC0133Bracket
VC0134Panel
VC0135Bracket
VC0136Bracket

Solenoid Assembly

This section details the Solenoid Assembly for the SENCO F-35FRHXP Cordless Framing Nailer, including the spring, nut, bracket, and the solenoid and plunger unit.

Part No. Description
KD0408Spring
KD0409Nut
VC0140Bracket
VC0141Solenoid and Plunger

Trigger Assembly

This section describes the Trigger Assembly of the SENCO F-35FRHXP Cordless Framing Nailer, consisting of a spring and the trigger component.

Part No. Description
KD0407Spring
HC0826Trigger

Notes

This section is provided for user notes and remarks.

Models: FUSION, SENCO, Cordless, Framing, Nailer, F-35FRHXP

File Info : application/pdf, 16 Pages, 3.57MB

PDF preview unavailable. Download the PDF instead.

f35frhxp parts chart-1 7 21

References

Adobe PDF Library 10.0.1 Adobe InDesign CS6 (Macintosh)

Related Documents

Preview SENCO FN91T1 Pneumatic Framing Nailer Parts Reference Guide
Official parts reference guide for the SENCO FN91T1 3 1/2" Pneumatic Framing Nailer, including a comprehensive list of replacement parts and their corresponding numbers.
Preview SENCO F-15XP Gen. 2 Cordless Finish Nailer Parts Reference Guide
Comprehensive parts reference guide for the SENCO F-15XP Gen. 2 Cordless Finish Nailer. Includes detailed diagrams descriptions, part numbers, and descriptions for all assemblies and components. Essential for maintenance and repair.
Preview SENCO FramePro701XP & FramePro751XP Framing Nailers: Operating Instructions and Safety Guide
Comprehensive operating instructions, safety warnings, maintenance procedures, troubleshooting tips, technical specifications, and warranty information for the SENCO FramePro701XP and FramePro751XP pneumatic framing nailers.
Preview SENCO SCP40XP Pneumatic Concrete Pinner Parts Reference Guide
Detailed parts reference guide for the SENCO SCP40XP Pneumatic Concrete Pinner, including schematic diagrams and a comprehensive parts list with descriptions in English, Spanish, and French.
Preview SENCO F-LXP Cordless Stapler Parts Reference Guide
Comprehensive parts reference guide for the SENCO F-LXP Cordless Stapler, featuring detailed diagrams and part listings in English, Spanish, and French. Includes safety information and contact details.
Preview SENCO SN71P1 Pneumatic 2 1/2" Coil Siding Nailer - Operating Instructions
Comprehensive operating instructions for the SENCO SN71P1 Pneumatic 2 1/2" Coil Siding Nailer, covering safety warnings, functional operation, maintenance, troubleshooting, specifications, and warranty.
Preview SENCO TN21L1 Micro Pinner Parts Reference Guide
Detailed parts reference guide for the SENCO TN21L1 Micro Pinner, including exploded view diagrams, part numbers, and a comprehensive replacement parts list in English, Spanish, and French. Find information on components, repair kits, and available plugs for this pneumatic tool.
Preview SENCO SNS41 Parts Reference Guide and Repair Kit Information
Comprehensive parts reference guide for the SENCO SNS41 pneumatic nail gun, including a detailed parts list, exploded diagrams, and information on available repair kits and accessories.