Introduction
This service manual provides detailed information for the installation, operation, maintenance, and service of Hoshizaki Modular Crescent Cuber icemakers. It is intended for qualified service technicians and covers a range of models including the KM-1301, KM-1601, KM-1900, KM-2200, and KM-2600 series, with variations for air-cooled, water-cooled, and remote models.
Proper adherence to the guidelines within this manual is crucial for ensuring the safe and efficient performance of the appliance, as well as maintaining warranty coverage. The manual includes comprehensive sections on construction, circuit diagrams, sequences of operation, service diagnosis, controls, adjustments, and technical specifications.
For assistance or further inquiries, Hoshizaki Technical Support can be contacted via phone at 1-800-233-1940 or (770) 487-2331, or by email at techsupport@hoshizaki.com. Hoshizaki America, Inc. is located at 618 Highway 74 South, Peachtree City, GA 30269.
Key Information
- Brand: Hoshizaki
- Product Type: Modular Crescent Cuber Icemaker
- Models Covered: KM-1301SAJ/3, SWJ/3, SRJZ/3; KM-1601SAJ/3, SWJ/3, SRJZ/3; KM-1900SAJ/3, SWJ/3, SRJZ/3; KM-2200SWJ3, SRJZ3; KM-2600SWJ3, SRJZ3
- Document Type: Service Manual
- Primary Language: English
Important Safety Precautions
WARNING: This appliance should only be serviced by qualified technicians. Failure to follow installation, operation, and maintenance instructions can lead to adverse effects on safety, performance, component life, warranty coverage, and may result in costly water damage. Ensure all electrical connections are properly wired and grounded according to national, state, and local codes. Never alter the appliance, as this can result in serious injury or fire.
NOTICE: To reduce the risk of water damage, install the appliance in a location that stays above freezing (45°F to 100°F / 7°C to 38°C). Do not leave the appliance on during extended periods of non-use or in sub-freezing temperatures without proper preparation.
