Sonic the Hedgehog Studio Polis Zone Playset

Parts List

• A: Sonic figure x1
• B: Checkpoint x3
• C: Special Ring x1
• D: Ring x3
• E: Figure Slide Parts x1
• F: Micro Drop x1
• G: Background Parts (Small) x1
• H: Background Parts (Large) x1
• I: Base x2

Assembly Method

1. Connect the left end of one base (I) to the groove on the right end of the other base (I) to join them.

   [Diagram: Two base pieces are shown being joined together.]

2. Following the diagram, attach the Micro Drop (F) to the Small Background Parts (G). Then, attach the assembled background parts to the base parts connected in step 1. Also attach the Large Background Parts (H) to the base parts connected in step 1.

   [Diagram: Shows attaching F to G, then attaching G and H to the joined bases.]

3. Following the diagram, attach the Checkpoint (B), Special Ring (C), and Figure Slide Parts (E) to the base parts connected in step 1.

   [Diagram: Shows attaching B, C, and E to the assembled base.]

4. Following the diagram, attach the Ring (D) and Sonic (A) to the Figure Slide Parts (E). Sonic can be manually moved along the slide mechanism. The Checkpoint (B) and Micro Drop (F) can also be manually moved.

   [Diagram: Shows attaching D and A to E. Then shows Sonic moving on the slide, and B and F being manually operated.]